• 한국전산구조공학회논문집
• /
• 제24권2호
• /
• pp.193-200
• /
• 2011

본 연구를 통해 superlite라 불리는 단열 파우더를 채용한 NO96 멤브레인 타입 LNG선 단열 화물창의 만선항해 시 LNG의 BOR(Boil-Off Rate) 예측모델을 제시하였다. LNGCC(LNG Cargo Containment)의 비정상상태 열전달 FEM모델은 만선항해 시 대기 및 해수 조건을 반영하고 복잡한 화물창 단열구조에 균질화 기법을 적용하여 구축하였다. BOR은 만선항해중 LNGCC 내부로 침입하는 총 열량을 이용하여 평가되었으며, 주요 변수에 따른 BOR의 변화는 파라메트릭 열전달해석을 통하여 분석하였다. 그리고 파라메트릭 BOR 특성해석 결과를 토대로 LNG선의 탱크 크기, 단열층의 두께 그리고 superlite의 열전도율을 함수로 하는 BOR 예측모델을 유도하였다. 비선형 과도 열전달해석을 통해 직접 구한 BOR과의 비교를 통해 유도한 예측모델은 최대 1% 이내의 상대오차를 나타내었다.

• 대한기계학회논문집B
• /
• 제37권1호
• /
• pp.81-86
• /
• 2013

소형디젤 발전기의 배기가스는 양적 및 질적 수준에서 유용하게 활용되기에는 부족한 폐열원으로 간주된다. 그러나 본 연구에서는 이러한 배기가스의 폐열을 히트파이프에 의해 회수하고 다중효용확산 증발에 의해 효율적으로 열을 이용하는 해수담수기를 제안하였다. 제안한 증류기는 $171^{\circ}C$의 배기가스에서 52 W 의 폐열을 회수할 수 있고, 이 회수 열량 중 약 85%가 약 70 g/h의 담수를 생산할 수 있는 유용한 열량으로 사용된다. 이 결과는 50cc, 4 행정 엔진을 가진 극소형 발전기의 폐열에 대하여 단효용 장치의 실험값이므로, 10 중효용으로 구성할 경우 약 500 g/h 의 성능을 가질 수 있는 것으로 계산되었다. 따라서 본 증류기는 전기와 담수가 동시에 부족한 지역에서 실제 필요한 식수량을 확보할 수 있는 소용량 담수화장치로 유용하게 활용될 수 있다.

• 한국결정성장학회지
• /
• 제20권6호
• /
• pp.283-288
• /
• 2010

나노 크기의 NiO 분말을 Ni 산성염과 Ni 염기성염을 혼합하여 제조하는 방법에서 원료가 생성되는 NiO와 이의 환원으로 생성되는 Ni 결정 특성에 미치는 영향을 연구하였다. 산성염으로는 Ni formate를 염기성염으로는 수산화 Ni과 염기성 Ni 탄산염을 사용하였다. 혼합비는 산성염 1당량에 염기성염 9당량을 사용하였으며, 탄산염을 사용한 경우 $750^{\circ}C$/2 h 하소에서도 ~100 nm의 구형의 NiO 분말을 얻었으며, 수산화 염을 사용한 경우는 $600^{\circ}C$/2 h에서는 ~100 nm의 유사 구형의 NiO가 생성되나, $750^{\circ}C$ 열처리에서는 100~600 nm의 유사 입방체 분말을 얻었다. 수산화 염을 사용한 경우에는 탄산염을 사용한 경우에 비하여 수소가스에 의한 환원이 훨씬 빠르게 진행되어 necking이 일어나며 소결이 이루어져 다공체를 형성하였다. 이들 특성을 TG/DSC, XRD, SEM으로 분석하였다.

