• Korean Journal of Environmental Biology
• /
• v.33 no.4
• /
• pp.450-458
• /
• 2015

The heat shock proteins (Hsps), one of the most highly conserved groups of proteins, play crucial roles in protecting cells against environmental stressors, such as temperature, salinity, heavy metals and pathogenic bacteria. The glutathione S-transferases (GST) have important role in detoxification of oxidative damage, environmental chemicals and environmental stress. The purpose of this study is to investigate the gene expression of Hsp70 and GST on change of temperature and salinity in Mytilus coruscus. The M. coruscus was cultured in incubator of separate temperature and salinity (8, 20, $30^{\circ}C{\times}20$‰, 25‰, 30‰) for 28 days. Ten individuals in each group were selected after each 14 and 28 days exposure. Results that the expression of Hsp70 mRNA was no significant changed in M. coruscus exposed to temperature ($8^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$) and salinity (20‰, 25‰, 30‰) for 14 days. Whereas the expression of Hsp70 mRNA was increased in exposure to temperature $30^{\circ}C$ and salinity (20‰, 25‰, 30‰) for 28 days. The expression of GST mRNA was increased in exposure to temperature $30^{\circ}C$, salinity (25‰, 30‰) for 14 days and temperature ($8^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$), salinity (20‰, 25‰, 30‰) for 28 days. These results suggest that Hsp70 and GST were played roles in biomarker gene on the thermal and salinity stress.

• Journal of the Korean Institute of Gas
• /
• v.17 no.6
• /
• pp.15-19
• /
• 2013

This paper is to analyze and study the cause of fire examples produced because of short phenomenon by electric connecting damage and contacting engine over-heating with combustible materials in engine room of vehicle. In the first example, it knew the fact that the fire produced by contacting with body of vehicle because of loosed of bracket bolt for wire fixing that installed on the transmission case the battery power cable supply the power from battery of engine room to starting motor. In the second example, it certified the fire by short phenomenon because of insulation tape melting wound wiring lined from battery to starting motor. In the third example, it sought for fire's cause that melting phenomenon the wire coating by overheated engine as the wire disconnected with connector by the vibration. Therefore, the fire of system including engine electric made in the danger the people in the car by failure of engine and other system. And than, the car's driver must manage and examine a vehicle conscientiously.

• Journal of the Korean Chemical Society
• /
• v.63 no.6
• /
• pp.440-445
• /
• 2019

It has developed a method that can recover efficiently the reproducible resources from the vehicle waste lithium second battery module. Module cell consists of copper thin film, aluminum thin film and diaphragm made with polymer between these thin films. Cell was disassembled completely without any damage in glove box and through several steps. Preferentially, cathode active material was separated from aluminum thin film at heat treatment of 400 ℃. The retrieved cathode active material was then obtained as high purity after calcining at 800 ℃ to remove residual carbon. Based on this study, it was found that rare metals such as Co, Ni, Mn and Li made up of cathode active material could recover above 80% from aluminum thin film.

• Journal of Digital Convergence
• /
• v.13 no.11
• /
• pp.171-178
• /
• 2015

The disk cover is installed to protect brake disk and calliper and it's removed right before delivering to customers. The temperature of disk cover was measured driving test vehicles(2000cc, diesel) in this study. The highest temperature measured for the driving test(120km/h-braking(0.3G)-stop-120km/h-braking(0.5G)-stop) was $260{\sim}270^{\circ}C$ in the upper part of the disk cover and the temperature varied considerably around the disk cover. It can be inferred from this temperature distribution around the cover that the major heat transfer from hot disk to cover was through convection. In other words, the hot air generated by braking friction moved up to the upper part of the disk cover. And only the upper area of the disk cover was melted down during this driving test. The thickness of disk cover was increased to 1.0mm from 0.7mm and 1 paper of masking tape was pasted in the upper region of the disk cover. Then the cover endured the heated air formed by braking friction during the driving test.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.11-18
• /
• 2017

In this study, a non-halogen type organic-inorganic hybrid flame retardant sol, which can impart flame resistance to synthesize silicate of inorganic material and silane coupling agent of organic material by a sol-gel method, were newly manufactured. The addition of flame retardant will prevent loss of life in a fire because smoke from the flammability of interior finishing materials used as the construction materials poses a major danger. The smoke density measurement standard based on flame retardant performance standards, experiments were conducted according to the test equipment and procedures of ASTM E 662. The non-flaming mode experiment and the flaming mode experiment were conducted to confirm the performance of the manufactured flame retardant sol. As a result, the manufactured flame retardant sol improved the physical properties and heat resistance of existing flame retardants, and decreased the smoke production of the fire. Therefore, it may be possible to reduce the damage caused by smoke and expand the applications to various interior finishing materials.

