• 한국해양공학회지
• /
• 제30권2호
• /
• pp.84-90
• /
• 2016

In this study, a six degree-of-freedom motion analysis of a wind-wave hybrid platform equipped with numerous wave energy converters (WECs) was carried out. To examine the effect of the WECs on the platform, an analysis of one-way coupling was carried out, which only considered the power take-off (PTO) damping of the static WECs on the platform. The equation of motion of a floating platform with mooring lines in the time domain was established, and the responses of the one-way coupled platform were then compared with the case of a platform without any coupling effects from the WECs. The hydrodynamic coefficients and wave exciting forces were obtained from the 3D diffraction/radiation pre-processor code WAMIT based on the boundary element method. Then, an analysis of the dynamic responses of the floating platform with or without the WEC effect in the time domain was carried out. All of the dynamics of a floating platform with multiple wind turbines were obtained by coupling FAST and CHARM3D in the time domain, which was further extended to include additional coupled dynamics for multiple turbines. The analysis showed that the PTO damping effect on platform motions was negligible, but coupled effects between multiple WECs and the platform may differentiate the heave, roll, and pitch platform motions from the one without any effects induced by WECs.

• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.79-86
• /
• 2012

It is very important to investigate and understand the motion of a FPSO on waves because green water phenomenon occurs owing to the relative motions between incident waves and a ship on them. In this research, both experimental and some numerical approaches have been performed in head sea conditions with regular waves. As an object model of this research, a FPSO model is set free to heave and pitch during the experiments. Also, the motions of the FPSO model which are the results of the experiments are used for the corresponding numerical computations. The purpose of this study is to clarify the effect of bow flare on green water load. In this research, it is found that the amount of green water entered from the side of bow is decreased by the increase of bow flare angle. Moreover, the relation between the green water on the bow upper deck and the impact load on the vertical wall located at turrethead is investigated. The results of this research could be used as one of the fundamental data to design bow flares. Also, an optimized bow flare angle is proposed in this study.

• 한국해양공학회지
• /
• 제31권3호
• /
• pp.202-207
• /
• 2017

This paper presents the results of an experimental study on the motions and mooring characteristics of a floating vertical axis wind turbine system. Based on a comparison of regular wave experiment results, the motions of structures with different types of mooring are almost the same. Based on the tension response results of a regular wave experiment with a catenary mooring system, the mooring lines in front of the structure have a larger tension effect than the back of the structure by the drifted offset of the structure. The dynamic response spectrum of the structure in the irregular wave experiments showed no significant differences in response to differences in the mooring system. As a result of the comparison of the tension response spectra, the mooring lines have a larger value with a drifted offset for the structure, as shown in the previous regular wave experiment. The results of the dynamic response of the structure under irregular wave and wind conditions showed that the heave motion response is influenced by the coupled effect with the mooring lines of the surge and pitch motion due to the drifted offset and steady heeling. In addition, the mooring lines in front of the structure have a very large tension force compared to the mooring lines in back of the structure as a result of the drifted offset of the structure.

• 한국해양공학회지
• /
• 제26권6호
• /
• pp.53-58
• /
• 2012

An experimental study on the hydrodynamic performance of a backward bent duct buoy (BBDB) was performed in a 2D wave tank. The BBDB is one of the promising oscillating water column (OWC) types of floating wave energy converters. Two different corner-shaped BBDBs (sharp-corner and round-corner) were used to measure the maximum chamber surface elevations and body motions for various incident wave conditions, and their hydrodynamic characteristics were compared. In order to investigate the effect of the pneumatic pressure inside the chamber, the heave and pitch angle interacted with elevations were compared for both open chamber and partially open chamber BBDBs. From the comparison study, the deviation in the chamber surface elevations between the two shapes of BBDBs was found to be significant near the resonance period, which may be explained by viscous energy loss. It was also found that the pneumatic pressure noticeably affected the chamber surface elevation and body motions.

