• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.4
• /
• pp.313-327
• /
• 2008

Thermo-mechanical coupled behavior of an underground structure during a fire accident have not been fully understood yet. Moreover, when such a thermo-mechanical coupled behavior is not considered in numerical analyses based on conventional heat transfer theory, fire-induced damage zone in an underground structure can be considerably underestimated. This study aims to develop a FEM-based numerical technique to simulate the thermo-mechanical coupled behavior of an underground structure in a fire accident. Especially, an element elimination model is newly proposed to simulate fire-induced structural loss together with a convective boundary condition. In the proposed model, an element where the maximum temperature calculated from heat transfer analysis is over a prescribed critical temperature is eliminated. Then, the proposed numerical technique is verified by comparing numerical results with experimental results from real fire model tests. From a series of parametric studies, the key parameters such as critical temperature, element size and temperature-dependent convection coefficients are optimized for the RABT and the RWS fire scenarios.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.401-406
• /
• 1998

For the applications in optical waveguides and devices, LiNbO_3$ single crystals need to overcome the weakness of optical damage due to the inhomogeneities of laser-induced refractive index. This problem can be solved by doping of Mg in LiNbO_3$ and proton exchange of LiNbO_3$. In this study, to understand the mechanism of optical damage resistance in LiNbO_3$, the changes of lattice defects in LiNbO_3$ caused by MgO doping and acid treatment were observed indirectly by $OH^-$ absorption bands using a FT-IR spectrophotometer. The effect of lattice defects on temperature, heat-treatment and polishing were also investigated. It is shown that MgO doping increases optical damage resistance by generating the defects of $Mg_{Nb}^{2+}$ in the lattice of LiNbO_3$, and that proton exchange by implantation of $H^+$ ion in the hexagonally closest packed oxygen layers on the surface of LiNbO_3$, makes lattice defects, which diffuse into the crystal after heat-treatment above $400^{\circ}C$.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 1997.12a
• /
• pp.101-101
• /
• 1997

Comet assay, single cell gel electrophoresis has been known as useful, rapid, simple, visual, and sensitive technique for measuring the DNA breakage in mammalian ce1ls. For evaluation of DNA damage using comet assay, early studies reported a change in comet length and intensity with DNA damage using simple visual technique, such as fluorescence microscopy with eyespiece. In recent, some workers are observing and analyzing nucleotide of comets using quantitative fluorescence image analysis system to estimate 'tail moment', which is defined as the product of the tail length and the fraction of total DNA in tail. Our laboratory also adopted the image analysis software for qualification. In addition, many of the practical features of comet assay render it potentially attractive as useful tool for molecular toxicology and carcinogenesis, because the system is already showing considerable promise as rapid predictor in both in vitro and in vivo experimental designs. Recently, the comet assay becomes a attractive technique to study of apoptosis, because apoptotic fragmentation of nuclear DNA into nucleosomal sizes can be evaluated by the comet assay. So, we attempted to apply the comet assay to studying the effect of various stress on the apoptosis-sensitive cell lines. Particularly, focusing on the hyperthermic apoptosis, we could find that heat shock(44˚C for 60 minutes) was sufficient to induced apoptosis in these cell lines. But using the highly sensitive comet assay, we could not detect DNA breaks immediately after heat shock.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.16 no.2
• /
• pp.163-187
• /
• 2010

