• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.1
• /
• pp.51-56
• /
• 1982

The thermal degradation of 0.05M glucose-arginine model system was occurred during heat treatment for 0$\sim$7 hours at $60{\sim}120^{\circ}C$. and the melanoid in formation was investigated as a function of temperature. The decomposition reaction of glucose and arginine, as well as the reaction of melanoidin formation, followed first-order kinetics, except the reaction at $120^{\circ}C$. and the rate constants ($hr^{-1}\times 10^3$) of those reactions were ranged from 14.20 to 837. 10. Temperature dependence of the rate constants was characterized by the Arrhenius equation, except the reaction at $120^{\circ}C$. The ranges of activation energy and $Q_{10}$ values were 12.122$\sim$18.142 kcal/mole and 1.65$\sim$2.12, respectively.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.468-474
• /
• 1993

A dehydrating sheet comprises polymeric water absorber. which are packed in a semipermeable cellophane film bag allowing selective permeation of water. This sheet dehydration is quite different from conventional drying method such as sun drying, hot-air blast drying and cold air blast drying in a sense that samples are dried without heat treatment. As a part of the studies to develope a new processing method for effective utilization of dark muscle fishes, the preparation of a good quality salted and semi-dried mackerel by the dehydrating sheet was attempted. The dehydration time for preparation of a salted and semi-dried mackerels containing approximately equal moisture content were revealed $180{\sim}510min$ in conventional drying method and $90{\sim}160min$ in this sheet dehydration, respectively. The moisture and histamine contents of those salted and semi-dried mackerels were $59.4{\sim}62.4%$ and $2.5{\sim}3.6 mg/100g$, respectively. The changes in peroxide value, fatty acid composition, brown pigment formation, myofibrillar protein solubility and Ca-ATPase activity during processing of the salted and semi-dried mackerel prepared by the sheet dehydration were more lower than those of products prepared by conventional drying methods. Therefore, these result showed that the quality of a salted and semi-dried mackerel prepared by the sheet dehydration was imperial to that of those products by conventional drying method.

• Journal of fish pathology
• /
• v.22 no.3
• /
• pp.293-303
• /
• 2009

Effects of stress on the low salinity stress were examined in the pacific abalone Haliotis discus discus. Changes in survival rate, hemolymph count, antioxidant enzyme activities (catalase: CAT and superoxide dismutase: SOD), respiratory burst activity, phenoloxidase activity, lysozyme activity and expression of heat shock protein 70 (HSP70) mRNA were measured 0, 3, 6, 12, 24 or 48hours after low salinity treatment with 25, 30, 33 and 35 psu. Survival rates of pacific abalone were 100% at 33 and 35 psu, but 93 and 97% at 25 and 30 psu for 48 hours, respectively. Hemolymph counts decreased in the time elapsed-dependent way at all of the experimental groups. At low salinity, 25 and 30 psu, SOD and CAT activity increased compared to the experimental group of 33 psu. Moreover, respiratory burst activities of the pacific abalone seemed to have no effect on low salinity stress at any experimental group. However, phenoloxidase activity is an important component of the defence against pathogen that was decreased in a reduction of salinity dependent way. Lysozyme activity also immediately reduced at 25 psu experimental group for 48 h. The HSP70 mRNA was weakly expressed at 33 psu, but strongly detectable at 25 psu experimental group. The HSP 70 mRNA expression in gill increased in the time elapsed-dependent way at 25 psu experimental group and then recovered at 48 h. These results suggest that low salinity stress give rise to inhibitory action of immune system as a result of the decrease of phenoloxidase and lysozyme activity in the pacific abalone, especially.

