• Applied Biological Chemistry
• /
• 제12권
• /
• pp.7-11
• /
• 1969

Mucor-rennin, the crystalline milk-clotting enzyme, isolated from Mucor pusillus var. Lindt, has an acid protease activity. The optimum pH for the digestion of k-casein is 4.5, while that for hemoglobin digestion is 4.0. The skim milk solution was easily clotted acidic solution than alkalin solution, and the milk clotting activated by Ca ion. The enzyme was heat stable against heat from pH 4.0 to 6.0 but was more stable at pH 5.0. The activity of the enzyme at pH 5.0 did not decrease at 30 C for 15 days and the activity was not effected by sodium propionate and salicilic acid. Therefore, the enzyme of liguid type could store for a long time and could be transported from Erzyme production Co. to Manufacture of cheese Co. by adding the antiesptic and by adjusting pH to 5.0.

• 한국식품위생안전성학회지
• /
• 제10권4호
• /
• pp.263-270
• /
• 1995

In order to promote the prevention of microbial and enzymatic spoilage and to retain the freshiness, sweet persimmons harvested in Gyeongsangnam-do were treated with graperfruit seed extract(GFSE)-CaCO3 mixture and stored in the proper packaging conditions. A low concentration of GFSE showed effective growth inhibition of plant pathological bacteria and fungi, Enterobacter pyrinus and Fusarium sp., which were involved in the decay of fruits and vegetables. GFSE was stable to heat treatment; its antimicrobial activity was not changed by heat treatment upto 10$0^{\circ}C$. However, when the temperature was raised to 12$0^{\circ}C$, about 90% of total activity was retained within 30 min. GFSE was also highly stable to broad pH changes; its activity was not changed in the range of pH 2.0 to pH 12.0. The physiological function of cell membrane in the spores of Bacillus cereus and the hyphae of Fusarium sp. was destroyed by treating with GFSE. It was observed that treating sweet persimmons with GFSE minxture and storing them in strech-wrapped packages could prolong the greshness of sweet persimmons and reduce quality deterioration.

• 한국재료학회지
• /
• 제19권8호
• /
• pp.412-416
• /
• 2009

In this study, 3 mol% yttria-tetragonal zirconia polycrystal (3Y-TZP) nanoparticles were synthesized by the glycothermal method under various reaction temperatures and times. The co-precipitated precursor of 3Y-TZP was prepared by adding $NH_4OH$ to starting solutions, and then the mixtures were placed in an autoclave reactor. Tetragonal yttria-doped zirconia nanoparticles were afforded through a glycothermal reaction at a temperature as low as $220^{\circ}C$, using co-precipitated gels of $ZrCl_4$ and $YCl_3{\cdot}6H_2O$ as precursors and 1,4-butanediol as the solvent. The synthesized 3Y-TZP particles were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and Raman spectroscopy. The 3Y-TZP particles have a stable tetragonal phase only at glycothermal temperatures above $200^{\circ}C$. To investigate phase transition, the 3Y-TZP particles were heat treated from 400 to $1400^{\circ}C$ for 2 h. Raman analysis indicated that, after heat treatment, the tetragonal phase of the 3Y-TZP particles remained stable. The results of this study, therefore, suggest that 3Y-TZP powders can be prepared by the glycothermal method.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• 제1권1호
• /
• pp.68-73
• /
• 2020

Korean fir (Abies koreana) is an evergreen coniferous tree species that is unique to South Korea. A. koreana is found in a limited sub-alpine habitat and is considered particularly vulnerable to climate change. Identification of populations vulnerable to climate change is an important component of conservation programs. In this study, a heat stress-induced transcriptome RNA-seq dataset was used to identify a subset of six genes for assessment as candidate marker genes for ecologically vulnerable populations. Samples of A. koreana were isolated from ecologically stable and vulnerable regions of the Halla and Jiri mountains, and the expression levels of the six candidate markers were assessed using quantitative real-time polymerase chain reaction. All six of the candidate genes exhibited higher expression levels in samples from vulnerable regions compared with stable regions. These results confirm that the six high temperature-induced genes can be used as diagnostic markers for the identification of populations of A. koreana that are experiencing stress due to the effects of climate change.

• Nuclear Engineering and Technology
• /
• 제29권1호
• /
• pp.45-57
• /
• 1997

The direct contact condensation phenomenon, which occurs when steam is injected into the subcooled water, has been experimentally investigated. Two plume shapes in the stable condensation regime are found to be conical and ellipsoidal shapes depending on the steam mass flux and the liquid subcooling. Divergent plumes, however, are found when the subcooling is relatively small. The measured expansion ratio of the maximum plume diameter to the injector inner diameter ranges from 1.0 to 2.3. By means of fitting a large amount of measured data, an empirical correlation is obtained to predict the steam plume length as a function of a dimensionless steam mass flux and a driving potential for the condensation process. The average heat transfer coefficient of direct contact condensation has been found to be in the range 1.0~3.5 ㎿/$m^2$.$^{\circ}C$. Present results show that the magnitude of the average condensation heat transfer coefficient depends mainly on the steam mass fin By using dynamic pressure measurements and visual observations, six regimes of direct contact condensation have been identified on a condensation regime map, which are chugging, transition region from chugging to condensation oscillation, condensation oscillation, bubbling condensation oscillation, stable condensation, and interfacial oscillation condensation. The regime boundaries are quite clearly distinguishable except the boundaries of bubbling condensation oscillation and interfacial oscillation condensation.

