• 한국환경보건학회지
• /
• 제31권6호
• /
• pp.498-503
• /
• 2005

Stability of soybean isoflavone isomers according to extraction conditions such as temperature, pH, and extracting solvents was investigated. Heating induced three chemical reactions to occur for malony1 derivatives of isoflavones, namely decarboxylation of malony1 groups into acety1 derivatives, deesterification of malony1 residues, and hydrolysis of $\beta$-glycosidic bonds. Among the twelve isoflavone isomers, change in concentrations of acety1glycosides were most pronounced: Acety1 derivatives were present only in trace amounts in unheated hypocotyls, but the content increased dramatically during heating. As for the glycosides, concentrations of daidzin and glycitin increased due to heat treatment, though that of genistin remained almost unchanged. Heat decomposition rates and the patterns differed among the three malony1 derivatives. After 120 min at $80^{circ}C$, the relative concentrations of daidzin, glycitin and genistin were increased from $9.2\%$, $12.4\%$ and $3.3\%$ to $19.3\%$, $21.9\%$ and $6.2\%$, respectively. When crude isoflavones were solubilized in glycine buffer (pH 10.0) and incubated at $80^{circ}C$, deesterification occurred faster than at pH 7.0. When the pH of isoflavone solution was increased, the malony1glycosides were hydrolyzed to their respective glycosides at increased rate. Both acetyl and aglycone forms were unchanged and only de-esterification reactions occurred. At the acidic pH, malonylglycosides were much stable both at 60 and $80^{circ}C$. However at pH 10, $80^{circ}C$ and 1 hr, $75-80\%$ of malonylglycosides were transformed to their deesterified glycosides. When isoflavones were extracted with $60\%$ aqueous ethanol at $60^{circ}C$, isoflavone isomers were stable and the deesterification reactions did not occur in these conditions. However, at $80^{circ}C$ deesterification of malonyiglycosides occurred significantly with $15-20\%$ of malonylglycosides being hydrolyzed into their respective glycosides. This experiment showed that malonylglycosides undergo decomposition when heated or exposed to alkaline conditions. Also, aqueous ethanol was preferred to aqueous methanol as solubilizing media for obtaining extract with minimum degradation of malonylglycosides.

• 대한기계학회논문집A
• /
• 제31권5호
• /
• pp.550-555
• /
• 2007

The effective fracture toughness testing of materials intended for application in Micro Electro Mechanical Systems (MEMS) devices is required in order to improve understanding of how micro sized material used in device may be expected to perform upon the micro scale. ${\gamma}$-TiAl based materials are being considered for application in MEMS devices at elevated temperatures. Especially, in Alloy 4, both ${\alpha}_2$ and ${\gamma}$ lamellae were altered markedly in 3,000 h, $700^{\circ}C$ exposure. Parallel decomposition of coarse ${\alpha}_2$ into bunches of very fine (${\alpha}_2+{\gamma}$) lamellae. Parallel decomposition of coarse ${\alpha}_2$ into bunches of very fine (${\alpha}_2+{\gamma}$) lamellae. The materials were examined 2 types Alloy 4 on heat exposed specimen($700^{\circ}C$, 3,000 h) and no heat exposed one. Micro sized cantilever beams were prepared mechanical polishing on both side at $25{\sim}30{\mu}m$ and electro final stage polishing to observe lamellar orientation of same colony with EBSD (Electron Backscatter Diffraction Pattern). Through lamellar orientation as inter-lamellae or trans-lamellae, Cantilever beam was fabricated with Focused Ion Beam(FIB). The directional behavior of the lamellar structure was important property in single material, because of the effects of the different processing method and variations in properties according to lamellar orientation. In MEMS application, it is first necessary to have a reliable understanding of the manufacturing methods to be used to produce micro structure.