• 전자공학회논문지
• /
• 제53권10호
• /
• pp.123-130
• /
• 2016

고주파 유도가열장치는 LC 공진회로에 고주파 전원을 인가하여 금속을 가열 할 수 있다. 공진회로는 워크 코일과 전도 냉각 커패시터로 구성되며, 커패시터의 특성에 따라 열처리 설비의 성능을 좌우한다. 그러나 전도 냉각 커패시터는 국내 원천기술의 연구개발 부족으로 해외 수입 의존도가 높다. LC 공진 시 커패시터 내부의 발열을 최소화하고, 무효 전력손실을 줄이며, 내 전압특성이 우수한 커패시터가 요구된다. 국산화를 위하여, 선진 제조사의 완성품 커패시터의 주파수 응답 특성 분석에 대한 선행 연구가 필요하다. 주어진 로그-로그 특성 곡선의 임의 점에서 값을 읽기 위한 보간법을 연구하여 매틀랩 코딩으로 커패시터의 분석 도구로 적용하였다. 커패시터를 간단 화 된 RC 직렬 등가 회로로 가정하고, 등가 직렬 저항 ESL 값을 구하여 주파수 응답 특성 곡선을 재현하는 시뮬레이션을 시도하였다. 실제 무효전력의 피크 치에 대한 특성과 시뮬레이션 특성을 비교할 때 재현율이 83% 이상 결과 값으로 나타나는 것을 확인할 수 있었고, 이 알고리즘은 간단화 된 모델의 커패시터 특성곡선을 분석하여 예측 할 때 적용이 가능하다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.97-97
• /
• 2009

The use of thin plate increases due to the need for light weight in large ship. Thin plate is easily distorted and has residual stress by welding heat. Therefore, the thin plate should be carefully joined to minimize the welding deformation which costs time and money for repair. For one effort to reduce welding deformation, it is very useful to predict welding deformation before welding execution. There are two methods to analyze welding deformation. One is simple linear analysis. The other is nonlinear analysis. The simple linear analysis is elastic analysis using the equivalent load method or inherent strain method from welding experiments. The nonlinear analysis is thermo-elastic analysis which gives consideration to the nonlinearity of material dependent on temperature and time, welding current, voltage, speed, sequence and constraint. In this study, the welding deformation is analyzed by using thermo-elastic method for PCTC(Pure Car and Truck Carrier) which carries cars and trucks. PCTC uses thin plates of 6mm thickness which is susceptible to welding heat. The analysis dimension is 19,200mm(length) * 13,825mm(width) * 376mm(height). MARC and MENTAT are used as pre and post processor and solver. The boundary conditions are based on the real situation in shipyard. The simulations contain convection and gravity. The material of the thin block is mild steel with $235N/mm^2$ yield strength. Its nonlinearity of conductivity, specific heat, Young's modulus and yield strength is applied in simulations. Welding is done in two pass. First pass lasts 2,100 second, then it rests for 900 second, then second pass lasts 2,100 second and then it rests for 20,000 second. The displacement at 0 sec is caused by its own weight. It is maximum 19mm at the free side. The welding line expands, shrinks during welding and finally experiences shrinkage. It results in angular distortion of thin block. Final maximum displacement, 17mm occurs around welding line. The maximum residual stress happens at the welding line, where the stress is above the yield strength. Also, the maximum equivalent plastic strain occurs at the welding line. The plastic strain of first pass is more than that of second pass. The flatness of plate in longitudinal direction is calculated in parallel with the direction of girder and compared with deformation standard of ${\pm}15mm$. Calculated value is within the standard range. The flatness of plate in transverse direction is calculated in perpendicular to the direction of girder and compared with deformation standard of ${\pm}6mm$. It satisfies the standard. Buckle of plate is calculated between each longitudinal and compared with the deformation standard. All buckle value is within the standard range of ${\pm}6mm$.

• 대한기계학회논문집A
• /
• 제27권5호
• /
• pp.705-712
• /
• 2003

Analysis for the thermal stress distribution in the laminated plates containing a hot-spot(local heating region) is performed. It is assumed that the local heating region induces only mechanical stress by the thermal expansion but effect of the thermal conduction is neglected. The region is regarded equivalent to a homogeneous inclusion expanding in a laminated medium. As an example, Au/YBCO/Al$_2$O$_3$laminate which is often employed for High Temperature Superconducting Fault Current Limiter(HTS FCL) has been analyzed. Effects of heat input, thickness of each layer and the got spot size upon the stress distribution in the hot-spot have been investigated. For a constant heat generation into the hot-spot, as the thickness of the Al$_2$O$_3$substrate increases, the stress in the YBCO layer is peculiarly oscillated, and the curvature of laminate has a maximum at a certain thickness of the Al$_2$O$_3$.