The concept of latent-gi(伏氣) was first mentioned in Yellow Emperor's Canon of Internal Medicine. For example, Elementary Questions states, "Damage by cold in winter necessarily engenders warm disease in the spring." Zhang Zhong-Jing of Han Dynasty in On Cold Damage and Miscellaneous Diseases mentions warm disease, stating, for example, "Greater yang disease with heat effusion and cough and without aversion to cold is warm disease. If sweating is applied, and there is generalized heat, this is wind warmth." However, the concept of warm disease was not central to his systematic presentation of externally contracted disease which placed the emphasis on wind and cold as the major causes of these diseases. Zhang Zhong-Jing's theories centuries after in the Sung Dynasty were to become the focus of the cold damage school, whereas the concept of warm disease was to become the focus of a rival school, the warm disease school. In the Sui-Tang Period, The Origin and Indications of Disease mentions warm diseases, their causes, patterns, and major principles of treatment. Successive generations of doctors wrote about warm disease, and in the Ming Dynasty writings on the subject become more prolific. This development is attributable on the one hand to the opening up of the south of China where febrile diseases tended to be of a different nature than in the north, and on the other to pestilences arising as a result of wars. In this period, Wu You-Xing in On Warm Epidemics explained in detail the laws governing the origin, development and pattern identification of warm epidemics. Notably, he posed the etiological notion of a contagious perverse gi.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.31 no.5
• /
• pp.255-263
• /
• 2017

This article is for understanding relations between the classifications of gastritis and syndrome differentiation types of Korean Medicine through research on syndrome differentiations of clinically applied gastritis and literature of Korean Medicine. Clinical papers were searched in China Academic Journals(CAJ) of China National Knowledge Infrastructure(CNKI) from 1995 to 2015. Conclusions are as follows. First, disease mechanism of chronic gastritis are qi stagnation, damp stagnation, heat obstruction, blood stasis obstruction, yin damage, damage to collaterals with healthy qi deficiency and pathogenic qi. And qi movement stagnation is shown through the status of chronic gastritis. Second, chronic superficial gastritis belongs to qi aspect syndrome and mainly pathogen excess syndrome. And the key mechanisms are congestion and disharmony of stomach qi sometimes combined with liver depression, food accumulation and dampness-heat. Third, chronic atrophic gastritis belongs to qi-blood syndrome and deficiency-excess complex syndrome with the root of spleen qi deficiency and stomach yin deficiency and the tip of blood stasis, qi stagnation. And key mechanism is damage to collaterals with healthy qi deficiency and toxin-blood stasis. Forth, pathogen excess syndromes are shown at the early stage of chronic gastritis and healthy qi deficiency syndromes after the middle stage. Qi deficiency is shown at the beginning of the disease and yin deficiency at the late stage. And qi deficiency is related with superficial gastritis and yin deficiency with atrophic gastritis.

• Corrosion Science and Technology
• /
• v.22 no.6
• /
• pp.435-446
• /
• 2023

Corrosion behaviors of laser-welded super duplex stainless steel (SDSS) tubes after exposure to an actual power plant environment for one year and those of fin-tube welded SDSS were evaluated. Results showed that corrosion damage on the back side of the SDSS tube in the direction of hot air was higher than that on the front side regardless of weldment location. However, corrosion damage showed no difference between weldment and base metal due to recovery of phase fraction in the weldment through post weld heat treatment (PWHT). Nevertheless, the SDSS tube showed severe corrosion damage along grain boundary due to surface phase transformation (δ → γ) and Cr₂N precipitation caused by PWHT with a high N₂ atmosphere. Corrosion resistance of the SDSS tube was recovered when degraded surface was removed. Corrosion sensitivity of a fin-tube increased significantly due to pre-existing crevice, unbalanced phase fraction, and σ phase precipitation adjacent to the fusion line. Although corrosion resistance was improved by recovered phase fraction and sufficient dissolution of σ phase during PWHT, corrosion reaction was concentrated at the pre-existing crevice. These results suggest that welding conditions for fin-tube steel should be optimized to improve corrosion resistance by removing pre-existing crevice in the weldment.