• 열처리공학회지
• /
• 제7권1호
• /
• pp.44-52
• /
• 1994

In order to investigate the effect of tempring treatment on the mechanical properties of ausformed martensite in Fe-30%Ni-0.35%C alloy, the hardness, yield strength and elongation were examined by tensile test. 1. The strength of deformed austenite in Fe-30%Ni-0.35%C alloy was increased due to the work hardening induced from the dislocation density increased during deformation. The strength of ausformed martensite was increased because of defects inherited from deformed austenite by martensitic transformation. 2. The ductility of ausformed martensite was shown a nearly constant values independent of deformation degrees because of the interaction of multiple factors such as increased retained austenite, formation of void and decrement of twin in ausformed martensite. 3. The strength of ausformed martensite by tempering treatment was shown a little decrement up to $340^{\circ}C$, especially showed remarkable softening resistance in higher deformation degrees. 4. Virgin martensite and ausformed martensite were shown a maximum yield strength by clustering in tempering at $100^{\circ}C$ and above $100^{\circ}C$, yield strength was very small decreased due to the decrement of solute carbon by the destruction of clustering. 5. The decomposition of retained austenite was not shown up to $450^{\circ}C$ in ausformed martensite with tempering treatment, and the matrix was rapidly softening because of the decomposition of martensite and the formation of reversed austenite with tempering above $400^{\circ}C$.

• 한국재료학회지
• /
• 제28권9호
• /
• pp.511-515
• /
• 2018

W-10 wt% Ti alloys that have a homogeneous microstructure are prepared by thermal decomposition of $WO_3-TiH_2$ powder mixtures and spark plasma sintering. The reduction and dehydrogenation behavior of $WO_3$ and $TiH_2$ are analyzed by temperature programmed reduction and a thermogravimetric method, respectively. The X-ray diffraction analysis of the powder mixture, heat-treated in an argon atmosphere, shows W- oxides and $TiO_2$ peaks. Conversely, the powder mixtures heated in a hydrogen atmosphere are composed of W, $WO_2$ and $TiO_2$ phases at $600^{\circ}C$ and W and W-rich ${\beta}$ phases at $800^{\circ}C$. The densified specimen by spark plasma sintering at $1500^{\circ}C$ in a vacuum using hydrogen-reduced $WO_3-TiH_2$ powder mixtures shows a Vickers hardness value of 4.6 GPa and a homogeneous microstructure with pure W, ${\beta}$ and Ti phases. The phase evolution dependent on the atmosphere and temperature is explained by the thermal decomposition and reaction behavior of $WO_3$ and $TiH_2$.

• 한국식품과학회지
• /
• 제11권3호
• /
• pp.188-191
• /
• 1979

5-GMP의 열 분해 반응을 pH 5.52에서 7.00의 범위에서 조사하였다. 그 반응 속도는 일차 반응으로 나타났으며, 용액의 pH가 $pKa_2$일 때 반응속도가 가장 컸다. 5'-GMP의 분해 반응은 온도 의존성을 나타냈으며, $93^{\circ}C$에서 $108^{\circ}C$ 범위에서 Arrhenius식을 따르고 있었고, 반응 속도 상수는 $pKa_2$ 이상의 중성 용액 근처에서는 온도 및 pH의 함수로서 다음과 같이 표시되었다. $$K=4.19{\times}10^{26}\;Exp[-1.3(pH+E/RT)]$$

• 공업화학
• /
• 제34권6호
• /
• pp.619-625
• /
• 2023

본 연구는 극초음속 비행체의 열부하로 인한 문제를 해결하기 위해 촉매의 Si/Al 비 최적화 및 니켈 이온교환을 통해 탄화수소 분해반응(흡열반응)의 성능 증진에 관한 연구를 수행하였다. 4 MPa, 550 ℃ 조건에서, Si/Al 비 최적화 및 니켈 이온교환으로 제조된 촉매는 열분해 대비 흡열성능이 약 10% 개선되었음을 확인하였다. 활성 변화에 대한 영향 인자를 확인하기 위하여 FT-IR, NH₃-TPD 분석을 수행하였으며, HZSM-5 촉매의 Si/Al 비가 산점 발달 및 촉매 활성에 밀접한 상관성이 있음을 관찰하였다. 또한, 니켈이 첨가된 촉매의 탄소 침적 억제 특성을 관찰하기 위해 TGA, O₂-TPO 분석을 수행하였다.

