• 제목/요약/키워드: heating information

검색결과 516건 처리시간 0.036초

VGF법을 사용한 GaAs 단결정 성장시 계의 구성요소가 고액계면의 형상에 미치는 영향 (The effect of the system factors on the shape of the S/L interface in GaAs single crystal grown by VGF method)

  • Seung-Ho Hahn;Hyung-Tae Chung;Young-Kyu Kim;Jong-Kyu Yoon
    • 한국결정성장학회지
    • /
    • 제4권1호
    • /
    • pp.33-41
    • /
    • 1994
  • 단결정 성장과정에서 고액계면의 위치와 형상이 결정의 품질에 영향을 준다는 사실은 이미 잘 알려져 있다. 따라서 이를 결정해 주는 노내 온도분포의 파악은 매우 중요하다. 본 연구에서는 VGF 단결정법을 대사응로 발열체의 온도만을 이용하여 노내 온도분포를 구할 수 있는 프로그램을 개발하였으며,이를 사용하여 지지봉 및 도가니의 재질과 크기가 고액계면의 형상에 미치는 영향을 검토해 보았다. 지지봉의 반경이 클수록, 열전도도가 작을수록 평활한 고액계면이 나타나 . 열전도도가 등방성을 가진 도가니의 경우, 열확산계수의 증가에 따라 고액계면이 더 오목해지는 경향을 보였다. PBN과 석영 도가니의 계산 결과 비교를 통하여 도가니 열전도돋의 이방성이 고액계면에 미치는 영향을 고찰해 본 결과, 계면의 위치에 따라서 다른 양상을 보인다는 것을 알았다.것을 알았다.

  • PDF

저압용 vertex tube의 기하학적형상에 따른 에너지 분리특성에 관한 실험적 연구 (An Experimental Study on the Energy Separation in the Geometric Setup of a Low Pressure Vortex Tube)

  • 오동진;류정인
    • 에너지공학
    • /
    • 제11권3호
    • /
    • pp.276-282
    • /
    • 2002
  • 본 논문에서는 압축공기를 작동매체로 한 저압용 vortex tube에 대한 에너지분리 과정을 상세히 연구하였다. 먼저 vortex tube에서 에너지 분리되어 나오는 온공기와 냉공기의 온도변화에 대하여 실험하였고, vortex tube의 안쪽표면의 최대벽면온도 변화와 vortex tube내의 온도분포를 통하여 vortex tube내 유동장에서의 정체점의 위치에 대한 유용한 정보를 얻게되었다. 이를 바탕으로 vortex tube의 최적 길이와 throttle의 형상, sleeve에 따른 에너지분리과정 등을 실험을 통하여 알아보았다. 또한 본 연구에서는 디젤기관의 배기에 적용하기 위한 외통을 사용하였다. 이때 vortex tube에서 나오는 은공기가 180$^{\circ}$돌아 나오면서 vortex tube의 바깥쪽 벽면을 가열하게 된다. 이러한 기하학적 형상을 통하여 에너지분리효과가 증대됨으로 인하여 디젤기관의 배기가스에 적용 시 고온유동의 온도를 높이고자함에 본 연구의 목적을 두고자한다.

저손실 융착접속을 이용한 광자결정 광섬유 간섭계 (Fiber Interferometers Based on Low Loss Fusion Splicing of Photonic Crystal Fibers)

  • 안진수;김길환;이관일;이경식;이상배
    • 한국광학회지
    • /
    • 제21권5호
    • /
    • pp.200-205
    • /
    • 2010
  • 본 논문에서는 포토닉 밴드갭 광섬유(Photonic Bandgap Fiber: PBGF) 사이에 중공광섬유(Hollow Optical Fiber: HOF)를 융착 접속시켜 만든 광섬유 간섭계와 넓은 모드 면적을 가지는 광자결정 광섬유(Large Mode Area-Photonic Crystal Fiber: LMA-PCF)사이에 HOF를 융착접속시켜 만든 광섬유 간섭계의 온도 및 스트레인에 대한 광학적 특성을 분석하였다. PBGF 또는 LMA-PCF와 HOF의 융착접속시 광섬유내 공기구멍을 최대한 유지하도록 융착조건을 최적화하여 접속 손실을 줄였다. PBGF와 HOF로 구성된 광섬유 간섭계의 온도 및 스트레인에 대한 민감도는 각각 15.4 pm/$^{\circ}C$와 0.24 pm/${\mu}\varepsilon$으로 측정되었으며, LMA-PCF와 HOF로 구성된 광섬유 간섭계의 온도 및 스트레인에 대한 민감도는 각각 17.4 pm/$^{\circ}C$와 0.2 pm/${\mu}\varepsilon$으로 측정되었다.

