• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.1
• /
• pp.16-22
• /
• 2006

Mineral and heavy metal contents were determined in three brown edible seaweeds (sea mustard, Undaria pinnatifida; seaweed fusiforme, Hizikia fusiforme; sea tangle, Laminaria japonica) collected from Gijang and Wando in Korea, and two green seaweeds (sea lettuce, Enteromorpha prolifera; green laver, Monostroma nitidum) collected from Gijang. Seaweeds contained high proportions of ash (13.8-24.8%) and sulfate (1.08-3.25%). In brown seaweeds, ash contents (24.5-24.8%) were higher than in green seaweeds (13.8-15.2%). The differences of mineral contents were remarkable in both Gijang and Wando and in 5 various kinds of seaweeds. Brown seaweeds contained higher amounts of both macro-minerals (657-13,947 mg/100 g; Ca, Mg, Na, K) and trace elements (0.27-12.98 mg/100 g; Fe, Al, Zn, Mn, Cr, Cu, Ni), and green seaweeds also had relatively higher amounts of both macro-minerals (233-5,279 mg/100 g) and trace elements (0.26-10.61 mg/100 g).

• Clean Technology
• /
• v.26 no.4
• /
• pp.263-269
• /
• 2020

Zeolite was synthesized hydrothermally using the water-treatment sludge, and the effects of various synthesis parameters like reaction temperature, reaction time, and Na2O/SiO2 molar ratio on the crystallization of zeolite were investigated. Crystal structure, physical property, and thermal stability of zeolite crystals were characterized by X-ray powder diffraction, FTIR spectroscopy, BET nitrogen adsorption, and TGA measurements. The removal efficiencies of nitrogen in ammonia, heavy metal ions, and TOC were calculated to evaluate zeolite's adsorption capacity. The primary chemical composition of water-treatment sludge was 28.79% Al2O3 and 27.06% SiO2. The zeolites were synthesized by merely employing the water-treatment sludge as silica and alumina sources without additional chemicals. Zeolite crystals synthesized through the water-treatment sludge were confirmed as an A-type zeolite structure. Zeolite A had the highest crystallinity obtained from a gel with the molar composition 2.1Na2O-Al2O3-1.6SiO2-65H2O after 5 h at a temperature of 90 ℃. The specific surface area of zeolite obtained was 55 ㎡ g-1, which was higher than commercial zeolite A. The removal efficiency of nitrogen in ammonia was 68% after 3 h of reaction time, while the removal efficiencies of Pb2+ and Cd2+ ions were 99.1% and 99.3%, respectively. These results indicate active ion exchange between Pb2+ or Cd2+ ion and Na+ ion in the zeolite framework. The adsorption experiments on the different zeolite addition conditions were performed for 3 h with 300 ppm humic acid. Based on the results, TOC's highest efficiency was 83% when 5 g of zeolite was added.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.250-258
• /
• 1999

The purpose of this study was to compare heavy metal concentrations in uncontaminated soil with those in soil influenced by industrial activities, and to investigate the relationship between change of heavy metal content and the kind of industry at the Iksan 2nd Industrial Complex that has started since 1995. Soils sampled in 0-3 cm and 3-6 cm soil depth, respectively were analized for content of Cd, Cu, Ni, Pb and Zn. The content of Cd in soil layer of 0 to 3 cm was 0.07-4.37ppm range, average concentration was 0.516ppm and 3-6 cm was 0.07-8.52ppm range, average concentration was 0.380ppm. Area of the chemicals, dyes and metal products manufacturing were higher than the other manufacturing area in Industrial Complex. The content of Cu in soil layer of 0 to 3 cm was 0.61-42.62ppm range, average concentration was 11.087ppm and 3-6 cm was 0.16-35.45ppm range, average concentration was 7.578ppm. Area of the metal products manufacturing were higher than the other manufacturing area in Industrial Complex. The content of Ni in soil layer of 0 to 3 cm was 0.19-15.93ppm range, average concentration was 5.525ppm and 3-6 cm was 0.39-15.59ppm range, average concentration was 5.310ppm. Area of the metal and chemical products manufacturing were higher than the other manufacturing area in Industrial Complex. The content of Pb in soil layer of 0 to 3 cm was 3.10-55.75ppm range, average concentration was 23.543ppm and 3-6 cm was 3.35-46.55ppm range, average concentration was 19.198ppm. Area of the chemicals and metal products manufacturing were higher than the other manufacturing area in Industrial Complex. The content of Zn in soil layer of 0 to 3 cm was 26.50-943.00ppm range, average concentration was 158.329ppm and 3-6 cm was 35.45-882.45ppm range, average concentration was 127.914ppm. Area of the chemicals and metal products manufacturing were higher than the other manufacturing area in Industrial Complex. As the result, this study was to compare Cd, Cu, Ni, Pb, Zn average concentration in uncontaminated soil of world with those in soil, that Cu, Ni were uncontaminated concentration level, Cd was somewhat higher compare with the concentration level of world, Pb and Zn were very higher. Soil contaminated degree of Iksan 2nd Industrial Complex was known a difference by type of industrial activities(chemical, dyes and metal of products)

• Journal of Food Hygiene and Safety
• /
• v.26 no.3
• /
• pp.273-282
• /
• 2011

This study established hazards which may cause risk to human at farm during cultivation stage of paprika. Samples of plants (paprika, leaf, stem), cultivation environments (water, soil), personal hygiene (hand, glove, clothes), work utensils (carpet, basket, box) and airborne bacteria were collected from three paprika farms (A, B, C) located in Western Gyeongnam, Korea. The collected samples were assessed for biological (sanitary indications and major foodborne pathogens), chemical (heavy metals, pesticide residues) and physical hazards. In biological hazards, total bacteria and coliform were detected at the levels of 1.9~6.6 and 0.0~4.610g CFU/g, leaf, mL, hand or 100 $cm^2$, while Escherichia coli was not detected in all samples. In major pathogens, only Bacillus cereus were detected at levels of ${\leq}$ 1.5 log CFU/g, mL, hand or 100 $cm^2$, while Staphylococuus aureus, Listeria monocytogenes, E. coli O157 and Salmonella spp. were not detected in all samples. Heavy metal and pesticide residue as chemical hazards were detected at levels below the regulation limit, physical hazard factors, such as insects, pieces of metal and glasses, were also found in paprika farms. Proper management is needed to prevent biological hazards due to cross-contamination while physical and chemical hazards were appropriate GAP criteria.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.1
• /
• pp.35-43
• /
• 2023

The fine particulate structure of biochar limits its use as a heavy metal adsorbent, and makes separation of the biochar from the solution technically challenging, thereby reducing recovery of the heavy metals. To address this issue, this study prepared biochar beads under various mixing conditions and investigated their efficiency in removing Pb from aqueous solutions using adsorption models. The biochar beads were produced by mixing alginate and biochar at different ratios: alginate bead (AB), 1% biochar + bead (1-BB), 2.5% biochar + bead (2.5-BB), and 5% biochar + bead (5-BB). The results revealed that the Freundlich isothermal adsorption pattern of the biochar beads to Pb was of the L-type. The highest Langmuir isothermal adsorption capacity (28.736 mg/g) was observed in the 2.5-BB treatment. The dominant mechanism among the kinetic adsorption characteristics of biochar beads for Pb was chemical adsorption. Additionally, the optimal pH range for Pb adsorption was found to be between 4 and 5.5. The highest Pb removal efficiency (97.9%) was achieved when 26.6 g/L of biochar beads were used. These findings suggest that biochar beads are an economical and highly efficient adsorbent that enables separation and recovery of fine biochar particles.