• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.12-19
• /
• 2017

Yellow-hearted pine (YHP; Pinus densiflora for. erecta Uyeki) is one of the Red pine species and has extremely narrow growth ring and high ratio of heartwood growing in Korea. It has been used for valuable wooden constructions as palace and temple for royal family since the Joseon Dynasty period. However, scientific information on the wood properties of YHP is still very lacking. This study was carried out to investigate natural durability of YHP to fungi and termites attack. Examination of anti-fungal and anti-termite properties of YHP was performed at indoor condition using brown-rot fungi (Fomitopsis palustris), white-rot fungi (Trametes versicolor), and termite (Reticulitermes speratus). The results showed that weight loss of the heartwood in YHP after fungi and termite test was much lower than those of the sapwood in YHP. Furthermore, the highest mortality of termite was obtained from the heartwood of YHP. Consequently, it is clearly revealed that the heartwood of YHP has excellent durability against brown- and white-rot fungi and termite.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.44-51
• /
• 2008

In this study, the effects of carbonization temperature on the physico-chemical properties of Korean red-pine wood (Pinus densiflora S. et Z.) powder charcoal are studied by elemental analysis, nitrogen adsorption-desorption and SEM techniques. The surface structure and physico-chemical properties of the wood charcoal greatly depend on the carbonization temperature and their temperature dependences for sapwood (swd) and heartwood (hwd) are qualitatively analogous. Because of the differences in characteristics such as hardness and composition between heartwood and sapwood, charcoals from heartwood have larger specific surface area and smaller average pore diameter than that from sapwood. Because the decomposition reaction mostly proceeds in the precarbonization stage, the charcoal produced in this stage mainly consists of carbon. The second carbonization reaction is insignificant but still proceeds up to $700^{\circ}C$, and the specific surface area continuously increases. Above $800^{\circ}C$, the surface area is reduced by the pore-filling and narrowing effects and especially above $900^{\circ}C$, new carbon phase with hexagonal column rooted into the pore is formed. The nitrogen adsorption-desorption isotherm of the charcoal is classified as type I and its hysteresis loop was as type H4.

• Proceedings of the PSK Conference
• /
• 2000.04a
• /
• pp.188.2-189
• /
• 2000

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.2
• /
• pp.61-70
• /
• 2012

In this study the effect of heartwood-coating (HCO), vapor-dam (VD), bark-remaing (BR) and bark-remaining- coating (BRC) treatments were evaluated during air circulating oven-drying of hollowed round-post of Korean red pine. Hollowed round-post could be dried from the green condition to approximately 6% MC within 84 to 156 hours for the UC, HCO and VD specimens and it took 72 to 240 hours to about 8% MC, which is recommended as the indoor in-use MC. The temperatures in the hole of the Control (UC) and HCO specimens constantly showed a higher-leveled distribution pattern than those inside wood. The vapor pressure in the hole of the UC, HCO and BR specimens was higher than that inside wood and showed difference as highest value of about 20 mbar. The surface checks of all specimens were mild and were observed in increasing order of BRC, BR, UC, VD and HCO specimens.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.1
• /
• pp.64-70
• /
• 1991

In order ot obtain the information on wood quality of the Populus nigra $\times$ maximowiczii the distributions of crystalliferous substancess, ty loses and tension woods were examined through light microscopy or scanning electron microscopy. 1. The crystalliferous subtance, presumably calcium oxalate. partially occurred in vessel elements of heartwood, and sporadically in ray parenchyma, but not in the wood fibers The types of crystalliferous subtances were mainly crystal sand, $2-3{\mu}m$ in diameter. 2. The tyloses arranged in a ladder-like series were sporadically formed in the vessel elements of heartwood. 3. Although the woods were cut from the straightly grown stem without any evident disorientation with respect to gravitational axis, single or group of gelatinous fibers were irregularly distributed among normal wood fibers.

• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.56-61
• /
• 2014

Macroscopic and microscopic characteristics of Yellow-hearted pine and Red pine were investigated. Wood color, annual ring width and latewood percentage were observed by the naked eye. Anatomical properties as the structure of three sections and cell dimensions were examined by an optical microscopy. As a result, the color of bark in Yellow-hearted pine was Reddish-grey, and Red pine showed brown or gray. The color of heartwood and sapwood in Yellow-hearted pine was deep-yellow to brown and creamy-white. And the color of heartwood and sapwood in Red pine was light-brown and light-yellow. The annual ring width of Yellow-hearted pine was narrower than that of Red pine, and the latewood percentage of Yellow-hearted pine was a little higher than that of Red pine. There was no significant difference in the anatomical characteristics between Yellow-hearted pine and Red pine.

