• 한국가구학회지
• /
• 제20권5호
• /
• pp.490-503
• /
• 2009

The objective of this work was to investigate the mechanism of heat transfer in hot-pressing process for MDF manufacturing by reference study. Firstly, general heat transfer theory was studied. The numerical analysis of heat transfer in hot-pressing process was studied on temperature profile, moisture profile, physical properties between moisture and board. The mechanism of heat and moisture transfer inside of board was analyzed by conduction, convection, radiation and diffusion of bound water in wood cell walls. Especially, the change of core temperature as hot press time was important factor to setup hot-pressing schedule in MDF manufacturing.

• 대한치과보철학회지
• /
• 제38권5호
• /
• pp.575-582
• /
• 2000

This investigation was designed to determine whether heat-pressing and/or simulated heat treatments affected the flexure strength and the microstructure of the lithium disilicate glass-ceramic in the IPS Empress 2 system. Four groups of the specimens were prepared as follows: group 1 - as-received material, group 2 - heat-pressed material; group 3 - heat-pressed and simulated initial heat-treated material; group 4 - heat-pressed and the simulated heat-treated material with full firings for a final restoration. The three-point bending test and the scanning elec-tron microscope (SEM) analysis was conducted for the purpose of this study. The flexure strength of group 2 was significantly higher than that of group 1. However, there were no significant differences in strength among group 2, 3, and 4, and between group 1 and 4. The SEM micrographs of the lithium disilicate glass-ceramic showed the closely packed, multi-directionally interlocking microstructure of numerous lithium disilicate crystals protruding from the glass matrix. The crystals of the heat-pressed materials (group 2, 3, and 4) were a little denser and about two times bigger than those of the as-received material (group 1). This change of microstructure is more obviously exhibited particularly between group 1 and 2. However, there was no a marked difference among group 2, 3, and 4 after the heat-pressing procedure. Although there were significant increase of the strength and some changes of the microstructure after the heat-pressing operation, the combination of the heat-pressing and the simulated subsequent heat treatments did not produce the increase of strength of IPS Empress 2 glass-ceramic.

• 대한치과기공학회지
• /
• 제43권4호
• /
• pp.175-180
• /
• 2021

Purpose: This study investigates the effect of repeated use of lithium disilicate glass-ceramics on color stability. Methods: In this study, 2 types of lithium disilicate glass-ceramics were used and they were divided into 4 groups after 1st, 2nd, 3rd, and 4th heat pressing. The L^*, a^*, and b^* values of all specimens were measured using the VITA Easyshade Advance 4.0. These values was used to determine the ∆E value and transparency. IBM SPSS Statistics ver. 24.0, a statistical significance level of 0.05 and one-way ANOVA were used for all data. Results: In all groups, the L^* and b^* values were the lowest in the specimens subjected to the 4th heat pressing and the corresponding a^* value was the highest. All specimens showed ∆E values of ≤3.3, indicating color changes that were not visible with the naked eye, and the color difference increased with the number of repeated heat pressing. The transparency of all specimens decreased as the number of repeated uses increased. Conclusion: According to the number of repeated heat pressing, the color difference of Rosetta SP (HASSBIO) was larger than that of IPS e.max Press (Ivoclar Vivadent), but it was clinically acceptable in all groups. Moreover, transparency decreased as the number of heat presses increased in all groups. According to the above findings, the lithium disilicate glass-ceramic has high color stability due to repeated heat pressing, implying that it can be used in clinical settings regularly.

• 한국가구학회지
• /
• 제24권1호
• /
• pp.79-87
• /
• 2013

The objective of this study was to increase the utilizability of domestic thinning and small diameter wood as applying in pattern design which can be applied in interior decoration, wood craft and wood furniture, and in developing the designs of furniture and household items. Then we investigated the physical and mechanical characteristics of Acer mono wood by pressurization and heat treatment. Color change is clear, and the wood density is increased with increasing pressing rate. The compressive and bending strengths are decreased as heating time is increased after pressing. However, shrinkage is improved after pressing and heating.

