• Proceedings of the KWS Conference
• /
• 2003.11a
• /
• pp.117-119
• /
• 2003

When material properties depend much on positions in a material or it is difficult to make test specimens from a material or component, an instrumented indentation test described in ISO 14577-1, 14577-2 or KS B 0950 can be used to measure material properties and damage. In this study, first of all, the principals of the instrumented indentation test, KS B 0950 are introduced and yield strengths, tensile strengths and work hardening exponents of base materials, heat affected zones and weld materials are measured. In addition, the influence of post-weld heat treatment on the material properties are investigated.

• The Journal of Korean Physical Therapy
• /
• v.12 no.1
• /
• pp.147-151
• /
• 2000

Heat shock protein 70(HSP70) is induced by elevated temperature and many other types of stresses in cell. HSP70 ensures cell survival under stressful condition that would lead to irreversible cell damage and ultimately to cell death. HSP70 plays essential role in the synthesis, transport, and folding of proteins and is often refferred to as molecular chaperones. Increased levels of HSPs occur after arthritis, infection, imflammation, autoimmune disease and CNS injury such as infarction, ischemia, seizure and Alzheimer's disease. Also, HSP70 increases resistance to apoptosis. The recent studies that the expression of the HSP has been processed at various field. However, they an still relatively line studied in clinically application. This review summarizes the fundamental knowledge of HSP.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.255-258
• /
• 2005

In this study, the effect of heat treatment conditions and deformation temperature on the formability were investigated in warm hydroforming of Al 6061 tube. Full annealing and T6-treatment for heattreatment of Al6061 tube were used in this study. To evaluate the hydroformability, uniaxial tensile test and bulge test were performed between room temperature and $300^{\circ}C$. And measured flow stress was used to simulate the hydroforming of Al 6061. A commercial FEM code, DEFORM2D, was used to calculate the damage and strain variation. The calculated values were efficient to predict the forming limit in hydroforming for real complex shaped part.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.1
• /
• pp.3-9
• /
• 2011

Plasma nitriding of stainless steels has been investigated over a range of temperature from 400 to $500^{\circ}C$ and time from 10 to 20 hours. Characterization of systematic materials was carried out in terms of mechanical properties and corrosion behaviors. The results showed that plasma nitriding conducted at low temperatures not only increased the surface hardness, but also improved the corrosion resistance of STS 316L, STS409L, and STS 420J2. It was found that plasma-nitriding treatment at $500^{\circ}C$ resulted in increasing the corrosion performance of STS 409L and STS 420J2, while STS 316L was observed with server and massive damage on surface due to the formation of CrN.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.289-292
• /
• 2007

To prevent the damage of glass lens molds and deterioration of glass lenses using in progressive GMP process, a thermal stress and a deformation of the glass lens molds at forming temperature should be considered in the design step. In this study, as a fundamental study to develop a multi cavity mold used in an aspheric glass lens molding, a heat transfer and a thermal stress analysis were carried out for the case of one cavity glass lens mold used in progressive GMP process. Finally, using analysis results, we estimated the thermal stress in a glass lens mold and predicted a modified height of guide ring that determines the forming height of a glass lens.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.1
• /
• pp.105-109
• /
• 2014

Converter valve cooling device as the heat exchanger, is known as the converter valve's blood circulation system, Inefficiency of the equipment will not only lead to the component overheating damage, but also serious DC system outage. Therefore, reliable HVDC valve cooling system is essential for the HVDC transmission system. In this article, analysis on the two-phase flow heat transfer characteristics and security of the evaporative cooling technology are provided, the technology's advantage and feasibility are discussed.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.668-673
• /
• 2003

A wheel and axle failure can cause a derailment with its attendant loss of life and property. The service conditions of railway vehicles have become severe in recent years due to a general increase in operating speeds. Damages of railway wheel are a spalling by wheel/rail contact and thermal crack by braking heat etc. One of the main source of damage is a residual stress. therefore it is important to evaluate exactly. A Residual stress of wheel is formed at the process of heat treatment when manufacturing. it is changed by contact stress developed by wheel/rail contact. Distributions of residual stress vary according to a magnitude of wheel load, a magnitude of friction when acceleration and deceleration. The objective of this paper is to estimate the influence of wheel motion on the residual stress distribution in the vicinity of the running surface.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.303-309
• /
• 2013

For air-tight modern buildings, secondary damage is likely to occur due to condensation in the relatively high heat-transmission windows since water vapor is not easy to discharge. Therefore, in this study, condensation performance of vacuum glazing was numerically analysed, compared with that of ordinary glass and confirmed experimentally by three sheets of vacuum glazing manufactured. The results show that the heat transmission coefficient of the vacuum glazing whose internal pressure is $10^{-3}$ torr was as low as about $5.7W/m^2{\cdot}K$. Thus, the condensation performance as well as the adiabatic performance was greatly improved compared to that of the ordinary glass.

• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.6-10
• /
• 2013

The Heat Recovery Steam Generator(HRSG) is a device recycling the exhaust gas of gas turbine in combined power and chemical plants. Since service temperatures was very high, the damage of HRSG tubes intensively occurred in superheater and reheater. The aim of this paper is to determine life and hardness relationship that addresses creep-rupture test and creep-interrupt test in modified 9Cr-1Mo steel. The measured life that consists of function of hardness was found to constant tendency.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.12 no.1
• /
• pp.295-312
• /
• 1999

A literature study on the nasal stuffiness, the results are as follows. 1. The pathogenic factors nasal stuffiness are wind-cold, cold, fire-heat, heart & lung disease, deficiency of lung-energy and spleen & stomach disease caused by internal damage. 2. The method on the external treatment of nasal stuffiness are obstructive method, blowing method and pouring method, obstructive method used many. 3. The method on the internal treatment of nasal stuffiness are diaphoretic therapy, clearing away heat & toxic materials and warming the lung & invigorating the spleen. 4. You-taek-tong-gue-tang is used in nasal stuffness. 5. Herba Asari, Radix Angelicae Dahuricae, Flos Magnaliae, Fructus Xanthii, Rhizama Acori Graminei, Herba Menthae, Zanthoxyli Fructus and Spina Gleditsiae are used in nasal stuffness.