• 한국산업보건학회지
• /
• 제10권2호
• /
• pp.98-108
• /
• 2000

Controlling the over-exposure of welding fumes is not an easy problem because neither general nor local exhaust ventilation systems could be successfully applied. A jet air supplying welding mask was development to reduce the exposure level of welding fumes. The jet airs tream pushes the welding fumes away from the breathing zone by using the frictional characteristic of jet. Laboratory experiments were conducted to optimize the efficiency of controlling welding fumes. Thereafter, its performance was tested in a laboratory and an industrial field. The efficiencies of reducing the welding fume exposure were about 90% and 80% in a laboratory and an industrial field, respectively. Additionally, it resulted in elimination of heat inside the mask and enhancement of clear visuality.

• 한국수산과학회지
• /
• 제53권5호
• /
• pp.733-739
• /
• 2020

Olive flounder Paralichthys olivaceus (total weight 216.4±14.6 g, total length 28.4±1.7 cm) were exposed to different pH levels (3, 4, 5, 6, 7, 8, and 9) for 96 h. At pH 4, hemoglobin decreased significantly, while plasma calcium, glucose, cholesterol, and ALP increased significantly. Exposure to pH 4 also induced stress responses, as evidenced by a significant decrease in heat shock protein 70 (HSP 70) and a significant increase in cortisol. The results of this study indicate that acute exposure to acidic or alkaline pH (pH 3 or 9) induced significant mortality, while exposure to pH 4significantly affected hematological parameters and stress responses in P. olivaceus.

• Elastomers and Composites
• /
• 제55권4호
• /
• pp.270-276
• /
• 2020

The long-term durability of an FKM O-ring used as parts of a hydrogen station was investigated by exposing it to high-pressure gaseous hydrogen for 1, 3, and 7 days at room temperature. Changes in its sealing force were subsequently measured at 150℃ using intermittent compression stress relaxation (CSR). No changes in the tensile properties of FKM O-ring were observed, but its initial and overall sealing forces at 150℃ significantly decreased with increasing exposure time to hydrogen gas. Microvoid formation in the FKM O-ring upon exposure to high-pressure hydrogen was minimized over time after the ring was exposed to atmospheric pressure at room temperature, which prevented changes in its tensile properties. However, applying heat accelerated FKM O-ring oxidation, which decreased its sealing force. These results indicated that identifying changes in the sealing force of rubber materials using intermittent CSR is not sufficient for monitoring changes in mechanical properties under high-pressure hydrogen atmospheres; however, it is suitable for evaluating the long-term durability of sealing materials for hydrogen station applications under similar conditions.

• 보건교육건강증진학회지
• /
• 제31권4호
• /
• pp.51-62
• /
• 2014

Objectives: The objective of study was to calculate the municipal level environmental burden of disease (EBD) due to heat wave. Methods: The data used were Korea National Health Insurance 2011 claim data and 2011 death registry. Heatwave related diseases included hypertensive heart diseases, ischemic heart diseases, cerebrovascular disease, and heat related illness. According to the method that WHO proposed, the study computed population-attributable fraction with relative risk which come from previous study and proportion of exposure which the study calculated with historical meteorology data. Results: The Average of 251 municipal EBD was 2.11 per thousand persons. The value of years lost due to disability was 11 times higher than that of years of life lost. On average EBD of county and southern geographical areas tended to be higher than those of District or city areas. The relationship between municipal deprivation index (composite deprivation index) and EBD showed the positive association, which means that the worse deprived municipal is, the higher EBD takes. Conclusions: Climate change is getting one of the major risk factors of cardio-cerebrovascular disease, which is the second leading cause of death. The study results suggested the urgent policy planning and reaction of climate change adaptation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권6호
• /
• pp.912-916
• /
• 2008

Pre-slaughter conditions affect poultry meat quality. Therefore, stresses before slaughter like heat stress, struggle and shackling on the shackle line, crating and transport and feed withdrawal are very important for the poultry industry in respect of quality as well as welfare of the birds. However, exposure to heat in oxidative stress can in turn lead to cytotoxicity in meat type birds. Chickens exposed to heat stress before slaughter showed the lowest ultimate pH and birds shackled for a longer time the highest. The abdominal fat content was higher in heat stressed birds. Struggling on the shackle line hastened the initial rate of the pH drop and increased the redness of breast meat. Again, with increasing struggling activity, lactate concentration in breast muscle of chicken increased. Paler meat was found in birds that were transported for a longer time than in those after a small journey or not transported. The pre-slaughter and eviscerated weights were decreased as the length of feed withdrawal period increased.

• Journal of Microbiology and Biotechnology
• /
• 제22권1호
• /
• pp.118-125
• /
• 2012

Heat shock proteins (Hsps) play a key role in the cellular defense response to diverse environmental stresses. Here, the role of Hsp genes in the acquisition of thermotolerance in the cyanobacterium Microcystis aeruginosa NIES-298 was investigated. Twelve Hsp-related genes were examined to observe their modulated expression patterns at different temperatures (10, 15, 25, and $35^{\circ}C$) over different exposure periods. HspA and HtpG transcripts showed an up-regulation of expression at low temperatures (10 and $15^{\circ}C$) and high temperature ($35^{\circ}C$), compared with the control ($25^{\circ}C$). To examine their effects upon thermotolerance, we purified recombinant HspA and HtpG proteins. During a thermotolerance study at $54^{\circ}C$, the HspA-transformed bacteria showed increased thermotolerance compared with the control. HtpG also played a role in the defense response to acute heat stress within 30 min. These findings provide a better understanding of cellular protection mechanisms against heat stress in cyanobacteria.

