• 에너지공학
• /
• 제22권2호
• /
• pp.105-111
• /
• 2013

본 연구는 빌트인 냉장고 내부를 가열하여 냉장고의 열손실 특성을 파악하는 역열손실 방법을 이용하여 냉장고의 열손실이 큰 부분이 어느 영역인지를 분석함으로써 이를 개선하는 것에 목적을 두고 있다. 이를 위해서 적외선 열화상 카메라를 이용하여 냉장고 외부 표면 온도를 측정함으로써 열손실을 분석하였으며 이를 통하여 상대적으로 열손실이 큰 부분인 얼음배출구에서의 열손실 개선을 시도하였다. 또한, 이에 관한 열전달 전산해석을 수행하여 열손실 구조를 규명하였으며 적용 가능한 열손실 개선 방안인 모서리 부분의 곡면반경을 증가하여 열손실이 개선되는 특성을 살펴보았다. 본 연구의 결과로 부터 얼음배출구 모서리 부분의 곡면 반경을 30mm로 하면 모서리 부분의 열손실이 최적으로 개선되는 것을 알 수 있었다.

• 대한기계학회논문집
• /
• 제13권2호
• /
• pp.257-264
• /
• 1989

본 연구에서는 높은 열확산의 재료까지도 수용할 수 있도록 시편의 전면 전체를 가열하는 기존의 방법으로부터, 가열하는 시편 전면의 면적을 그 중심으로 부터 임의로 조절하여 축 및 반경방향의 열흐름을 강화시켜, 반경방향의 온도를 측정한 후 이를 이용하여 열확산계수를 구할 수 있는 방정식을 제시하였다. 방정식에서는 시편의 전.후면은 물론 열원의 방사시간도 함께 다루었다.

• 설비공학논문집
• /
• 제23권5호
• /
• pp.334-341
• /
• 2011

In the present study, optimal heat supply algorithm which minimize the heat loss through the distribution pipe line in group energy apartment was developed. Variation of heating load of group energy apartment building in accord with the outdoor air temperature was predicted by the heating load-outdoor temperature correlation. Supply water temperature and mass flow rate were controlled to minimize the heat loss through distribution pipe line. District heating apartment building located in Hwaseong city, which has 1,473 households, was selected as the object building for testing the present heat supply a1gorithm. Compared to the previous heat supply system, 10.4% heat loss reduction can be accomplished by employing the present method.

• 한국기계기술학회지
• /
• 제13권2호
• /
• pp.63-70
• /
• 2011

In the present study, we developed optimal heat supply algorithm which minimizes the heat loss through the distribution pipe line in group energy apartment. Heating load variation of group energy apartment building in accordance with outdoor air temperature was predicted by the correlation obtained from calorimeter measurements of whole households of apartment building. Supply water temperature and mass flow rate were conjugately controlled to minimize the heat loss rate through distribution pipe line. Group heating apartment located in Hwaseong city, Korea, which has 1,473 households divided in 4 regions, was selected as the object apartment for verifying the present heat supply control algorithm. Compared to the original heat supply system, 10.4% heat loss rate reduction can be accomplished by employing the present control algorithm.

• 대한기계학회논문집B
• /
• 제33권7호
• /
• pp.486-494
• /
• 2009

One-dimensional modeling of $CH_4$/air premixed flame was conducted to validate the heat loss model and investigate NOx formation characteristics in the postflame region. The predicted temperature and NO concentration were compared to experimental data and previous heat loss model results using a constant gradient of temperature (100 K/cm). The following conclusions were drawn. In the heat loss model using steady-state heat transfer equation, the numerical results using the effective heat loss coefficient ($h_{eff}$) of $1.0\;W/m^2K$ were in very good agreement with the experiments in terms of temperature and NO concentration. On the other hand, the calculated values using the constant gradient of temperature (100 K/cm) were lower than that in the experiments. Although the effects of heat loss suppress NO production near the flame region, a significant difference in NO concentration was not found compared to that under adiabatic conditions. In the postflame region, however, there were considerable differences in NO emission index as well as the contribution of NO formation mechanisms. In particular, in the range of ${\phi}\;{\geq}\;0.8$, the prompt NO mechanism plays an important role in the NO reduction under the adiabatic condition. On the other hand, the mechanism contributes to the NO production under the heat loss conditions.