• Journal of Life Science
• /
• v.11 no.5
• /
• pp.464-469
• /
• 2001

A gene, dnaK2, encoding a distinct member of the HSP70 family of molecular chaperones is isolated from the halotolerant cyanobactrium Aphanothece halophytica. The dnak2 gene encodes a molecular wight of 68 kDa polypeptide with predicted 616 amino acid residues. The DnaK2 protein has a structural characteristic of bacterial DnaK homologues and shows high similarity to other HSP70/Dank proteins. The danK2 transcripts are hardly detectable at 28$^{\circ}C$ and strongly induced upon heat stress. It is also found that dnaK2 transcript is increased by high-salinity stress even in the absence of heat stress. These results suggest that the DnaK2 protein plays an important role in protecting A. halophytica against damage caused by salt stress at well as heat stress.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.12
• /
• pp.61-67
• /
• 2023

Heat pipes located underground in urban areas and operated under high temperature and pressure conditions can cause large-scale human and economic damage if damaged. In order to predict damage in advance, damage and construction information of heat pipe are analyzed to derive independent variables that have a correlation with frequency of damage, and a simple regression analysis modified model using each variable is applied to the field. However, as the correlation between independent variables applied to the model increases, the independence between variables is harmed and the reliability of the model decreases. In this study, the independence of the pipe diameter, burial depth, insulation level of monitoring system, and disconnection or short circuit of the detection line, which are judged to be interrelated, was tested to derive a method for combining variables and setting categories necessary to apply to the frequency of damage estimation model. For the test of independence, the continuous variables pipe diameter and burial depth were each converted into three categories, insulation level of monitoring system was converted into two categories, and the categorical variable disconnection or short circuit of the detection line status was kept as two categories. As a result of the test of independence, p-value between pipe diameter and burial depth, level of monitoring system and disconnection or short circuit of the detection line was lower than the significance level (α = 0.05), indicating a large correlation between them. Therefore, the pipe diameter and burial depth were combined into one variable, and the categories of the combined variable were set to 9 considering the previously set categories. The insulation level of monitoring system and the disconnection or short circuit of the detection line were also combined into one variable. Since the insulation level is unreliable when the detection line status is disconnection or short circuit, the categories of the combined variable were set to 3.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.1
• /
• pp.27-33
• /
• 2003

Excessive heat generation at the implant-bone interface may cause irreversible bone damage and loss of osseointegration. The effect of heat generation in vitro at the implant surface caused by abutment reduction with high-speed dental turbine was examined. Titanium-alloy abutments connected to a titanium alloy screw-implant embedded in an acrylic-resin block in a $37^{\circ}C$ water bath were prepared. Temperature changes were recorded via embedded thermocouples at the cervix and apex of the implant surface. Analysis of variance for repeated measures was used to compare seven treatment groups. Fifty seconds of continuous cutting with air and water coolant caused a mean temperature increase of $1.24^{\circ}C$ at apex and $5.77^{\circ}C$ at cervix. Similar intermittent cutting caused increase of $2.50^{\circ}C$ at apex and $1.64^{\circ}C$ at cervix. But, continuous cutting with air coolant caused a mean temperature increase of $6.47^{\circ}C$ at apex and $5.77^{\circ}C$ at cervix. Similar intermittent cutting caused increase of $6.47^{\circ}C$ at apex and $5.77^{\circ}C$ at cervix. Preparation of implant abutment does not lead to detrimental effect on peri-implant tissues provided that adequate cooling. However, without water cooling, extreme overheating could be provoked, reaching the critical temperature that would lead to irreversible bone damage within only a few seconds.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.6
• /
• pp.893-900
• /
• 2008

The heat exchangers in the ships have been changed from the conventional shell & tube type to the plate type due to some merits as a compactness, a high thermal efficiency and a light-weight. In recent. it is reported that the vacuum phenomena were occurred in the seawater outlet piping of a main central cooler (MCC) on the ships. From the viewpoints of a common sense, the vacuum pressure in the seawater piping is rare event and difficult to be convinced because the seawater is pumped into the piping by a seawater pump with a high discharge head. However, the occurrence of a vacuum pressure in the seawater line of an MCC is real situation and often gives a severe damage to a rubber gasket of an MCC with a plate type heat transfer area. In this study, we analyzed the vacuum pressure in the seawater line of an MCC by using the simpl Bernoulli's equation and found that the vacuum pressure in the seawater line of an MCC is inevitable untill the installation postion of an MCC is not lowered.