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.232-232
• /
• 2000

The hydrogen attack characteristics of 3Cr-1Mo-V steel as simulated weld heat affected state were studied in this paper. The hydrogen attack susceptibility was evaluated by the ratios of Charpy impact absorbed energy at 0℃($vE_{0HA}$/$vE_{0}$) and reduction of area by tensile test ($RA_{HA}$/RA) before and after exposure to hydrogen at 600℃ under 450kgf/㎠ for 300hr. The values of $vE_{0HA}$/$vE_{0}$ and $RA_{HA}$/RA were aggravated as the peak temperature of the simulated heat affected zone(HAZ) raised. These results were due to the increase of the possession of bubbles along the grain boundaries, which were resulted in the reduction of grain boundary area to be precipitated carbides due to grain coarsening and the carbon dissolved in the martensite-austenite constituent near by the prior austenite grain boundary. The possession ratio of methane bubbles formed along prior austenite grain boundaries were increased with raising the peak temperature. (Received February 22, 2000)

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.105-111
• /
• 2000

The hydrogen attack characteristics of 3Cr-1Mo-V steel as simulated weld heat affected state were studied in this paper. The hydrogen attack susceptibility was evaluated by the ratios of Charpy impact absorbed energy at 0℃({TEX}$vE_{0} {HA}_/vE_{0}${/TEX}) and reduction of area by tensile test({TEX}$RA_{HA}/RA${/TEX}) before and after exposure to hydrogen at 600℃ under 450kgf/㎠ for 300hr. The values of {TEX}$vE_{0} {HA}_/vE_{0}${/TEX} and {TEX}$RA_{HA}/RA${/TEX} were aggravated as the peak temperature of the simulated heat affected zone(HAZ) raised. These results were due to the increase of the possession of bubbles along the grain boundaries, which were resulted in the reduction of grain boundary area to be precipitated carbides due to grain coarsening and the carbon dissolved in the martensite-austenite constituent near by the prior austenite grain boundary. The possession ratio of methane bubbles formed along prior austenite grain boundaries were increased with raising the peak temperature.

• 한국산업보건학회지
• /
• 제27권1호
• /
• pp.46-58
• /
• 2017

Objectives: Particulate matter (PM) at construction sites mostly originates from either construction activities or the atmospheric environment. This study was conducted to evaluate the exposure level to PM and the contribution ratio of atmosphere sources at construction sites. Methods: We reviewed literature and governmental systems related to PM exposure in occupational settings and summarized them. In the field evaluation, five construction sites and one golf course were selected: two from Gyeonggi-do Province and four from North Gyeongsang-do Province. For each site, personal samples from outdoor construction workers and area samples from the outdoor area around the construction site office were collected according to construction work types. PM concentrations reported from nearby National Ambient Air Monitoring Stations were recorded. Respirable dust concentrations, respirable silica concentrations, and several metal concentrations including Cd, Cr, Pb, and As were monitored over four months. In the end we suggested how to manage particulate matter exposure at construction sites. Results: There was little literature reporting on exposure levels of construction workers to PM. Respirable dust concentrations measured in Gyeonggi-do Province were higher than those measured in North Gyeongsang-do Province. The geometric means of respirable dust concentrations in personal samples and area samples were $37.89{\mu}g/m^3$ and $92.86{\mu}g/m^3$, respectively. The respirable dust concentrations were higher than the PM concentrations reported from nearby National Ambient Air Monitoring Station. The geometric means of respirable silica concentrations of personal samples and area samples were $1.3{\mu}g/m^3$ and $1.1{\mu}g/m^3$, respectively. All metal concentrations were lower than 10% of individual Korean occupational exposure limits. Conclusions: Assuming that personal samples consisted of ambient PM and dust originating from work activities and area samples only collected ambient PM, we concluded that the dust exposure of outdoor construction workers originated 40.8% from the atmosphere and 59.2% from construction activities. PM exposure at construction sites should be controlled by employers, as in the case of outdoor heat stress. The Korean government needs to consider setting an occupational exposure limit for respirable dust.

• 세라미스트
• /
• 제10권3호
• /
• pp.86-90
• /
• 2007

Novel photochromic oxide glasses are presented in this section. These glasses are based on phosphate formers containing both tungsten and antimony atoms. Exposure to visible continuous or pulsed laser beam results in an intense photochromic effect witch is shown to occur in the volume of the glass and results in a broad absorption band in the visible and near infrared. This effect was not identified to be related with a structural change and is assumed to be entirely electronic. A change in the absorption coefficient is observed in function of tungsten content, exposure time and increases with beam power. These glasses have been investigated regarding the possibility of holographic data storage using visible lasers sources. Changes in both refractive index and the absorption coefficient were measured using a holographic setup. The modulation of the optical constants is reversible by heat treatment.