• 대한기계학회논문집B
• /
• 제30권4호
• /
• pp.343-349
• /
• 2006

Systematic experiments in $CH_4/Air$ counterflow diffusion flames diluted with He have been undertaken to study the oscillatory instability in which lateral flame size was less than burner nozzle diameter and thus lateral heat loss could be remarkable at low global strain rate. The oscillatory instability arises for Lewis numbers greater than unity and occurs near extinction condition. The oscillation is the direct outcome from the advancing and retreating edge flame. The dynamic behaviors of extinction in this configuration can be classified into three modes; growing, harmonic and decaying oscillation mode near extinction. As the global strain rate decreases, the amplitude of the oscillation becomes larger. This is caused by the increase of lateral heat loss which can be confirmed by the reduction of lateral flame size. Oscillatory edge flame instabilities at low global strain rate are shown to be closely associated with not only Lewis number but also heat loss (radiation and lateral heat loss).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.650-650
• /
• 2013

Although imprinted nanopatterns of organic polymer can be modified by the heat treatment [1], it generally requires high process temperatures and is material-dependent since the heat-induced mass loss of the organic polymer is greatly affected by its chemical characteristics. When oxygen is added during the annealing process, one can reduce the process temperature as well as the dependence of the materials. With the oxygen, line width reduction of a polymer (SU-8) patterns could be accomplished at temperature of as low as $250^{\circ}C$ which was not possible in the heat only process. This oxidative line width reduction can be dramatically promoted with the introduction of oxygen plasma. The oxygen plasma, with its highly-reactive oxygen species, vigorously etches away the organic materials, proven to be extremely effective line with reduction method. It is, however, very hard to control the extent and homogeneity of the etching, particularly of very fine patterns. Here, we report an effective and reliable line width reduction method of imprinted nanopatterns by combined plasma and heat treatment. The merits of this process include the reduction of process temperature, time and material-dependence.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권1호
• /
• pp.94-99
• /
• 2017

Objective: The aim of this study was to investigate the expression of heat shock protein (HSP) 90, 70, and 60 in chicken muscles and their possible relationship with quality traits of meat. Methods: The breast muscles from one hundred broiler chickens were analyzed for drip loss and other quality parameters, and the levels of heat shock protein (HSP) 90, 70, and 60 were determined by immunoblots. Results: Based on the data, chicken breast muscles were segregated into low (drip loss${\leq}5%$), intermediate (5%${\geq}9.5$) drip loss groups. The expression of HSP90 and HSP60 were significantly lower in the high drip loss group compared to that in the low and intermediate drip loss group (p<0.05), while HSP70 was equivalent in abundance in all groups (p>0.05). Conclusion: Results of this study suggests that higher levels of HSP90 and HSP60 may be advantageous for maintenance of cell function and reduction of water loss, and they could act as potential indicator for better water holding capacity of meat.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.24-31
• /
• 2004

A cylindrical constant volume combustion bomb is used to investigate the combustion characteristics and to analyzer the heat quantity of inhomogeneous charge methane-air mixture. To analyze the heat quantity, some definitions including the CHR ratio, the UHC ratio and the HL ratio are needed and are calculated. It is shown that the effect of stratification is not significant in case of the overall excess air ratio of 1.1, mainly due to the higher heat loss and lower thermal efficiency compared to those of homogeneous condition. In the case of the overall excess air ratio of 1.4, as the initial charge pressure decreases, the CHR ratio has been decreased while the HL ratio has been increased, Generally, as the initial charge pressure increases, the amount of injection mixture has been decreased and has resulted in lower mean velocity and turbulence intensity for injection mixture. Also, the injected mixture is too rich to result in mixing deficiency in combustion chamber. From these results, it could be possible to acquire the improvement of thermal efficiency and the reduction of heat loss simultaneously through the 2-stage injection in CNG direct injection engine.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1465-1472
• /
• 2009

완전혼합 반응기에서 외부로의 열손실이 $CH_4/air$예혼합화염의 NOx 생성특성에 미치는 영향을 수치해석으로 검토하였다. 주요 결과로서, 단열조건에서 NOx는 체류시간에 따라 급격히 증가하는 반면에, 열손실이 고려될 때 열전 달 상수와 체류시간의 증가에 따라 NOx 저감현상이 뚜렷하게 발생하였다. 민감도 해석을 통해 열손실율이 증가함에 따라 Thermal NO 기구와 Re-burning NO 기구는 NOx 저감에 크게 기여하는 반면, Prompt NO 기구와 $N_2O$-경유 NO 기구는 오히려 NOx 증가에 기여함을 확인하였다. NOx 생성기구는 열전달 상수 및 체류시간의 변화에 따라 매우 복합한 특성을 갖지만, NOx 농도는 독립된 Thermal NO 기구에 의해 표현될 수 있었다. 이를 통해 실용 $CH_4/air$예혼합 연소기에서 NOx 농도를 예측할 수 있는 열손실율과 체류시간을 조합한 새로운 NOx 상관식이 도출되었다.