• 한국식품과학회지
• /
• 제54권2호
• /
• pp.179-184
• /
• 2022

본 연구에서는 열 압착 공정을 이용하여 생고분자 가식성 FG 필름과 MG 필름을 제작하였고, 제조 공정 차이에 따른 필름의 형성, 표면 미세구조, 그리고 빛 투과도를 비교하기 위해 캐스팅 방법을 이용해서도 FG 필름을 제작하였다. 열 압착을 이용하여 FG와 MG로부터 연속적이고, 균일하며, 투명하고, 그리고 매끄러운 표면을 가진 필름을 제작할 수 있었다. 열 압착된 FG 필름은 열 압착된 MG 필름보다 빛 투과도와 인장 강도가 낮았으나, 육안 관찰 및 현미경을 이용한 표면 미세구조를 관찰 시 큰 차이를 확인할 수 없었으며, 수분 투과도와 필름의 명도 및 붉은 정도에서도 유의적인 차이가 보이지 않았다. 또한, 열 압착된 FG 필름이 캐스팅된 FG 필름보다 육안으로 보았을 때 더욱 투명하고 균일한 표면을 가진 것을 확인할 수 있었고, 투명도도 캐스팅 된 FG 필름보다 높음을 알 수 있었다. 열 압착된 FG 필름이 캐스팅된 FG 필름보다 낮은 인장 강도와 높은 수분 차단 능력을 갖췄다. 열 압착된 FG 필름은 캐스팅된 FG 필름과 색도의 차이가 있었고, 캐스팅된 FG 필름보다 매끄럽고 균일한 표면 미세구조를 가진 것을 알 수 있었다. 본 연구의 결과는 열 압착 공정을 사용하는 산업적 생고분자 생산 시스템을 사용하여 우수한 수분 차단 능력을 갖춘 가식성 필름을 MG과 생선껍질로부터 얻어지는 FG을 이용해 제작할 수 있음을 보여주었다.

• 구강회복응용과학지
• /
• 제18권2호
• /
• pp.93-99
• /
• 2002

This study was performed to investigate the color stability of IPS Empress 2 glass-ceramic after heat-pressing and/or heat-treatments. Three types of IPS Empress 2 ingots (shade 100, 300, 500) were tested. For this study, three groups were prepared as follows: group 1 is as-received material, group 2 is heat-pressed material, and group 3 is fully heat -treated material. The color of the specimens was measured with a colorimeter. The data were statistically evaluated with one-way ANOVA and Scheffe's multiple test. The results obtained were as follows: 1. IPS Empress 2 glass-ceramic demonstrated less color stability according as the shade is lighter. Namely, the shade 500 showed the lowest color shifts and the shade 100 showed the greatest color shifts after heat-pressing and heat-treatments. 2. In the cases of shade 100 and 300, the changes of ${\Delta}E^*$ were affected mostly by the changes of $L^*$ and $b^*$. 3. In ${\Delta}E^*$ of the shade 100, there were significant differences among the group 1, 2, and 3 (P<0.001). 4. In ${\Delta}E^*$ of the shade 300, there were significant differences between the group 1 and 2, and the group 1 and 3 (P<0.001). 5. In ${\Delta}E^*$ of the shade 500, there was significant difference only between the group 1 and 3 (P<0.001).

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.42-45
• /
• 2007

Recrystallization behavior during ingot-breakdown process of Alloy 718 was investigated with finite element analysis and experimental approaches. In order to analyze microstructural changes during the cogging process of an Alloy 718 ingot, the side-pressing and heat treatment tests were performed at different temperatures and ram speed. From the side-pressing and heat treatment test results, it was found that microstructural changes during hot forging of Alloy 718 ingot greatly influenced on a close interaction between dynamic and static-recrystallization behaviors. A recrystallization model of Alloy 718 was used to predict the complex microstructural variation during continuous heating and forging processes of the cogging, and the predicted grain size and its distribution were compared with the actual cogged Alloy 718 billet.