• Journal of Plant Biotechnology
• /
• v.30 no.4
• /
• pp.405-410
• /
• 2003

Environmental stress is the major limiting factor in plant productivity. In order to evaluate the stress tolerance of potato plants, leaf discs of two potato cultivars, Atlantic and Superior, were subjected to various stress conditions of high temperature, methyl viologen, H2O2, or $H_2O$$_2$. When potato leaf discs were exposed to high temperature at 37$^{\circ}C$ for 84 hr, Atlantic plants, a cultivar with high sensitivity to heat stress, showed about 20％ higher membrane damage than Superior plants. When exposed to 2$\mu$M methyl violgen (MV), a superoxide generating non-selective herbicide, for 36 hr, Atlantic plants also showed about 38％ higher membrane damage than Superior plants, and were more susceptible up to 10$\mu$M MV concentration tested. On treatment with 0.75M NaCl, Atlantic plants also had about 45％ less chlorophyll contents in leaf discs than Superior plants. There was, however, no difference in chlorophyll content of two cultivars at higher NaCl concentrations. The effect of $H_2O$$_2$ on the two cultivars was mixed. At low $H_2O$$_2$ concentration (25 mM) , Superior plants were more susceptible to $H_2O$$_2$stress after 36 hr. However, at high $H_2O$$_2$ concentration (100 mM), Atlantic plants exhibited higher susceptibility after 36 hr. The results indicate that in vitro leaf discs reflecting the whole plants in this study will be useful for selection and characterization of elite transgenic potato plants with enhanced tolerance to environmental stress.

• Korean Journal of Microbiology
• /
• v.51 no.2
• /
• pp.126-132
• /
• 2015

Three different methods (simple washing of plastic and pulp sample, washing after direct heating of the diapers, and the heating after washing of plastic and pulp sample) were carried out to decrease total coliforms and heterotrophic plate count (HPC) in the diaper's plastic and pulp. Plastic and pulp samples were obtained from diaper by treatment with 10% $CaCl_2$ and 4% sea salt water, dilution with 1,000 ml tap water, and draining by using sieves. Three times washing was the most appropriate for the reduction of microorganisms in plastic and pulp. By three times washing, the number of total coliforms in the plastic and pulp samples showed 92.8% and 99.8% of decrease, respectively, and the number of HPC showed 97.3% of decrease in the plastic and 98.5% of decrease in the pulp. The washing after direct heating of the fecal contaminated diapers was not effective because HPC in the plastic and pulp samples were still detected about 2-3 log CFU/g in the plastic and 1-2 log CFU/g in the pulp, respectively, even after heating at $60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$ for 12 h. Meanwhile, total coliforms and HPC were completely sterilized at $80^{\circ}C$ for 4 h by heating after washing of plastic and pulp samples, suggesting that this method was the most appropriate method for the reduction of microorganisms in plastic and pulp obtained from fecal contaminated diapers.

• Applied Biological Chemistry
• /
• v.24 no.1
• /
• pp.50-58
• /
• 1981

The influence of high temperature storage on the chemical composition and color intensity of the concentrated red ginseng extract(RGE) was investigated. The concentrated RGE was prepared by extraction of red ginseng tails with water and concentrated under reduced pressure. Changes in free sugars, saponin patterns and brown color intensity were measured during 96 hours of heat treatment at various temperature. A decrease in the contents of glucose, fructose and sucrose was resulted as the brown color intensity increased during the storage. The sugar contents and color intensity showed rapid initial change followed by slowing down at higher temperature. A significant relationship was found between sugar content and browning rate. The saponin pattern measured by high performance liquid chromatography, particularly in the region of protopanaxtriol, was also affected significantly. The peak heights of ginsenoside -Re and $-Rg_1$ were decreased while those of ginsenoside $-Rg_2$ and -Rh group were increased.

• Korean Journal of Ecology and Environment
• /
• v.50 no.1
• /
• pp.29-45
• /
• 2017

This study explored spatiotemporal variability of water quality in correspondence with hydro-meteorological factors in the four stations of Euiam Reservoir located in the upstream region of the North-Han River from May 2012 to December 2015. Seasonal effect was apparent in the variation of water temperature, DO, electric conductivity and TSS during the study period. Stratification in the water column was observed in the near dam site every year and vanished between August and October. Increase of nitrogen nutrients was observed when inflowing discharge was low, while phosphorus increase was distinct both during the early season with increase of inflowing discharge and the period of severe draught persistent. Duration persisting high concentration of Chl-a (>$25mg\;m^{-3}$: the eutrophic status criterion, OECD, 1982) was 1~2 months of the whole year in 2014~2015, while it was almost 4 months in 2013. Water quality of Euiam Reservoir appeared to be affected basically by geomorphology and source of pollutants, such as longitudinally linked instream islands and Aggregate Island, inflowing urban stream, and wastewater treatment plant discharge. While inflowing discharge from the dams upstream and outflow pattern causing water level change seem to largely govern the variability of water quality in this particular system. In the process of spatiotemporal water quality change, factors related to climate (e.g. flood, typhoon, abruptly high rainfall, scorching heat of summer), hydrology (amount of flow and water level) might be attributed to water pulse, dilution, backflow, uptake, and sedimentation. This study showed that change of water quality in Euiam Reservoir was very dynamic and suggested that its effect could be delivered to downstream (Cheongpyeong and Paldang Reservoirs) through year-round discharge for hydropower generation.