• 한국화재소방학회논문지
• /
• 제26권1호
• /
• pp.89-95
• /
• 2012

본 연구에서는 목분-HDPE 복합체를 모듈라 회전 이축압출기를 이용하여 제조하여 연소성 및 열적특성을 평가하기 위하여 콘칼로리미터 실험및 열중량 분석실험을 실시하였다. 그리고 복합체의 난연성능 향상을 위하여 난연제(3종)를 첨가한 복합체의 화재성능을 평가하였다. 콘칼로리미터 실험 결과 난연제를 첨가하지 않은 복합체의 열방출률이 가장 높았으며 최대 열방출률 값은 $446.6kW/m^2$, 평균 열방출률 값은 $185.5kW/m^2$으로 가장 높게 나타났다. 열중량 분석 결과 난연제 첨가한 복합체들의 열분해가 먼저 시작되고 열 안정성을 향상시켰다.

• 한국환경과학회지
• /
• 제26권11호
• /
• pp.1201-1208
• /
• 2017

Oxidative degradation of chlorinated ethenes was carried out using heat-activated persulfate. The activation rate of persulfate was dependent on the temperature and the activation reaction rate could be explained based on the Arrhenius equation. The activation energy of persulfate was 19.3 kcal/mol under the assumption that the reaction between the sulfate radical and tricholoroethene (TCE) is very fast. Activation could be achieved at a moderate temperature, so that the adverse effects due to high temperature in the soil environment were mitigated. The reaction rate of TCE was directly proportional to the concentration of persulfate, indicating that the remediation rate can be controlled by the concentration of the injected persulfate. The solution was acidized after the oxidation, and this was dependent on the oxidation temperature. The consumption rate of persulfate was high in the presence of the target organic, but the self-decomposition rate became very low as the target was completely removed.

• Journal of Welding and Joining
• /
• 제18권6호
• /
• pp.48-54
• /
• 2000

The corrosion properties of Ni-Cr-W-Mo-B alloy sprayed by the high velocity oxy-fuel spraying (HVOF) was studied as a function of heat treatment by using both potentiodynamic polarization and immersion tests in the H₂SO₄ solution. The mechanical property was also evaluated by a microhardness tester. Microstructural characteristics of te as-sprayed and annealed coatings at 550, 750 and 950℃ have been analyzed by means of OM, XRD, SEM and TEM. The results showed that the corrosion resistance was improved by increasing the annealing temperature. As-sprayed coating had metastable and heterogeneous phases such as amorphous, nanocrystalline and very refined grain and precipitates, which induced a localized corrosion. The localized corrosion occurred preferentially at the unmelted particles which were composed of Ni matrix and Cr, W and Mo riched phase segregated in the boundaries. As annealing temperature was increased, the microstructure had shown some changes - reduction of porosity and s[plat boundary decomposition and crystallization of amorphous/nanocrystalline phases, grain coarsening,, formation and growth of precipitates such as {TEX}$M_{23}C_{6}${/TEX} and {TEX}$M_{7}C_{3}${/TEX}. In addition, the compositional difference between matrix and boundary phases gradually disappeared, which changed the corrosion type from localized corrosion to general corrosion and thus enhanced corrosion resistance.

• 한국추진공학회지
• /
• 제22권4호
• /
• pp.55-60
• /
• 2018

열적 특성은 에너지 물질 분야에서 중요한 특성 중 하나로, 분해열을 방출하기 때문에, 열적 특성 분석에 DSC(Differential Scanning Calorimetry)가 자주 사용된다. 그러나 DSC 측정의 경우, 용융과 같은 열역학적 변화가 kinetics 분석에 방해를 끼친다. 이번 연구에서는 이 문제점을 해결하는 방안으로, 등온 조건으로 한 DSC 기초 데이터와 g 단위로 측정하는 ARC(Accelerating Rate Calorimetry)의 데이터를 이용하여 AKTS(Advanced Kinetics and Technology Solutions) thermokinetic 프로그램을 이용하여 열적 노화 특성을 예측, 비교한다.