• 제목/요약/키워드: health hazard

검색결과 1,087건 처리시간 0.025초

Hazard Levels of Cooking Fumes in Republic of Korea Schools

  • Lee, Iu-Jin;Lee, Sang-Gil;Choi, Bo-Hwa;Seo, Hoe-Kyeong;Choi, Ji-Hyung
    • Safety and Health at Work
    • /
    • 제13권2호
    • /
    • pp.227-234
    • /
    • 2022
  • Background and Purpose: In 2021, lung cancer in school food workers was first recognized as an occupational cancer. The classification of the carcinogenicity of cooking fumes by International Agency for Research on Cancer (IARC) was based on Chinese epidemiological data. This study aimed to determine the hazard levels of school cooking fumes in Korea. Materials and Methods: Based on public school cafeterias in one area, 25 locations were selected for the survey according to the number per school type, ventilation states, and environmental pre-assessments of cafeterias. Two inside cooking areas using a heat source and one outside cooking area were selected as control measurement points. Measurements of CO, CO2, polycyclic aromatic hydrocarbons (PAHs), and total volatile organic compounds (TVOCs), including benzene, formaldehyde, and particulate matter (PM10, PM2.5, PM1, respectively), were taken. The concentrations and patterns of each substance in the kitchens were compared with the outdoor air quality. Result: Known carcinogens, such as the concentrations of PAHs, formaldehyde, TVOC (benzene), and particulate matter in school cooking fumes, were all detected at similar or slightly higher levels than those found outside. Additionally, substances were detected at relatively low concentrations compared to the Chinese cooking fumes reported in the literature. However, the short-term exposure to high concentrations of CO (or composite exposure with CO2) and PM2.5 in this study were shown. Conclusion: The school cooking fumes in South Korea was a relatively less harmful than Chinese cooking fumes, however short-term, high exposure of toxic substances can cause a critical health effect.

한국 장년임금근로자들의 퇴직: 사업체 규모별 위험모형분석 (Retirement of Older Wage Workers in Korea: Hazard Model Analysis by Firm Size)

  • 이철희;이에스더
    • 노동경제논집
    • /
    • 제38권1호
    • /
    • pp.31-65
    • /
    • 2015
  • 이 논문은 장년임금근로자들이 기존 일자리를 그만두는 이유와 퇴직위험의 결정요인을 분석하였다. 주된 결과는 다음과 같다. 첫째, 공식적인 정년으로 일자리를 떠나는 장년근로자는 비교적 소수이며 대부분이 대기업 남성근로자들이다. 둘째, 일정수준을 넘는 고임금은 장년근로자의 퇴직위험을 높이며, 이 효과는 주로 대기업 남성근로자에게서 발견된다. 셋째, 관행적인 강제 퇴직은 장년여성근로자의 퇴직을 초래하는 중요한 요인이다. 넷째, 건강의 악화는 장년근로자 퇴직의 가장 중요한 이유로 조사되었으며 이러한 경향은 특히 여성근로자와 소규모사업체 근로자에게 강하게 나타난다. 끝으로, 적정한 근로시간과 높은 근로유연성은 장년근로자의 퇴직위험을 낮추는 요인이다. 논문은 분석결과가 장년고용정책에 대해 갖는 함의를 논의하였다.

  • PDF

축열조 공사의 위험분석지수 비교에 관한 연구 (A Study on the Comparison of the Indices of Hazard Analyses for the Construction of Heat Accumulator)

  • 이상욱;맹인영;이영섭
    • 한국안전학회지
    • /
    • 제29권5호
    • /
    • pp.166-171
    • /
    • 2014
  • This study is conducted to compare three methods of hazard analyses and to propose the control for the accidents arising under construction of heat accumulator of group energy projects(co-generation plants). The analysis of fatal accidents and the Analytic Hierarchical Process(AHP) using by the questionnaire survey for the workers engaged in the construction of heat accumulator and the quantitative questionnaire survey of expert group has been carried out. In order to analyze the fatal accidents, the 115 cases of accidents from 2001 to 2012 published by Korean Occupational Safety and Health Agency(KOSHA) and workers suffered from industrial accidents are collected and analyzed. The AHP is applied and analyzed for 66 persons of the construction site managers, safety engineers and construction engineers and the questionnaire survey of expert group is carried out and analyzed for the 51 persons of contractors and construction inspectors. The analyses of the types of accidents and the jobs of the suffered workers and the hazardous construction processes which are occurred accidents frequently are shown. The results of the analysis of fatal accidents and the AHP as well as the questionnaire of expert group are shown similar results.