스마트 폰을 이용한 지능형 홈 네트워크 시스템 구현 (The Implement of Intelligent Home Network System on Smart Phone)

  • 이태웅;손철수;김원중
    • 한국전자통신학회논문지
    • /
    • 제6권4호
    • /
    • pp.505-509
    • /
    • 2011
  • 홈 네트워크 시스템은 조명, 가스, 난방 기기 등 가정 내의 다양한 정보기기들을 네트워크로 연결하여 집안내부에서 제어하고 휴대폰 또는 스마트 폰 그리고 개인용 컴퓨터로 외부에서 제어할 수 있다. 홈 네트워크 시스템을 구성하는 통합 서버와 월 패드는 고가이고 네트워크 인프라를 구축하여야 하는 단점이 있다. 본 논문에서는 이러한 홈 네트워크의 단점을 보완하는 스마트 폰을 이용한 지능형 홈 네트워크 시스템을 제안하였다. 현재 널리 보급된 스마트 폰은 고 사양 입출력 장치로 기존 월 패드의 사용자 인터페이스 부분인 디스플레이와 터치스크린을 대체하고, 홈 네트워크의 관리 및 제어 기능을 스마트 폰에 집중함으로써 저비용으로 보급형 월패드를 구현하였다.

나노구조를 기반으로 하는 Bi2Te3 소결과 그 시간에 따른 열전 특성 (The Effect of Sintering on the Thermoelectric Properties of Bulk Nanostructured Bismuth Telluride (Bi2Te3))

  • 유수산나;강민석;김도경;문경숙;;구상모
    • 한국전기전자재료학회논문지
    • /
    • 제27권9호
    • /
    • pp.561-565
    • /
    • 2014
  • Thermoelectric materials have been the topic of intensive research due to their unique dual capability of directly converting heat into electricity or electrical power into cooling or heating. Bismuth telluride ($Bi_2Te_3$) is the best-known commercially used thermoelectric material in the bulk form for cooling and power generation applications In this work we focus on the large scale synthesis of nanostructured undoped bulk nanostructured $Bi_2Te_3$ materials by employing a novel bottom-up solution-based chemical approach. Spark plasma sintering has been employed for compaction and sintering of $Bi_2Te_3$ nanopowders, resulting in relative density of $g{\cdot}cm^{-3}$ while preserving the nanostructure. The average grain size of the final compacts was obtained as 200 nm after sintering. An improved NS bulk undoped $Bi_2Te_3$ is achieved with sintered at $400^{\circ}C$ for 4 min holding time.

$CO_2$ 배출문제와 냉열이용 지역집단 냉방에너지에 관한 통합적 융합기술 연구 (A Study on the Integrated Fusion Technology Between a Carbon Dioxide Emission and a District Cooling Energy Using a Cold Energy)

  • 김청균
    • 한국가스학회지
    • /
    • 제10권4호
    • /
    • pp.34-40
    • /
    • 2006
  • 본 논문은 지역집단 냉방에너지 공급시스템과 환경보호정책에 관한 융합기술을 에너지절약과 미이용 에너지인 냉열자원의 활용성을 함께 다루고 있다. 지역집단 냉 난방 시스템은 에너지를 절약하고, 비용을 절감하며, 안전성을 확보할 수 있는 효과적인 기술이다. 에너지가 생활수준의 향상에 긍정적인 영향을 주기 위해서는 에너지 절약과 환경보호정책을 균형감 있게 고려해야 한다. 냉열에너지는 LNG를 기화하는 과정에서 생산할 수 있지만, 바다의 심층수와 빙축열에서도 얻을 수 있다. 지역집단 냉방에너지는 아파트, 사무실, 공장설비 등에 냉열공급 파이프라인을 통하여 공급하게 된다. LNG 냉열에너지는 전기에너지와 냉매를 사용하여 작동하는 기존의 에어컨 시스템을 대체할 수 있는 경쟁력 높은 에너지이다. 청정에너지이고 운전비용을 줄이는 것으로 알려진 LNG 냉열은 $CO_2$와 같은 대기오염원과 자연환경에 유해한 냉매방출을 방지할 수 있다. 본 연구에서는 LNG 냉열에너지의 사용과 에너지 절약, 그리고 환경보존에 중요한 영향을 미치는 융합기술에 대한 유익한 정보를 제공한다.