• 열처리공학회지
• /
• 제6권3호
• /
• pp.138-143
• /
• 1993

Effects of aging treatment on the microstructural evolution of a rapidly solidified Al-Li-Cu alloy were investigated by differential scanning calorimetry (DSC) and transmission electron microscopy(TEM). It was found that the precipitation sequence was: supersaturated solid solution ${\alpha}^{\prime}$ ${\rightarrow}$ metastable ${\delta}^{\prime}$ + stable precipitate $T_1$ ${\rightarrow}$ stable precipitates ${\delta}+T_1$. Two exothermic and two endothermic peaks are detected by DSC analysis. The two exothermic and endothermic peaks corresponded to ${\delta}^{\prime}$ and ${\delta}+T_1$ precipitation and dissolution reactions respectively. The enthalpy of ${\delta}^{\prime}$ precipitation decreased with increasing of aging temperature and time until the finishing point of precipitation. The activation energy for precipitation of ${\delta}^{\prime}$ was measured as 80KJ/mol and the energy for dissolution was 93KJ/mol. These values arc higher than those of AI-Li binary alloy. Peak hardness value (Hv 170) was obtamed at $210^{\circ}C$ for 1hr aging treatment which coincided with finishing point of ${\delta}^{\prime}$ precipitation.

• 열처리공학회지
• /
• 제34권6호
• /
• pp.265-271
• /
• 2021

In this study, anti-tarnishing and corrosion characteristics of a single 𝛽1' and Bangjja Yugi alloy in the Cl^- ion environment before and after potentiostatic electrolysis treatment were compared. Stable and uniform SnO₂ oxide film with several nanometer thickness is formed after potentiostatic electrolysis treatment. In the case of Bangjja Yugi prior to potentiostatic electrolysis (PE) treatment for exposure in Cl^- environment, tarnishing occurs rapidly within 0.5hr, whereas PE treated Bangjja Yugi indicates stable surface without tarnishing up to 3hr. Especially, it is noticeable that anti-tarnishing and corrosion characteristic of PE treated single 𝛽1', which were significantly improved by 3 times and 15 times, respectively, compared to conventional Bangja Yugi.

• 한국균학회지
• /
• 제17권3호
• /
• pp.145-148
• /
• 1989

Aspergillus niger K-25가 생산하는 내산성 ${\alpha}-amylase$를 정제하여 특성을 조사하였다. 분자량은 전기영동상에서 약 58,000달톤으로 나타났고, 최적 pH는 4였고, pH3에서 활성을 잃어 버리는 시판효소와 달리 본 효소는 91%의 활성을 유지했다. 최적 온도는 $40^{\circ}C$였으며, $60^{\circ}C$에서도 80%의 활성을 유지하여 열에 대한 안정성도 높은 것으로 나타났다.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.428-432
• /
• 2012

Polyamidimide (PAI)-colloidal silica (CS) nanohybrid films were synthesized by an advanced sol-gel process. The synthesized PAI-CS hybrid films have a uniform and stable chemical bonding and there is no interfacial defects observed by TEM. The thermal degradation ratio of PAI-CS (10 wt%) hybrid films is delayed by 100 ℃ compared with pure PAI sample determined by on set temperature range in TGA. The dielectric constant of PAI-CS (10 wt%) hybrid films decreases with increasing CS content up to about 5 wt% but increases at higher CS content, which is not explained simply by effective medium therories (EMT). The duration time of PAI-CS (10 wt%) hybrid coil is 38 sec, which is very longer than that of pure PAI coil sample. The PAI-CS (10 wt%) hybrid film has a higher breakdown voltage resistance than the pure PAI film at surge environment and exhibits superior heat resistance. The PAI-CS (10 wt%) sample shows the advanced and stable thermal emission properties in transformer module compared with the pure PAI sample. This result illustrates that the advanced thermal conductivity and expansion properties of PAI-CS sample in the case of appropriate sol-gel processes brings the stable thermal emission in transformer system. Therefore, new PAI-CS hybrid samples with such stable thermal emission properties are expected to be used as a high functional coating application in ET, IT and electric power products.

• 설비공학논문집
• /
• 제19권10호
• /
• pp.679-686
• /
• 2007

The cooling load in winter season is significant in many commercial buildings and hotels because of the usage of office equipments and the high efficiency of wall insulation. The development of a multi-heat pump that can cover heating and cooling simultaneously for each indoor unit is required. In this study, a 4-room simultaneous heating and cooling heat pump system was designed and its performance was measured at each operating mode. The system used R-410A and adopted variable speed compressor. The problems on the designed system were analyzed and defined. In addition, the solutions of the problems were suggested to improve system efficiency and to obtain the stable operation.