• 한국항해항만학회지
• /
• 제42권2호
• /
• pp.127-136
• /
• 2018

The motion response of floating structures is of significant concern in marine engineering. Floating structures can be disturbed by waves, winds, and currents that create undesirable motions of the vessel, therefore causing challenges to its operation. For a floating structure, mooring lines are provided in order to maintain its position; these should also produce a restoring force when the vessel is displaced. Therefore, it is important to investigate the tension of mooring lines and the motion responses of a twin barge when moored to guarantee the safety of the barge during its operation. It is essential to precisely identify the characteristics of the motion responses of a moored barge under different loading conditions. In this study, the motion responses of a moored twin barge were measured in regular waves of seven different wave directions. The experiment was performed with regular waves with different wavelengths and wave directions in order to estimate the twin-barge motions and the tension of the mooring line. In addition, the motion components of roll, pitch, and heave are completely free. In contrast, the surge, sway, and yaw components are fixed. In the succeeding step, a time-domain analysis is carried out in order to obtain the responses of the structure when moored. As a result, the Response Amplitude Operator (RAO) motion value was estimated for different wave directions. The results of the experiment show that the motion components of the twin barge have a significant effect on the tension of the mooring lines.

• 한국철도학회논문집
• /
• 제17권4호
• /
• pp.233-244
• /
• 2014

이 연구에서는 자기부상열차-가이드웨이 상호작용 해석기법을 현장에서 계측된 자료를 활용하여 검증한다. 자기부상열차의 차체와 대차는 병진운동과 회전운동을 하는 강체 질량으로 모사한다. 대차의 부상전자석에서 발생하는 부상력은 능동 제어 알고리즘에 의해 제어된다. 가이드웨이는 Euler-Bernoulli beam을 사용하여 수치 모형을 구성한다. 대차의 회전 운동으로 인한 부상공극의 변화와 가이드웨이에 작용하는 위치의 변화를 엄밀히 고려하여 자기부상열차-가이드웨이 상호작용계의 동적거동 해석을 수행한다. 인천공항 자기부상철도 노선에서 계측된 실측 자료를 이용하여 해석기법을 검증한다. 해석 결과와 현장 계측 결과의 비교를 통해 해석 기법의 정확성을 검증하고, 대상 구조물이 설계 기준을 만족하도록 안전하게 설계되고 시공되었음을 확인한다.

• 대한조선학회논문집
• /
• 제55권3호
• /
• pp.187-195
• /
• 2018

Ship's bottom slamming has been studied by many researchers for a very long time. But still some ships suffer structure damages caused by the bottom slamming impacts. This paper presents a practical computation method of the design impact pressure due to ship's bow bottom slamming. Large heave and pitch motions of a rigid hull ship are simulated by the nonlinear strip method in time domain and the relative colliding velocity between the bow bottom and the water surface is calculated using the simulated ship motions. The bottom slamming impact pressure is calculated as a product of the relative colliding velocity squared and the bottom slamming pressure coefficient that is obtained by modification of the SNAME pressure coefficients based on Ochi's slamming experiments. Not only the bottom slamming pressures but also the required bottom plate thicknesses are calculated and compared with those of the classification society rules. The comparisons show good agreements and it is confirmed that the present method is practically very useful for the bottom structure design against ship's bow bottom slamming impacts.