HAZARD EVALUATION OF WORK TYPES FOR BUILDING CONSTRUCTION

  • Seong-Seok Go;Hyuk Song;Han-Min Lee;Hyun-Chul Lee
    • 국제학술발표논문집
    • /
    • The 1th International Conference on Construction Engineering and Project Management
    • /
    • pp.786-790
    • /
    • 2005
  • As the scale of building construction is larger and more complex and the adaptation of new technology is increasing, the tendency of the risk serious accident cases is increasing now. Especially, the accident rate is below 10% at the building construction workers in Korea but among the total industrial accidents it exceeded by 35%. To prevent a construction accident, it is essential that not only to have a through grasp of the characteristic of safety problem but also to establish of efficient safety counter plan are required. According to the type and situation of building construction, the acquirement of necessary information is useful to prevent the hazard of work and establish the counter plan. Among the safety information it is a thing of especial importance that to estimate the hazard of work types for building construction to prepare the counter plan of safety. This study will analyze all of the1600 accidents of the building construction works from the data of KOSHA(Korea Occupational Safety &Health Agency) which were collected during 11 years(1992~2002) data relating to serious accidents of the building construction works, and suggest the counter plan according to the each work type in building construction works.

  • PDF

Estimation of Hazard Function and its Associated Factors in Gastric Cancer Patients using Wavelet and Kernel Smoothing Methods

  • Ahmadi, Azadeh;Roudbari, Masoud;Gohari, Mahmood Reza;Hosseini, Bistoon
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제13권11호
    • /
    • pp.5643-5646
    • /
    • 2012
  • Background and Objectives: Increase of mortality rates of gastric cancer in Iran and the world in recent years reveal necessity of studies on this disease. Here, hazard function for gastric cancer patients was estimated using Wavelet and Kernel methods and some related factors were assessed. Materials and Methods: Ninety-five gastric cancer patients in Fayazbakhsh Hospital between 1996 and 2003 were studied. The effects of age of patients, gender, stage of disease and treatment method on patient's lifetime were assessed. For data analyses, survival analyses using Wavelet method and Log-rank test in R software were used. Results: Nearly 25.3% of patients were female. Fourteen percent had surgery treatment and the rest had treatment without surgery. Three fourths died and the rest were censored. Almost 9.5% of patients were in early stages of the disease, 53.7% in locally advance stage and 36.8% in metastatic stage. Hazard function estimation with the wavelet method showed significant difference for stages of disease (P<0.001) and did not reveal any significant difference for age, gender and treatment method. Conclusion: Only stage of disease had effects on hazard and most patients were diagnosed in late stages of disease, which is possibly one of the most reasons for high hazard rate and low survival. Therefore, it seems to be necessary a public education about symptoms of disease by media and regular tests and screening for early diagnosis.

돼지피부를 사용한 방사선 체외 장해모델 구현연구 (Implementation of Radiation Damage in Vitro Model using Swine Skin)

  • 정홍문;원도연;정동경;정재은
    • 한국방사선학회논문지
    • /
    • 제10권2호
    • /
    • pp.139-144
    • /
    • 2016
  • 사람 피부 조직에서의 방사선 장해를 연구하는 방법은 실험동물에게 직접적으로 방사선을 노출하여 연구를 수행하게 된다. 이러한 연구방법은 방사선을 실험동물에게 노출시킨 후에 방사선에 의해 손상된 장해조직의 세포를 획득하여 분석을 하게한다. 이것은 시간적으로나 경제적으로도 많은 손실을 수반하게 된다. 이번 연구는 돼지의 피부를 사람의 피부로 가정하여 실험하였다. 돼지피부의 두께를 정하여 돼지피부를 통과한 후 피하조직 밑에서 세포가 직접적으로 받을 수 있는 방사선량을 얻어내어 수식화 하였다. 이번연구의 결과에 따르면 피부조직의 방사선 노출 후 피하조직 밑에서 발생되는 방사선량을 유추해낼 수 있다. 더 나아가 동물실험이 아닌 세포만을 가지고도 방사선에 의한 생체장해분석을 할 수 있는 데 효과적으로 사용할 수 있을 것이다.

벌크 중합법에 의한 폴리스티렌 중합공정의 열적위험성 (Thermal Hazards of Polystyrene Polymerization Process by Bulk Polymerization)

  • 한인수;이정석;이근원
    • 한국가스학회지
    • /
    • 제17권4호
    • /
    • pp.1-8
    • /
    • 2013
  • 본 연구에서는 벌크 중합법을 이용한 폴리스티렌 중합공정의 폭주반응에 대한 열적 위험성을 가속속도열량계(ARC)와 소규모 반응열량계(MM)를 이용하여 평가하였다. 당해 중합공정은 반응온도 $120^{\circ}C{\sim}130^{\circ}C$로 운전되어져야 하며, $130^{\circ}C$ 이상의 반응온도에서는 반응 생성물의 급격한 점도 증가로 인하여 반응기의 온도제어 실패에 따른 폭주반응의 위험성이 존재하였다. 또한 당해 중합공정의 반응온도($120^{\circ}C{\sim}130^{\circ}C$)에서 공정운전 초기에 반응기의 냉각실패가 발생할 경우 폭주반응으로 인해 반응기의 온도와 압력이 각각 30 ~ 50분 이내에 약 $340^{\circ}C$, 5.3 bar 까지 급격히 상승하여 반응기의 파열판이 파열되거나 반응기가 폭발할 수 있는 열적 위험성이 높게 나타났다.

