• 환경위생공학
• /
• 제18권4호
• /
• pp.36-44
• /
• 2003

The cement-based system among S/S(Solidification/Stabilization) is widely used to treat hazardous wastes. In this study, tannery sludge was solidified to evaluate the stabilization effects of using admixtures in the cement-based S/S. Fly ash as substitute also used to increase the strength of the S/S of hazardous waste. The compressive strength measurement and leaching experiment of chromium metal of solidified mortar were carried out to compare and evaluate the physical and chemical characteristics of solidified hazardous waste sludge. From the result of this study, there was increased of compressive strength by using AEW-3(early-hardening AE water reducing agent), and leaching concentration of chromium became low enough to satisfy the regulatory criteria. The successful solidification for the organic contaminant and heavy metal in hazardous waste should enable to treat by cement-based system using early-hardening AE water reducing admixture and fly ash as substituted cement.

• 한국식품위생안전성학회지
• /
• 제23권3호
• /
• pp.276-283
• /
• 2008

국내 외 선행연구결과에 의한 어린이 출생 전 후 건강에 영향을 미칠 수 있는 주요 유해물질은 inorganic arsenic, BPA, 2,4-D, dichlorvos, methylmercury, PCBs, pesticide, phthalate, PFOA/PFOS, vinyl chloride 등으로서 국내에서도 이들을 포함한 확인 연구가 수행되어져야 할 것이다. 또한 어린이들의 행동발달과 연관된 생활환경에서의 다양한 인체노출이 확인됨에 따라 탁아소, 유치원과 같은 경우 어린이 활동공간을 대상으로 환경모니터링 및 위해관리활동도 병행되어야 할 것이다. 또한 어린이 건강에 영향을 미치는 유해물질을 중심으로 독성평가, 인체영향연구, 환경 및 인체모니터링과 위해평가를 수행하므로 유해물질의 원인-상관관계를 확인하고 사실자료에 근거한 관리정책을 반영하는 것이 바람직하다.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2003년도 춘계학술대회 논문집
• /
• pp.31-34
• /
• 2003

The monitoring of genotoxic effect or oxidative DNA damage in workers exposed to hazardous materials is increasingly applied for hazard identification or risk assessment purposes in workplaces. The current generation of biomarkers has the potential to allow for the earlier detection of occupational disease, for the reduction of misclassification of exposure and outcome. (omitted)

• 한국대기환경학회지
• /
• 제29권5호
• /
• pp.536-544
• /
• 2013

Even a small amount of hazardous air pollutants could have a harmful influence upon human beings, animals and plants. Hazardous air pollutants have the properties of toxicity, canceration and organism accumulation. They include heavy metals, volatile organic compounds, polycyclic aromatic hydrocarbons, dioxin, etc. The Clean Air Conservation Act has defined specific hazardous air pollutants and designated 35 pollutants, distinguishing them from common air pollutants for special control. This study investigates the history of the controls of specific hazardous air pollutants with reference to some relevant laws and regulations in Korea. It investigates the regulations at the permission stage, such as the restrictions on installation of emission facilities, the permission and reporting of installation of emission facilities, and the regulations at the operation stage, such as maintaining permissible emission levels, installation of measuring devices, dues for emission, self-measurement and securing environmental engineers. The current regulatory management is not so satisfactory in regards to the serious effects of specific hazardous air pollutants upon the human body. An advanced new concept, like the maximum available control technology in US, the facilities management standards, which will soon take effect, will be able to lessen the emissions of fugitive hazardous air pollutants. In addition, this study discusses some possible stricter controls on the emission facilities of specific hazardous air pollutants and proposes some measures to maintain and supplement the current systems.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.625-629
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS (Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 춘계학술대회
• /
• pp.225-239
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS(Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• 대한안전경영과학회지
• /
• 제2권1호
• /
• pp.141-159
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS(Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.175-181
• /
• 2001

In compliance with the Industrial Safely and Health Acts, the owners/users have performed self-inspection at regular intervals to secure safety in the use of hazardous machinery, equipment and facilities However, securing safety, which is the goal of self-inspection, has not been thoroughly understood in most small businesses and factories. The objective of this research is to analyze the importance and effects of self-inspection in preventing accidents in businesses and factories that use hazardous machinery and facilities. The result shows that self-inspection has made a good contribution to the prevention of accidents. Most businesses and factories that responded the survey answered they have improved safety in the use of machinery and facilities through self-inspection, though the ways of self-inspection were not all the same. However, the result also reveals that there are rooms for further improvement in the areas of self-inspection intervals, self-inspection methods and the selection of self-inspection objects. This improvement is necessary to improve the effect of self-inspection and to minimize regulations of the government on business activities.

• Tuberculosis and Respiratory Diseases
• /
• 제86권1호
• /
• pp.23-32
• /
• 2023

Everyone is aware that air and environmental pollutants are harmful to health. Among them, indoor air quality directly affects physical health, such as respiratory rather than outdoor air. However, studies that have examined the correlation between environmental and health information have been conducted with public data targeting large cohorts, and studies with real-time data analysis are insufficient. Therefore, this research explores the research with an indoor air quality monitoring (AQM) system based on developing environmental detection sensors and the internet of things to collect, monitor, and analyze environmental and health data from various data sources in real-time. It explores the usage of wearable devices for health monitoring systems. In addition, the availability of big data and artificial intelligence analysis and prediction has increased, investigating algorithmic studies for accurate prediction of hazardous environments and health impacts. Regarding health effects, techniques to prevent respiratory and related diseases were reviewed.

• Journal of Pharmaceutical Investigation
• /
• 제37권2호
• /
• pp.119-126
• /
• 2007

Tablet splitting is used in pharmacy practice to adjust the dose to be administered. However, it also causes several problems such as undesirable effect for sustained release or enteric-coated dosage form, inaccuracy of dose, and pharmacist's safety by splitting hazardous drugs. This study investigated the current status of oral dosage form splitting for patients older than 19 years by analyzing Korea National Health Insurance Claims Database. Out of oral solid drugs prescribed (N=1,486,584) 9.8% of them included tablets (or capsules) split. There were some splitting cases even in sustained release (4.9%), enteric-coated forms (1.3%) and hazardous drugs (2.7%) that were selected by NIOSH (The National Institute for Occupational Safety and Health). The most frequently split drugs were antihistamines, neuropsychotics and steroids. In case of digoxin and warfarin, unit doses in a domestic market were not diverse compared to foreign markets. Guidelines for splitting oral solid dosage forms, approval of diverse doses and conducting dose-response studies for the commonly splitting ingredients on Korean people are needed for the saff and effective use of oral solid drugs.