• Ocean Systems Engineering
• /
• 제8권4호
• /
• pp.427-439
• /
• 2018

Floating Production Storage and Offloading (FPSO) units have the advantages of their ability to provide storage and offloading capabilities which are not available in other types of floating production systems. In addition, FPSOs also provide a large deck area and substantial topsides payload capacity. They are in use in a variety of water depths and environments around the world. It is a good solution for offshore oil and gas development in fields where there is lack of an export pipeline system to shore. However due to their inherently high motions in waves, they are limited in the types of risers they can host. The Low Motion FPSO (LM-FPSO) is a novel design that is developed to maintain the advantages of the conventional FPSOs while offering significantly lower motion responses. The LM-FPSO design generally consists of a box-shape hull with large storage capacity, a free-hanging solid ballast tank (SBT) located certain distance below the hull keel, a few groups of tendons arranged to connect the SBT to the hull, a mooring system for station keeping, and a riser system. The addition of SBT to the floater results in a significant increase in heave, roll and pitch natural periods, mainly through the mass and added mass of the SBT, which significantly reduces motions in the wave frequency range. Model tests were performed at the Korea Research Institute of Ships & Ocean Engineering (KRISO) in the fall of 2016. An analytical model of the basin model (MOM) was created in Orcaflex and calibrated against the basin-model. Good agreement is achieved between global performance results from MOM's predictions and basin model measurements. The model test measurements have further verified the superior motion response of LM-FPSO. In this paper, numerical results are presented to demonstrate the comparison and correlation of the MOM results with model test measurements. The verification of the superior motion response through model test measurements is also presented in this paper.

• 한국해양공학회지
• /
• 제37권6호
• /
• pp.273-281
• /
• 2023

Recently, offshore structures for eco-friendly energy, such as wind and solar power, have been developed to address the problem of insufficient land space; in the case of energy generation, they are designed on a considerable scale. Therefore, the scalability of offshore structures is crucial. The Korea Research Institute of Ships & Ocean Engineering (KRISO) developed multi-linked floating offshore structures composed of floating bodies and connection beams for floating photovoltaic systems. Large-scale floating photovoltaic systems are mainly designed in a manner that expands through the connection between modules and demonstrates a difference in structural response with connection conditions. A fluid-structure coupled analysis was performed for the multi-linked floating offshore structures. First, the wave load acting on the multi-linked offshore floating structures was calculated through wave load analysis for various wave load conditions. The response amplitude operators (RAOs) for the motions and structural response of the unit structure were calculated by performing finite element analysis. The effects of connection conditions were analyzed through comparative studies of RAOs and the response's maximum magnitude and occurrence location. Hence, comparing the cases of a hinge connection affecting heave and pitch motions and a fixed connection, the maximum bending stress of the structure decreased by approximately 2.5 times, while the mooring tension increased by approximately 20%, confirmed to be the largest change in bending stress and mooring tension compared to fixed connection. Therefore, the change in structural response according to connection condition makes it possible to design a higher structural safety of the structural member through the hinge connection in the construction of a large-scale multi-linked floating offshore structure for large-scale photovoltaic systems in which some unit structures are connected. However, considering the tension of the mooring line increases, a safety evaluation of the mooring line must be performed.

• 해양환경안전학회지
• /
• 제22권5호
• /
• pp.564-575
• /
• 2016

본 연구에서는 KVLCC2의 파랑 중 부가저항과 운동을 Unsteady Reynolds-Averaged Navier-Stokes(URANS) 방법과 3차원 포텐셜법을 이용하여 추정하였다. 수치해석은 3가지 선박속도(설계, 운항, 정지 속도)에서 다양한 파랑조건에서의 선박의 부가저항 및 수직운동(상하 및 종 동요 응답)의 추정에 대해 수행되었다. 첫째, CFD와 3차원 포텐셜 방법을 이용하여 규칙파에서의 선박속도와 파랑조건에 따른 선박의 부가저항과 운동을 추정하고 실험값과의 비교를 통해 두 수치 해석법의 특징을 살펴보았다. 둘째, CFD를 이용한 선박의 속도별 비정상 파형 분포와 선박의 부가저항 및 운동의 시간이력에 대해 해석하였다. 수치 격자계에 대한 수렴도를 확인하였고 수치계산과 모형시험 결과를 비교하여 사용한 수치 기법들을 체계적으로 검증 하였다. 이를 통해 본 연구에 적용된 수치해석법들의 신뢰성과 선속변화에 따른 파랑 중 부가저항과 선박의 수직운동에 대한 관계를 확인하였다.