• Journal of the Korea Furniture Society
• /
• v.24 no.4
• /
• pp.345-349
• /
• 2013

Yellow poplar is well known commercial hardwood species in the world because of its availability, rapid growth, large size, excellent form, early natural pruning, and the good working quality of the wood. Therefore, yellow poplar (Liriodendron tulipifera L.) has been adopted in South Korea for decades ago, and its cultivating the saplings and silvicultural system have been studied. However, yellow poplar is still embroiled in controversy for utilization of use and worth. This species has not only advantages such as lower weight, light color, and higher machinability and bending processing, but also has disadvantages which are bad smell and different colors on heartwood and sapwood. In this study, the objective was that use of yellow poplar board as furniture materials by drying and painting process. Thirty years old yellow poplar was cut and dried for 7 days by high-frequency dryness. Adjustment of color tone to walnut color was conducted with multiple colorants and various number of spread times. Uniform color of yellow poplar on heartwood and sapwood was accomplished by applying 1 time stain (green), 2 times transparent primer, 1 time middle-painting (walnut), and 2 times top-painting (walnut) in sequentially. The painted yellow poplar board was used to manufacture table and dressing table. During the furniture manufacture process, no critical issues were occurred on part of jointing and painting. This painting method may be useful data for future use of yellow poplar as furniture materials.

• Korean Journal of Pharmacognosy
• /
• v.26 no.1
• /
• pp.1-7
• /
• 1995

The bark of Ulmus parvifolia Jacq. (Ulmaceae) has been used for the treatment of gonorhea, edema, scabies and eczema marginatum. Previous investigations conducted with the heartwood and leaves have demonstrated it to contain sesquiterpenes as well as fat acids from the heartwood and flavonol glycosides from leaves. However, no phytochemical work has been done on the bark parts of this plant. Investigation of the phytochemical constituents in the barks of U. parvifolia has resulted in the isolation of sterols, sterol glucoside and a catechin glycoside, $(+)-catechin\;7-O-{\alpha}-{_L}-rhamnopyranoside$, all of which were isolated for the first time from this plant. Sterols were consisted of the three components, ${\beta}-sitosterol$, stigmasterol and campesterol in a ratio of 92.1:4.1:3.8, and sterol glucoside was identified as ${\beta}-sitosterol\;3-O-{\beta}-{_D}-glucoside$. The structure of the catechin $7-O-{\alpha}-{_L}-rhamnoside$ was established primarily by analysis of $^1H-and$ COSY-45 NMR, HMQC and HMBC and EI mass spectra of the heptaacetate. Especially, HMBC spectrum provides effective way for the determination of the point of attachment of the rhamnosyl group to catechin moiety.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.1-7
• /
• 1995

The crystal transformation from cellulose I to cellulose II during alkaline swelling of waste wood, which has been used for cultivating oak mushroom(Cortinellus edodes (Berk.) Ito et Imai), was investigated and compared to that of normal wood by a series of X-ray diffraction analysis. When the sapwood of cultivated wood was treated with 20% NaOH solution for 2 hours, the cellulose I can be easily transformed into Na-cellulose I than normal wood or heartwood of cultivated wood. Certainly the formation of Na-cellulose in wood is proportional to alkali swelling duration, and the formation of cultivated sapwood was faster than that of the other woods. Cellulose I in the sapwood of cultivated wood was easily transformed into cellulose II during mercerization, but the sapwood of normal wood and the heartwood of cultivated wood hardly converted to cellulose II. Namely, most of Na-cellulose I in normal wood can be reconverted to cellulose I in the process of washing and drying. Therefore, it can be concluded from this study that in cell wall lignin and hemicellulose can prevent the alkaline swelling of cellulose in wood and the transformation from cellulose I to cellulose II as well.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.61-69
• /
• 1988

Recently the automization of wood manufacturing and the development of CNC machine tools becomes the center of interest. Cutting mechanism, tool wear and the roughness of machined surface have been studied. In the studies about wood for special uses, concrete data of cutting is desired. While Pinus densiflora is characterized that heartwood develops as age increases, Chunyang District has the characteristic of strength, red color, relatively regular chap and high heartwood - percentage. But there is no data about cutting this wood, Chunyang District. In this study face milling by sintered carbide tool was excuted to Chunyang District. Cutting force, Surface roughness and states were investigated with regard to cutting speed. Example results were as follows; 1) Mean cutting resistance against lateral component force and longitudinal component force decreased rapidly up to cutting speed of 155 m/min, and remains constant above this speed. 2) The surface roughness of cutting surface lowered as cutting speed increased, regardless of fiber formation. Radial rougness of fiber is larger than lineal surface roughness. 3) Increase in Cutting speed made machining mark restrained. Down-milling showed larger marks than up-milling.