• Journal of the Korea Convergence Society
• /
• v.11 no.4
• /
• pp.151-156
• /
• 2020

The purpose of this study is to design a process for developing wearable sports helmet devices by utilizing IoT server technology, focusing on sports where helmet wear is essential at sports sites. This enables customized training of athletes by continuously accumulating personal biometric information during training, checking players' condition based on data, and informing them of injury prevention and dangerous situations. In addition, the wearable device that can be useful when the training place is likely to damage the physical health due to heat waves or extremes can provide a foundation for improving the performance. Since such technology can be applied not only to the sports field but also to the society such as the industrial field or the underprivileged, it can be expected to be expandable.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.423-423
• /
• 2009

Currently, lasers are one of the most popular light sources in use for medical treatment. Many studies on low power lasers are being done in cell culture or through animal tests and most report different findings, making it difficult to verify their true effects. There are shifts in trends of studies from laser and LED that are expensive and generate heat problem to LED that are economically effective and safe. Its near infrared rays can penetrate deep into skin or muscle, up to 23 cm, without causing thermal damage or impairing neighboring tissues. This study verified the performance and effectiveness of an LED irradiator that was designed to emit similar wavelengths to that of a laser and thus could be used instead of a low level laser therapy in experiments on animals. And then, each experiment was performed to irradiation group and non-irradiation group for NTacSam:SD tissue cells. MIT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590nm transmittance of ELISA reader. As a result, the cell increase of NTacSam:SD tissue cells was verified in irradiation group as compared to non-irradiation group. The fact that specific wavelength irradiation has an effect on cell vitality and proliferation is known through this study.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.1
• /
• pp.227-237
• /
• 1998

In case the systems have radioactivity, toxic liquid or expensive fluid, and have to be performed repair work at one point of the system pipe, the formation of an internal ice plug by the removal of heat from the pipe is often consideredas a useful method. In this procedure, an annular jacket is placed around the pipe, and the jacket is then filled with liquid Nitrogen(-196.deg. C). Thermal analysis by the finite element method based on the laboratory experiments has been constructed. The result of the finite element analysis on the experimental model shows to be reasonable, and thus the finite element analysis for different pipe size, material and thickness has been performed to see if the ice plugging procedure in various applications can be safely performed without possibility of damage to the pipe. It has been confirmed that in carbon steel pipes the maximum stress is found around the boundary of the freezing jacket, and the stress increases as pipe thickness increases, but the maximum stress shows no consistency along the increment of the pipe diameter. The maximum stresses appear lower than yield stress in carbon steel. It has been also shown that in stainless steel pipes the maximum stresses are also found around the boundary of the freezing jacket, but almost the same value in spite of different pipe size an thickness, and the maximum stresses show slightly higher than the yield stress of the stainless steel.

• Journal of the Korea Convergence Society
• /
• v.6 no.3
• /
• pp.13-18
• /
• 2015

This paper is the study on the safe design of joint controling the pressure and temperature by connecting between pipes laying with the flexible joint. This study aims at decreasing the excessive pressure applied in the pipe and preventing the accident occurrence in order to solve the pipe damage by extraction and contraction due to the pressure of open air and transport gas. The flow properties of each model are investigated through the simulation analysis by applying three kinds of the flexible joints. When transport gas passes the flexible joint, the flow characteristics of heat, pressure and velocity at pipe laying are analyzed. It is thought to be contributed to the safe design due to the shape of the flexible joint by using the result of this study. And it is possible to be grafted onto the convergence technique at design and show the esthetic sense.

• Culinary science and hospitality research
• /
• v.18 no.2
• /
• pp.162-171
• /
• 2012

This study was conducted to investigate the changes of macerating properties from grape suspensions for which both were treated with protopectinase(PPase) and mechanical maceration stored at $4^{\circ}C$ for 28 days. Changes of macerating properties such as pH, total acidity, color, total polyphenol and antioxidant activity of suspensions after enzymatic hydrolysis were determined before and after heating, and microscopic observation made on suspensions containing single cells. With the PPase, grapes were enzymatically macerated to separate cells to primary cell wall without damage. Also, the changes of macerating properties in grape suspension treated with PPase and after heat treatment at $80^{\circ}C$ for 30 min were more stable than those of mechanical maceration, indicating the thermal stability. Thus, the PPase treatment for grapes could be a better choice for preparing highly valuable and functional processed food as well as for prolonging preservation periods.