• Nuclear Engineering and Technology
• /
• v.38 no.6
• /
• pp.535-550
• /
• 2006

The objectives of this paper are twofold to summarize the new findings and confirmed results from the Phebus FPT-1 experimental data and to report useful information to MELCOR users regarding the better use of MELCOR. For the core damage behavior, the early stage of a melt progression was predicted well; however, the late phase models, concerned with fuel dissolution, oxide cladding failure, fuel slumping, rubble debris heat up, effects of burn-up fuel, and so on, still showed limitations in MELCOR. For the fission product behavior, the comparison showed unexpected phenomena, various limitations, unresolved issues, and even absence of models. The issues summarized in this study have revealed the main areas where our endeavors need to be intensified in order to improve our understanding of severe accident phenomena. From the analysis of the Phebus FPT-1 test results, not only new core damage features, such as foaming or core expansion, but also possible new fission product release patterns due to effects from a high burn-up fuel have raised alternative challenging phenomena that should be solved in the next severe accident research phase.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.13-19
• /
• 2017

In this paper, study of vehicle fire cases caused by connector and power wiring of anti-lock brake system(ABS) module damage is presented. The purpose of ABS module is to improve braking and steering ability under sudden stop of the vehicle by repeatedly activating and releasing the brake with electric signal via electric control unit. The electric control unit for ABS may experience incomplete contact between power line and signal line or electrical breakdown on the printed circuit board by undergoing repetitive signal change which would consequently result in electrical heat and spark, eventually leading to automotive fire. Therefore, the purpose of this paper is to provide fundamental data by analyzing connector and power wiring of ABS module damage conducive to the precise investigation on the cause of vehicle fire.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.616-621
• /
• 2003

Fluid-elastic instability is believed to be a cause of the large-amplitude vibration and resulting rapid wear of heat exchanger tubes when the flow velocity exceeds a critical value. For sub-critical flow velocities, the random turbulence excitation is the main mechanism to be considered in predicting the long-term wear of steam generator tubes. Since flow-induced interactions of the tubes with tube supports in the sub-critical flow velocity can cause a localized tube wear, tube movement in the clearance between the tube and tube support as well as the normal contact force on the tubes by fluid should be maintained as low as possible. A simplified method is used for predicting fretting-wear damage of the double $90^{\circ}$U-bend tubes. The approach employed is based on the straight single-span tube analytical model proposed by Connors, the linear structural dynamic theory of Appendix N-1300 to ASME Section III and the Archard's equation for adhesive wear. Results from the presented method show a similar trend compared with the field data. This method can be utilized to predict the fretting-wear of the double $90^{\circ}$U-bend tubes in steam generators.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.13-14
• /
• 2016

This study is aimed to analyze temperature history at each section of mat foundation concrete applying double bubble sheets. The results of the study are as follows. Firstly, the results of measuring the temperature history indicate that the lowest external temperature has been recorded at -5.6℃ for the three-day measurement period. For the central section, the result indicates that the lower, center and upper part have all secured the concrete curing temperature of 18℃ or higher. This results are believed to have resulted from excellent heat insulation performance of double bubble sheets. For the edge section between the edge form and the concrete interface, the temperature has been measured, on average, approximately 12℃ lower than the central section. However, all measured sections have indicated the temperature of 5℃ or higher. Meanwhile, an analysis has been conducted through the estimation equation of compressive strength of maturity during the curing period in order to examine the possibility of early frost damage and the aspect of securing strength. It has been confirmed that the compressive strength is higher than 50°D·D, namely, 5MPa, on the 3rd day of the aging process, which allows early frost damage to be avoided.

• Journal of Power System Engineering
• /
• v.15 no.5
• /
• pp.22-29
• /
• 2011

In this study, the damage mechanism of large scale steam turbine due to water induction was analyzed and recovery characteristics were reviewed. A turbine consists of the rotating rotor and the stationary casing, and the clearance between them is very small for the efficiency enhancement. If water induction, while relatively cold steam or water is introduced into turbine, occurs, the considerable humping is caused at the casing near the initial water induction point and that induces the rubbing between rotor and casing. Finally, it leads to the catastrophic failure. Bowed rotor has the different characteristics in the recovery depending on damage degree. The elastic deformation due to light rubbing is recovered by turning the rotor with 3 rpm under normal operation condition, but most plastic deformation due to rubbing deforms the local microstructure and that results in permanent deformation which could not be recovered under normal operation condition. Bowed rotor has diverse characteristics depending on the recovery method, and the method is empirical and needs the cutting edge technology. Careful recovery treatment of the rotor will eliminate the risks and secure the high quality rotor similar to new rotor. If any critical error is made during the recovery, the rotor would not be recovered permanently and it should be scrapped.

