• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 춘계학술발표논문집
• /
• pp.450-453
• /
• 2009

Compositional design and optimization of processing parameters are key factors for controlling and improving the properties of SiC-based electroconductive ceramic composites. Compare economic estimation of SiC ceramic heater with sheathe heater are as followings. (1) Temperature rising time of sheath heater is 1.1 times faster than SiC ceramic heater. (2) Heating insulation of SiC ceramic heater is 2.7 times larger than sheath heater. If SiC ceramic heater is one body type of a product application, contact resistance will decrease. I think that temperature initial rising time is faster than now. The more SiC ceramic heater is used for a long time, the more economic benefit is larger in the view point of heat insulation.

• Transactions on Electrical and Electronic Materials
• /
• 제17권4호
• /
• pp.189-195
• /
• 2016

Micro Hotplate (MHP) is the key component in micro-sensors, particularly gas sensors. Indeed, in metal oxide gas sensors MOX, micro-heater is used as a hotplate in order to control the temperature of the sensing layer which should be in the requisite temperature range over the heater area, so as to detect the resistive changes as a function of varying concentration of different gases. Hence, their design is a very important aspect. In this paper, we have presented the design and simulation results of a meander micro heater based on three different materials - platinum, titanium and tungsten. The dielectric membrane size is 1.4 mm × 1.6 mm with a thickness of 1.4 μm. Above the membrane, a meander heating film was deposed with a thickness of 100 nm. In order to optimize the geometry, a comparative study by simulating two different heater thicknesses, then two inter track widths has also been presented. Power consumption and temperature distribution were determined in the micro heater´s structure over a supply voltage of 5, 6, and 7 V.

• 한국가시화정보학회지
• /
• 제21권3호
• /
• pp.23-32
• /
• 2023

This study aims to explore the heat transfer and flow phenomena inside an instant water heater and the influence of the design parameters of the water heater on the heating performance was investigated by 3-D numerical simulations considering heat convection. The design parameters are the heating ceramic dimension, the power of the heating device, and the water flow rate. The results show that a reasonable space for the heating device is required to optimize the heating performance. It is desirable to design higher heating device as possible for a given electric power. There exists a critical water flow rate that best meets the heating performance. The change in electric power has no impact on the flow phenomena and heating performance.

• 한국전산유체공학회지
• /
• 제10권3호
• /
• pp.63-69
• /
• 2005

The COMS, the first meteorological geostationary satellite in Korea, is under development by KARI. The radiator size and the heater power for the thermal control of COMS are calculated using an analytic method. The total radiator area of $4.85\;m^2$ and the total heater power of 794.77 W are determined at a conceptual design of COMS. The commercial software, SINDA and TRASYS, are utilized in order to compare and verify the analytic results. The results of on-orbit numerical simulation of cold and hot cases show that the radiator size and heater power obtained from the analytic method are appropriate to maintain COMS equipments within required temperature ranges.

• 동력기계공학회지
• /
• 제19권3호
• /
• pp.48-54
• /
• 2015

This paper introduced a design method of soldering station that can control two types of soldering iron heater. At design time, to distinguish two types of soldering iron heater the voltage divider rule has been applied, and the distinguished resistor is inserted to handler of soldering iron to prevent misuse by users. And an algorithm to design a PID controllers is proposed. The proposed controllers parameter which can be easily realized, and are designed by using the input output data from systems, and have outstanding ability making the output response of nonlinear systems similar to the desired one. Temperature control experiments were performed to verify the ability of the suggested controller. As a result, suggested PID controller followed the desired ones, and one soldering station can control the various type of soldering irons in real time.

• KSTLE International Journal
• /
• 제7권1호
• /
• pp.22-26
• /
• 2006

A simple finite element analysis is performed to simulate the thermal characteristics of a micro sensor package with thin film heater embedded in the glass wall of a micro-channel. In this paper, Electric characteristics of ITO sputtered heater were presented in this study, which can be used as a map of heater design in the range of available system temperature. The effects of thermo-physical properties of materials, geometrical structure and boundary condition on the thermal performance are also investigated. Finally, the design of micro-flow induced thermal sensor that is capable of measuring fluid flow with a lower flow detection limit of approximately 24pL/s is presented.

• 한국기계가공학회지
• /
• 제10권5호
• /
• pp.38-43
• /
• 2011

This study was carried out to evaluate the structural stability of hybrid type fan heater. The evaluation of structural safety of hybrid fan heater was conducted by using Ansys Workbench and CFX-11 under the design condition. The hybrid fan heater was operated by heat transfer for heat source supplied from electric heater and combustion gas. According to result of structural analysis, the maximum equivalent stress of hybrid fan heater was 150MPa when the temperature of heat transfer fluids was $150^{\circ}C$. It was found that the hybrid fan was structurally safe because the value of maximum equivalent stress was smaller than that of yield stress of the material.

• 전자공학회논문지 IE
• /
• 제47권1호
• /
• pp.6-11
• /
• 2010

본 논문은 다파장 IR-heater를 이용하여 전자부품을 솔더령 하거나 또는 회로기판으로부터 분리를 하는 전자회로기판 수리장치에 관한 설계를 다룬다. 이 IR 수리 장치는 IR-heater를 이용하여 납땜의 용융온도 설정에 따라 안정한 온도 제어 아래 목표 영역의 온도를 중가시킨다. 이렇게 설계된 시스템은 PCB와 실장된 소자에 어떠한 열 손상을 주지 않는다. 그 성능융 실험을 통해 평가한다.

• 항공우주기술
• /
• 제10권2호
• /
• pp.20-28
• /
• 2011

저궤도 관측위성의 광학탑재체는 궤도에서 임무수행을 뒷받침하는 위성 본체와 열적으로 분리되어 각각 독립된 열제어를 할 수 있도록 개발된다. 광학탑재체는 내부에 작동하는 동안에 높은 발열량으로 순간적으로 온도가 상승하는 부품 박스인 FPA(Focal Plane Assembly)의 열을 외부로 방출하기 위한 히트파이프, 방열판으로 구성된 냉각 장치(Cooling Unit)를 가지고 있다. 이러한 냉각 장치는 고온 조건에서 내부 발열을 빠르게 외부로 방출할 수 있는 히트파이프의 성능과 충분한 면적의 방열판 면적을 확보하도록 설계되어야 하고, 동시에 저온 조건에서 최저 온도 이상을 유지하는 위한 히터설계도 포함해야 한다. 본 연구에서는 먼저 FPA 냉각 장치의 열제어 요구조건과 현재 열설계 기준의 열해석 결과를 통하여 히터설계에 대한 검토와 설계 제한 조건을 분석을 하였다. 또한 열해석을 이용한 효율적이고 경제적인 위성 히터설계 방식을 제시하고, 이것을 FPA 냉각 장치의 히터설계에 적용하여 개선된 히터설계 요소를 찾았다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2309-2314
• /
• 2007

The application analysis of bubble pump on the domestic solar water heater system is presented. The system investigated in this study is a passive device, self pumping and self regulating. It was test to use the bubble pump on solar water heater system. The test experiment has been taken on the existed vacuum tube about the efficiency, working fluid temperature and pressure and circulated power. In order to check the working temperature and working pressure effectively, the bubble pump was test separated from the solar water heater. The equipment consists of the bubble pump, heater and heat exchanger. The main structure of bubble pump was design depend on the character of two phase flow. The complete system was instrumented to measure pressures, temperatures and flow-rates at various locations. The theory analysis of design bubble pump has been given and the experiment design has been included in the paper.