Design of a Smart Safety Vest Incorporated With Metal Detector Kits for Enhanced Personal Protection

  • Rajendran, Salini D.;Wahab, Siti N.;Yeap, Swee P.
    • Safety and Health at Work
    • /
    • 제11권4호
    • /
    • pp.537-542
    • /
    • 2020
  • Background: Personal protective equipment (PPE) has been designed in such a way to reduce accident rates. Unfortunately, existing PPE is rather ineffective as it is not able to provide warning signals when hazard is around. The integration of intelligent systems is envisaged to increase the efficiency of existing PPE. Methods: This project designed a safety vest incorporated with metal detectors which can provide immediate warning to the field workers when there is metal hazard around. This product has greater freedom of design via smart manufacturing as it involves the assembly of few commercially available parts into a single entity. Briefly, the metal detector is a do it yourself (DIY) kit, and the safety vest is purchasable from any local market. The DIY kit was connected to a copper coil and being sewed into the safety vest. Results: The metal detector induces beeping sound when there is metal hazard around. A total of 121 engineering students were introduced to the prototype before being requested to answer a survey associated with the design. Respondents have rated >3.00/5.00 for the design simplicity, ease of usage, and light weight. Meanwhile, respondents suggested that the design should be further improved by increasing the metal detection range. Conclusion: It is envisaged that the introduction of this smart safety vest will allow the workers to carry out their duties securely by reducing the accident rates. Particularly, such design is expected to reduce workplace accident especially during night time at construction sites where the visibility is low.

Relationship between metformin use and mortality in tuberculosis patients with diabetes: a nationwide cohort study

  • Eunki Chung;Dawoon Jeong;Jeongha Mok;Doosoo Jeon;Hee-Yeon Kang;Heejin Kim;Heesun Kim;Hongjo Choi;Young Ae Kang
    • The Korean journal of internal medicine
    • /
    • 제39권2호
    • /
    • pp.306-317
    • /
    • 2024
  • Background/Aims: To determine whether metformin, which is considered a host-directed therapy for tuberculosis (TB), is effective in improving the prognosis of patients with TB and diabetes mellitus (DM), who have higher mortality than those without DM. Methods: This cohort study included patients who were registered as having TB in the National Tuberculosis Surveillance System. The medical and death records of matched patients were obtained from the National Health Information Database and Statistics Korea, respectively, and data from 2011 to 2017 were collected retrospectively. We classified patients according to metformin use among participants who used diabetes drugs for more than 28 days. The primary outcome was all-cause mortality during TB treatment. Double propensity score adjustment was applied to reduce the effects of confounding and multivariable Cox proportional hazard models were used to estimate adjusted hazard ratio (aHR) with 95% confidence interval (CI). Results: The all-cause mortality rate during TB treatment was lower (9.5% vs. 12.4%, p < 0.01) in the metformin user group. The hazard of death due to all causes after double propensity score adjustment was also lower in the metformin user group (aHR 0.76, 95% CI 0.67-0.86, p < 0.01). There was no significant difference in mortality between metformin users and non-users for TB-related deaths (p = 0.22); however, there was a significant difference in the non-TB-related deaths (p < 0.01). Conclusions: Metformin use in patients with TB-DM co-prevalence is associated with reduced all-cause mortality, suggesting the potential for metformin adjuvant therapy in these patients.

Assessment of Semi-Quantitative Health Risks of Exposure to Harmful Chemical Agents in the Context of Carcinogenesis in the Latex Glove Manufacturing Industry

  • Yari, Saeed;Asadi, Ayda Fallah;Varmazyar, Sakineh
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제17권sup3호
    • /
    • pp.205-211
    • /
    • 2016
  • Excessive exposure to chemicals in the workplace can cause poisoning and various diseases. Thus, for the protection of labor, it is necessary to examine the exposure of people to chemicals and risks from these materials. The purpose of this study is to evaluate semi-quantitative health risks of exposure to harmful chemical agents in the context of carcinogenesis in a latex glove manufacturing industry. In this cross-sectional study, semi-quantitative risk assessment methods provided by the Department of Occupational Health of Singapore were used and index of LD50, carcinogenesis (ACGIH and IARC) and corrosion capacity were applied to calculate the hazard rate and the biggest index was placed as the basis of risk. To calculate the exposure rate, two exposure index methods and the actual level of exposure were employed. After identifying risks, group H (high) and E (very high) classified as high-risk were considered. Of the total of 271 only 39 (15%) were at a high risk level and 3% were very high (E). These risks only was relevant to 7 materials with only sulfuric acid placed in group E and 6 other materials in group H, including nitric acid (48.3%), chromic acid (6.9%), hydrochloric acid (10.3%), ammonia (3.4%), potassium hydroxide (20.7%) and chlorine (10.3%). Overall, the average hazard rate level was estimated to be 4 and average exposure rate to be 3.5. Health risks identified in this study showed that the manufacturing industry for latex gloves has a high level of risk because of carcinogens, acids and strong alkalisand dangerous drugs. Also according to the average level of risk impact, it is better that the safety design strategy for latex gloves production industry be placed on the agenda.