• Transactions of Materials Processing
• /
• v.23 no.3
• /
• pp.164-170
• /
• 2014

To predict the deformation and fracture during tube expansion using the finite element (FE) method, a material model is considered that incorporates the damage evolution due to the deformation. In the current study, a Rice-Tracey model was used as the damage model with inclusion of the hydrostatic stress term. Since OFHC Cu is not significantly affected by strain rate, a Hollomon flow stress model was used. The material parameters in each model were obtained by using an optimization method. The objective function was defined as the difference between the experimental measurements and FE simulation results. The parameters were determined by minimizing the objective function. To verify the validity of the FE modeling, cross-verification was conducted through a tube expansion test. The simulation results show reasonable agreement with the experiments. The design for a minimum diameter of expansion tube using the FE modeling was verified by a simplified tube expansion test and simulation results.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.8
• /
• pp.37-43
• /
• 2019

The existing smart farm technology has been systematized for the mass production rather than the consumer. There are many problems such as economical aspect to apply to actual rural environment due to aging. The purpose of this study is to apply smart farm technology based on the applicability of population aged in rural areas. Due to the heat wave, the crops in general greenhouse cultivation facilities suffered from damage such as sunlight damage. To minimize such damage, adjust the temperature and humidity environment or install a light-shielding film. However, the workers in the rural areas are aging and the elderly who are farming alone have a lot of difficulties in doing so. In the case of people with weak physical strength, there is a danger that they may lead to safety accidents when carrying heavy loads. In this paper, we propose 'Smart Palm capable of automatic transportation function', applying small smart vehicles that follow workers to existing smart farms to improve and prevent these problems. It is a smart farm that performs the control functions of the existing smart greenhouse environment, installs the rail for each trough, and has a vehicle that follows the worker. The smart app can directly control the greenhouse and the vehicle remotely manually.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.33 no.12
• /
• pp.3-10
• /
• 2017

Climate change not only has various impacts such as human shoes, economics, the environment, industry, etc. but the damage caused by this is also increasing, it is expected that severe damage will not occur without efforts to respond to climate change ing. Therefore, as the impact of climate change like the extreme weather phenomenon is dailyized and its strength tends to become stronger, as much as the mitigation measures of climate change, as a comparative effort to reduce the negative impact of climate change, adaptation to climate change is necessary. Especially when the damage caused by climate change (intense heat, torrential rain, cold wave and heavy snow etc.) as an institution responsible for the provision of public services such as public institutions, the socio-economic spread to the nation and the people The effect is very large. We confirmed the level of response to climate change for the entire public institution, and selected climate change risk which is relatively important for specific facilities and business establishments of public institutions, climate change adaptation measures We will try to utilize it as basic material of establishment.

• Journal of Korean Medical classics
• /
• v.36 no.2
• /
• pp.77-96
• /
• 2023

Objectives : The purpose and application method of the five kinds of Gagamjeong-gisan in the Onbyeongjobyeon were analyzed and their significance was examined. Methods : First, contents within medical texts on the Gwakhyangjeong-gisan, the original formula for the Gagamjeong-gisan were analyzed. Next, application, symptoms and pathogenic mechanism, treatment principle, composition of the Gagamjeong-gisan as written in the Onbyeongjobyeon were analyzed. Characteristics of each formula as deduced from this process were compared and examined. Results : The Gwakhyangjeong-gisan covers both external contraction and internal damage, applied regardless of external or internal symptoms. It restores the Yang qi of the Spleen and Stomach, balancing the Zheng qi to respond to the external qi. The Gagamjeong-gisan takes after the Gwakhyangjeong-gisan, reflecting such properties. However, the latter differs in that it excludes ingredients unfit for treating dampness-warmth, and uses different application methods according to the level of discharge of dampness pathogen. Conclusions : The Gagamjeong-gisan is modified from the Gwakhyangjeong-gisan, which is applied to cold damage and internal damage to better treat warm disease. It can be said to have acted as a bridge for warm disease scholars in composing formulas that deal with dampness-heat disease.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.1-8
• /
• 2024

In this study, the influence of thermal aging on structural integrity is investigated for Gr. 91 steel. A commercial grade Gr. 91 steel is used for the virgin material, and service-exposed Gr. 91 steel is sampled from a steam pipe of a super critical plant. Time versus creep strain curves are obtained through creep tests with various stress levels at 600 ℃ for the virgin and service-exposed Gr. 91 steels, respectively. Based on the creep test results, the improved Omega model is characterized for describing the total creep strain curve for both Gr. 91 steels. The proposed parameters for creep deformation model are used for predicting the steady-state creep strain rate, creep rupture curve, and stress relaxation. Creep-fatigue damage is evaluated for the intermediate heat exchanger (IHX) in a large-scale sodium test facility of STELLA-2 by using creep deformation model with proposed creep parameters and creep rupture curve for both Gr. 91 steels. Based on the comparison results of creep fatigue damage for the virgin and service-exposed Gr. 91 steels, the thermal aging effect has been shown to be significant.