  • PDF

에너지 데이터의 순위상관계수 기반 건물 내 오작동 기기 탐지 (Rank Correlation Coefficient of Energy Data for Identification of Abnormal Sensors in Buildings)

  • 김나언;정시현;장보연;김종권
    • 정보과학회 논문지
    • /
    • 제44권4호
    • /
    • pp.417-422
    • /
    • 2017
  • 비정상행위 탐지는 데이터로부터 특징을 추출하여 정상 행위 모델을 만들어, 이 정상 모델로부터 얼마나 벗어나 있는 가를 찾아내어 탐지하는 기법이다. 즉, 특정 기기가 생성하는 데이터를 기반으로 기기의 오류를 탐지하거나 사회망 데이터에서의 사용자 행위 변화를 찾아내어 비정상행위를 탐지하는 데 활용할 수 있다. 본 논문에서는 순위 상관 계수를 이용하여 건물 내의 기기의 비정상적인 데이터를 탐지하고자 한다. 에너지 절약 문제에 대한 관심이 높아짐에 따라 에너지를 효율적으로 사용하기 위해 여러방법들이 제안되었다. IT 기술의 발달과 더불어 공조 시스템(HVAC)이 건물에 도입되어 활용되고 있으며, 이 시스템을 통하여 에너지 소비의 문제점을 찾고 에너지를 효율적으로 관리할 수 있다. 따라서 본 논문은 공조 시스템에 속한 각 기기간의 순위 관계 변화를 관찰함으로써 이상 현상 탐지의 효율성을 높이는 방법을 제안하며, 사회망 데이터 내에서의 비정상행위 탐지 가능성도 함께 제안한다.

단일필라멘트와 다중필라멘트 초전도 코일의 교류 전류에 의한 발열 특성 비교 평가 (A Comparison Study of Heat Loss Characteristics in Monofilament and Multifilament Superconducting Coils Driven with AC Currents)

  • 황성민;김기웅;강찬석;이성주;이용호
    • Progress in Superconductivity
    • /
    • 제13권2호
    • /
    • pp.111-116
    • /
    • 2011
  • Since superconducting wires have no resistance, electromagnets based on the superconducting wires produce no resistive heating with DC current as long as the current does not exceed the critical current of the wire. However, unlike resistive wires, superconducting wires exhibit AC heat loss. Embedding fine superconducting filaments inside copper matrix can reduce this AC loss to an acceptable level and opens the way to AC-capable superconducting coils. Here, we introduce an easy and accurate method to measure AC heat loss from sample superconducting coils by measuring changes in the rate of gas helium outflow from the liquid helium dewar in which the sample coil is placed. This method provides accurate information on total heat loss of a superconducting coil without any size limit, as long as the coil can fit inside the liquid helium dewar. With this method, we have evaluated AC heat loss of two superconducting solenoids, a 180-turn solid NbTi wire with 0.127 mm diameter (NbTi coil) and a 100-turn filamented wire with 1.4 mm diameter where 7 NbTi filaments were embedded in a copper matrix with copper to NbTi ratio of 6.7:1 (NbTi-Cu coil). Both coils were wound on 15 mm-diameter G-10 epoxy tubes. The AC heat losses of the NbTi and NbTi-Cu coils were evaluated as $53{\pm}4.7\;{\mu}W/A^2Hzcm^3$ and $0.67{\pm}0.16\;{\mu}W/A^2Hzcm^3$, respectively.

기후변화에 따른 벼 적정 등숙기간의 변동과 대책 (Climate Change Impacts on Optimum Ripening Periods of Rice Plant and Its Counter-Measure in Rice Cultivation)

  • 윤성호;이정택
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2000년도 추계 학술대회지
    • /
    • pp.28-45
    • /
    • 2000
  • It was unusual crop weather for 1998 and 1999 compared with normal in Korea. The consecutive days of the optimum ripening period for rice plant that had daily mean temperature 21-23C for 40 days after heading, increased with long anomalies in 1998-99. The air temperature during ripening period was much higher than the optimum temperature and lower sunshine hour than normal in the local adaptability tests of newly developed rice lines during those years. In response of rice cultivation to warming and cloudy weather during crop season, the yield shall be decreased. Most scientists agree that the rate of heating is accelerating and temperature change could become increasingly disruptive. Weather patterns should also become more erratic. Agrometeorologists could be analyzed yearly variations of temperature, sunshine hour and rainfall pattern focused on transient agroclimate change for last a decade. Rice agronomists could be established taking advantage of real time agricultural meteorology information system for fertilization, irrigation, pest control and harvest. Also they could be analyzed the characteristics of flowering response of the recommended and newly bred rice cultivars for suitable cropping plan such as cultural patterns and sowing or transplanting date. Rice breeders should be deeply considered introducing the characteristics of basic vegetative type of flowering response like Tonsil rices as prospective rice cultivars corresponding to global warming because of the rices needed higher temperature at ripening stage than Japonica rices, photoperiod sensitive and thermo-sensitive ecotypes

  • PDF