• Journal of Life Science
• /
• v.15 no.3 s.70
• /
• pp.439-446
• /
• 2005

Ferritin is known to be the principle iron-storage protein in a wide variety of rganisms. The electro­phoretic mobility and immunological cross-reactivity of dog splenic ferritin were compared with those of horse, bovine, and pig splenic ferritin after isolation using heat treatment, salting out, column chromatography, and ultrafiltration. These isolation methods allowed the recovery of $\~84{\mu}g$ of the ferritin per g of spleen. The iron content in the dog ferritin was $22.7\%$, which appeared to be higher than those in the other mammalian ferritins tested. The electrophoretic mobility of the dog ferritin under nondenaturing conditions was similar to its bovine counterpart, whereas it was more identical to pig and horse ferritins on an SDS-polyacrylamide gel. The molecular weight of the dog ferritin subunit was 19.5 kDa on an SDS-polyacrylarnide gel, and the subunit was unable to bind with iron. The polyclonal anti-dog ferritin raised in rats was able to cross-react with the pig, bovine, and horse ferritins, upon Ouchterlony double immunodiffusiion. A Western blot analysis also revealed that the anti-dog ferritin, which specifically bound with the dog ferritin subunit, could also recognize the horse, bovine, and pig ferritin subunits and the maximum cross-reactivity was exhibited with the pig ferritin subunit, indicating that the dog ferritin is immunochemically more similar to the pig ferritin than its other mammalian counterparts. Accordingly, these results elucidate the biochemical and immunochemical characteristics of dog ferritin that might have a potential to be applied as an oral iron supplement to treat iron deficiency anemia.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Microbiology and Biotechnology Letters
• /
• v.26 no.2
• /
• pp.122-129
• /
• 1998

It were reported that antifungal mechanism of Enterobacter cloacae is a volatile ammonia that produced by the strain in soil, and the production of ammonia is related to the bacterial urease activity. A powerful bacterium SH14 against soil-borne pathogen Fusarium solani, which cause root rot of many important crops, was selected from a ginseng pathogen suppressive soil. The strain SH14 was identified as Bacillus subtilis by cultural, biochemical, morphological method, and $API^{circledR}$ test. From several in vitro tests, the antifungal substance that is produced from B. subtilis SH14 was revealed as heat-stable and low-molecular weight antibiotic substance. In order to construct the multifunctional biocontrol agent, the urease gene of Bacillus pasteurii which can produce pathogenes-suppressive ammonia transferred into antifungal bacterium. First, a partial BamH I digestion fragment of plasmid pBU11 containing the alkalophilic B. pasteurii l1859 urease gene was inserted into the BamH I site of pEB203 and expressed in Escherichia coli JM109. The recombinant plasmid was designated as pGU366. The plasmid pGU366 containing urease gene was introduced into the B. subtilis SH14 with PEG-induced protoplast transformation (PIP) method. The urease gene was very stably expressed in the transformant of B. subtilis SH14. Also, the optimal conditions for transformation were established and the highest transformation frequency was obtained by treatment of lysozyme for 90 min, and then addition of 1.5 ${mu}g$/ml DNA and 40% PEG4000. From the in vitro antifungal test against F. solani, antifungal activity of B. subtilis SH14(pGu366) containing urease gene was much higher than that of the host strain. Genetical development of B. subtilis SH14 by transfer of urease gene can be responsible for enhanced biocontrol efficacy with its antibiotic action.