• 대기
• /
• 제20권4호
• /
• pp.505-518
• /
• 2010

We investigated the impacts of the diabatic heating location, vertical profile and basic state on the Rossby wave propagation. To examine the dynamical process of individual responses on the regional heat source, a dry version of the linear baroclinic model was used with climatological summertime (JJA) mean basic state and vertical structure of the diabatic heating for 1979-2008. Two sets of diabatic heating were constructed of those positioned in the mid-latitudes (Tibetan Plateau, eastern Mediterranean Sea, and the west-central Asia) and the tropics (the southern India, Bay of Bengal, and western Pacific). It was found that using the principal component analysis, atmospheric response to diabatic heating reaches to the steady state in 19th days in time. The prescribed mid-latitude forcing forms equivalent barotropic Rossby wave propagation along the westerly Asia jets, whereas the tropical forcing generates the Rossby wave train extending from the tropics to mid-latitudes. In relation to the maximum vertical profile, the mid-level forcing reveals a stronger response than the lower-level forcing, which may be caused by more effective Rossby wave response by the upper-level divergent flow. Under the different sub-seasonal mean state, both of the tropical and mid-latitude forcing induce the different sub-seasonal response intensity, due to the different basic-state wind.

• 한국압력기기공학회 논문집
• /
• 제12권2호
• /
• pp.50-57
• /
• 2016

The study presents structural integrity assessment of ductility degradation of a baffle former assembly by performing finite element analysis considering real loading conditions and stress triaxiality. Variations of fracture strain curves of type 304 austenitic stainless steel with stress triaxiality are derived based on the previous study results. Temperature distributions during normal operation such as heat-up, steady state, and cool-down are calculated via finite element temperature analysis considering gamma heating and heat convection with reactor coolant. Variations of stress and strain state during long operation period are also calculated by performing sequentially coupled temperature-stress analysis. Fracture strain is derived by using the fracture curve and the stress triaxility. Finally, variations of ductility degradation damage indicator with the fracture strain and the equivalent inelastic strain are investigated. It is found that maximum value of the ductility degradation damage index continuously increases and becomes 0.4877 at 40 EFPYs. Also, the maximum value occurs at top and middle inner parts of the baffle former assembly before and after 20 EFPYs, respectively.

• 한국자동차공학회논문집
• /
• 제23권5호
• /
• pp.486-493
• /
• 2015

In this paper, a battery model for electric vehicle virtual platform was developed. A battery model consisted of a battery cell model and battery thermal management system. A battery cell model was developed based on Randles equivalent circuit model. Circuit parameters in the form of 3D map data was obtained by charge-discharge experiment of Li-Polymer battery in various temperature condition. The developed battery cell model was experimentally verified by comparing voltages. Thermal management system model was also developed using heat generator, heat transfer and convection model, and cooling fan. For verification of the developed battery model in vehicle level, the integrated battery model was applied in to EV(electric vehicle) virtual platform, and virtual driving simulation using UDDS velocity profile was conducted. The accuracy of the developed battery model has been verified by comparing the simulation results from EV platform with the experimental data.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.41-48
• /
• 2016

To investigate the effect of long-term thermal aging on the microstructural and mechanical characteristics of weldment made of nickel base alloy and its weld metal, an accelerated heat treatment was applied to simulate the process of long-term thermal aging in the operating condition of nuclear power plant. A representative nickel-based weldment with Alloy 600 and Alloy 182 was fabricated and heat-treated at $400^{\circ}C$ for 1,713 h and 3,427 h to simulate the thermal aging for the period equivalent to 15 and 30 years in operating pressurized water reactors, respectively. The microstructural and mechanical characteristics were analyzed by using optical microscopy, scanning electron microscopy and Vickers microhardness measurement. Changes were observed in precipitation behavior and microhardness of each specimen, and these changes were mainly attributed to the change in precipitated morphology and residual stress across the weld during the thermal aging process.