• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.211-217
• /
• 2017

In this study, we investigated to the heat transfer performance of coating nano-structure with various shapes and patterns on the heat transfer surface. As a result of the measurement of the 3D nano shape, it was confirmed that the roughness generally increases when the adhesive is sprayed on the coating surface and finished durability experiment. In the case of TEOS adhesive, the roughness increased by $0.074{\mu}m$, $0.012{\mu}m$ and $0.015{\mu}m$, and the contact angle decreased $12.64^{\circ}$, $1.31^{\circ}$, $9.84^{\circ}$ at the coating time of 120 seconds, 180 seconds and 240 seconds, respectively. In the case of PVA adhesive, the roughness increased by $0.069{\mu}m$, $0.056{\mu}m$ and $0.03{\mu}m$, and the contact angle decreased $2.85^{\circ}$, $4.82^{\circ}$, $6.96^{\circ}$ at the coating time of 120 seconds, 180 seconds and 240 seconds, respectively. In the case of DGEBF adhesive, the roughness increased by $0.042{\mu}m$, $0.053{\mu}m$ and $0{\mu}m$, and the contact angle decreased $0.81^{\circ}$ at the coating time of 120 seconds, increased $4.82^{\circ}$, $6.96^{\circ}$ at the coating time of 180 seconds and 240 seconds, respectively. As a result, the durability tends to decrease as more nano-structures are deposited, and 3D nano shapes, contact angles and SEM photographs showed that the performance of the PVA adhesive was superior among the three adhesives.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.3
• /
• pp.161-173
• /
• 2023

This study investigated the effects of K_N and process time on the formation of a compound layer at a nitriding temperature of 540℃ for SCR420H material. As a result of controlled nitriding from 3 h to 20 h at K_N 1.2 atm^-1/2, compound layers were formed up to about 10 ㎛, and an effective hardening depth of about 460 ㎛ was obtained. Initially, an ε+γ' complex phase was formed, and the phase fraction changed over time, and finally, the fraction of ε phase decreased to less than 1%. With higher K_N, the compound thickness increased, a pore layer was formed on the surface, and the surface hardness decreased. By applying the controlled nitriding process, it was possible to produce annulus gears with a compound thickness of 12.8 ㎛ and an ε phase of 5% or less. The annulus gears made through controlled nitriding were mounted on a 6-speed transmission and tested for durability. As a result, the durability test of 250,000 km was satisfied, and the transmission efficiency was also confirmed to be expected.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.487-496
• /
• 2009

The sapwood of yellow poplar is very bright while its heartwood is usually greenish which changes to dark brown with weathering. This difference in color value between sapwood and heartwood causes difficulty in using yellow poplar as higher value added materials such as interior finish and furniture part. In this study, hot-water treatment, vacuum-heat treatment and oven-heat treatment were carried out to reduce the difference in color value between heartwood and bright sap wood and to increase durability. FT-IR analysis, contact angle measurement and decay test were carried out to find out the mechanism of functional group change and the increment of durability by heat treatment. The result of decrement ratio of color difference were 45.7% by hot-water treatment, 26.8% by vacuum-heat treatment, and 60.2%, 87.8%, and 88.8% by $180^{\circ}C$, $200^{\circ}C$ and $220^{\circ}C$ oven-heat treatments respectively. Furthermore, it has been found that oven-heat treatment causes decrement of mass loss by decay in this study. It is suggested that oven-heat treatment could be environmentally friendly preservative treatment without chemicals.

• Geomechanics and Engineering
• /
• v.38 no.6
• /
• pp.593-601
• /
• 2024

In this paper, the quantitative evaluation method is presented for the durability performance of mountain tunnel concrete linings experiencing freezing and thawing during winter season. To analyze the freeze-thaw characteristics of lining, the freezing time of the concrete lining was measured by the outside temperature. The heat flow analysis was conducted based on the freezing time measured through the indoor experiment, and based on this, the energy required to freeze the concrete lining by the temperature of the outside air could be analyzed. In addition, the temperature change during the winter season was measured through an instrument installed on the actual tunnel concrete lining, and based on the results of indoor and field experiments, criteria for freeze-thaw environment evaluation and progress evaluation were prepared. Also, an equation using the freezing index was proposed through regression analysis.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.11a
• /
• pp.33.2-33.2
• /
• 2008

• Journal of Sensor Science and Technology
• /
• v.9 no.4
• /
• pp.327-333
• /
• 2000

Transversal SAW(Surface Acoustic Wave) filters of 340MHz were fabricated on piezoelectric substrates of the LN $128^{\circ}$ Y-X wafers. Both of spacing and width of IDT were $1.435{\mu}m$. For improving the power durability characteristics, titanium layer was inserted between aluminum electrode and piezoelectric substrate since it has high density, low thermal expansion coefficient, and good adhesive properties. Power durability was evaluated with respect to the thickness of inserted titanium layer and the temperature of heat treatment. Power durability is improved with increasing the thickness of the inserted titanium layer. Moreover, it is remarkably improved by heat treatment at the temperature of $300^{\circ}C$.

• Journal of the Korea Concrete Institute
• /
• v.23 no.6
• /
• pp.757-763
• /
• 2011

In order to secure the effective high early age strength of the concrete, the study was carried out with a goal of functional improvement of cement. This study was carried out as a follow up for the previous study, which analyzed the high early age strength and durability of concrete mixed with fine particle cement (FC) during cement production. The experimental results showed that the target range for each mix was satisfied at fresh state of concrete. Also, when mixed with fine particles cement, the setting time improved. Additionally, compressive strength and heat of hydration increased and remained same, respectively. Especially, the durability remained same even when mixed with fine particle cement.

• Ceramist
• /
• v.21 no.2
• /
• pp.83-88
• /
• 2018

There is close relation between the heat generation and the performance of electronic device. The durability and efficiency of the device are degraded due to heat generation. It is necessary to release the generated heat from an electronic device. Based on demands of the printed circuit board (PCB) manufacturing, the robust and reliable plating technique of PCB is necessary. In this study, we review various methods for improving the heat sink property. These methods were considered to enhance the adhesion between ceramic substrate as heat sink and metal layer as electrode.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.425-428
• /
• 2006

The bigger of concrete strctures by a construct technique improvement, and the increase of the cement quantity which is caused by with use of the high-strength concrete for the load-carrying-capacity and a durability cause temperature cracks by a heat of hydration. The temperature crack due to the heat of hydration classified a nonstructural crack. but it has a bad effect on durability of concrete structures. especially, in case of a subway concrete box structure, when a water-proof facilities is beaked on an outer-wall, the water leakage occurs through a penetration crack generated from a wall of the concrete structure too. This paper, for the subway concrete box strucuture, the use of blended cement, the temperature of air and concrete, control joint, was considered and analysed by a three dimensional finite element method.

• Mycobiology
• /
• v.33 no.2
• /
• pp.121-123
• /
• 2005

Extracellular keratinase isolated from Aspergillus flavus K-03 was immobilized on calcium alginate. The properties and reaction activities of free and immobilized keratinase with calcium alginate were characterized. The immobilized keratinase showed proteolytic activity against soluble azo-casein and azo-keratin, and insoluble feather keratin. Heat stability and pH tolerance of keratinase were greatly enhanced by immobilization. It also displayed a higher level of heat stability and an increased tolerance toward alkaline pHs compared with free keratinase. During the durability test at $40^{\circ}C$, 48% of the original enzyme activity of the immobilized keratinase was remained after 7 days of incubation. The immobilized keratinase exhibited better stability, thus increasing its potential for use in industrial application.