• Journal of the Korean Wood Science and Technology
• /
• 제15권4호
• /
• pp.45-58
• /
• 1987

우리나라의 대표적(代表的)인 조림수종(造林樹種)의 하나인 현사시나무(Populus alba $\times$ glandulosa)를 공시재(供試村)로 하여 가열(加熟), 가압처리(加壓處理)가 목재(木材)의 물리적(物理的) 기계적(機械的) 성질(性質)에 미치는 영향(影響)을 조사(調査)하여 목질개량(木質改良)을 위(爲)한 기초자료(基礎資料)로 활용(活用)코자 실험(實驗)을 수행(遂行)하였는 바 다음과 같은 결론(結論)을 얻었다. 1) 비중(比重)은 압축율(壓縮率)이 증가(增加)함에 따라 현저(顯著)히 증가(增加)하였다. 2) 수축율(收縮率)은 압축율(壓縮率)이 증가하여 소재(素材)와 비교(比較)하여 경단방향(徑斷方向)은 약(約) 1.5~2배(倍), 촉단방향(觸斷方向)은 약(約)1~2.2배(倍), 섬유방향(纖維方向)은 약(約)1.6~2.1배(倍) 이었다. 3) 흡수율(吸收率)은 압축율(壓縮率) 30%까지는 별(別)로 증가(增加)하지 않았으나 압축율(壓縮率) 40%이상(以上)에서는 소재(素材)에 비(比)해 높은 증가율(增加率)을 나타내었다. 4) 두께 팽윤율(澎潤率)은 압축율(壓縮率)이 증가(增加)함에 따라 경단면(徑斷面)에서는 큰 차이(差異)가 없었으나 촉단면(觸斷面)의 경우(境遇)에는 현저(顯著)하게 증가(增加)하였다.(특(特)히 압축율(壓縮率) 40%, 50%). 5) 종압축강도(縱壓縮强度)는 압축율(壓縮率) 40%까지는 증가(增加)하였으나 압축율(壓縮率) 50%에서는 오히려 감소(減少)하였고 휨 강도(强度)는 압축율(壓縮率) 30%까지는 소재(素材)에 비(比)해 큰 변화(變化)가 없었으나 그 이상(以上)의 압축율(壓縮率)에서 감소(減少)하였으며 충격(衝擊) 휨 흡수(吸收)에너지는 압축율(壓縮率) 30%까지 증가(增加)하여 소재(素材)의 128%에 달(達)하였으나 압축율(壓縮率) 30% 이상(以上)에서는 다시 감소(減少)하였다. 결론적(結論的)으로 가열(加熱) 압축처리(壓縮處理)가 목재(木材)의 기계적(機械的) 성질(性質)을 향상(向上)시키지만 어느 일정(一定) 압축(壓縮) 수준(水準)(본(本) 실험(實驗)의 경우(境遇) 압축율(壓縮率) 30%)을 지나면 오히려 강도(强度)가 감소(減少)된다. 이와같은 현상(現象)은 가열(加熱) 압축(壓縮)으로 인(因)한 목재조직(木材組織)의 변형(變形)(수축(收縮), 균열 및 파괴) 가열(加熱)에 의(依)한 목재성분(木材成分)의 열분해(熱分解), 중합도(重合度)의 저하(低下) 등(等)이 목재(木材)의 열화(熱火)를 초래(招來)한 것으로 생각된다.

• 한국가구학회지
• /
• 제23권1호
• /
• pp.68-74
• /
• 2012

In this study domestic thinning and small diameter woods of Giant dogwood (Cornus controversa Hemsl) was used. To increase the utilizability of wood, the utilizability was proposed after manufacturing laminated wood by pressing and heating. The physical and mechanical characteristics of Laminated wood were investigated and the color change was measured, using a Chromaticity coordinates, after being pressed at 10% (45 mm), 20% (40 mm), 30% (35 mm) for 5 minutes, using Stopper, and then heated at $180^{\circ}C$ for 6, 12, 24 and 48 hours. The results were as follows. Wood density, compressive strength, MOR, MOE are increased with increasing pressing rate but decreased as heating time is increased after pressing. However, Color change is clear, dimensional stability is improved after pressing and heating.

• 한국가구학회지
• /
• 제25권2호
• /
• pp.96-103
• /
• 2014

The objective of this study was to increase the utilizability of domestic thinning and small diameter wood as applying in pattern design which can be used in interior decoration, wood craft and wood furniture, and in developing the designs of furniture and household items. We investigated the physical and mechanical characteristics of Betula platyphylla Wood by pressurization and heat treatment. Color change is clear, and the wood density is increased with increasing pressing rate. The compressive strength, modulus of rupture and modulus of elasticity in bending strength are decreased as heating time is increased after pressing. However, shrinkage is improved after pressing and heating.