• Journal of Environmental Health Sciences
• /
• v.37 no.1
• /
• pp.64-72
• /
• 2011

This study was performed to assess the removal efficiency on nitrogen, phosphorus and organic carbon in wastewater by spatial separation and internal recycling in a modified oxidation ditch process (modified OD). The performances of the modified OD were evaluated via laboratory-scale experiments. The process was operated at hydraulic retention times of 6-48 hours and solid retention times of 17-38 days. We found that organic carbon removal efficiency increased after the modified OD operation period. T-N removal efficiency remained stable; average T-N concentration of effluent was 8.02 mg/l after modified OD operation. In contrast, T-P concentration of effluent was over 1 mg/l. Nitrogen and phosphorus removal efficiency of modified OD at HRT 12 hr were 83.1% and 74.1%, respectively. Also, maximum efficiency was found at SRTs from 20 to 30 days. T-N removal efficiency was 83.1% at a C/N ratio from 3.0 to 3.5. However, T-N removal efficiency decreased at C/N ratios over 3.5. Also, T-P removal efficiency increased with HRT at C/P ratios in the same condition. Maximum efficiency was 74.1% at a C/P ratio from 25 to 28. T-N removal efficiency was 79.2% and T-P removal efficiency was 65.3% after M4 mode operation (added to the internal recycle line connected to the anoxic reactor). The modified OD with spatial separation and internal recycling developed in this study is, therefore, believed to be an improvement for solving problems in the nutrient removal technologies.

• Korea Journal of Hospital Management
• /
• v.28 no.2
• /
• pp.44-65
• /
• 2023

Purposes: As super-aging population and low fertility rates are threatening the sustainability of the National Health Insurance funds, enhancing the efficiency of hospital management is paramount. In the past, studies analyzing the efficiencies of hospitals primarily made inter-hospital comparisons, but it is important to assess hospitals' internal efficiency and develop improvement measures in order to attain practical improvements in hospital efficiencies. The purpose of this study is to analyze the efficiencies of specialists by medical specialty in a hospital in order to provide foundational data for efficient hospital management. Methodology/Approach: We used the activity-based costing (ABC) data and hospital statistical data from one tertiary hospital in Seoul to analyze the efficiency of specialists by medical specialty. Efficiency was analyzed and compared among specialists using the data envelopment analysis developed by Charnes, Cooper, and Rhodes (DEA-CCR) model and the slacks-based measure (SBM) models. The input variables were labor cost, material cost, and operational expenses, and the output variables were the number of outpatients, number of inpatients, outpatient revenue, and inpatient revenue. Findings: First, there was a marked deviation in efficiency across specialists. Second, there was a marked deviation in efficiency across medical specialties. Third, there was little difference in efficiency according to the specialist's sex, age, and job position. Fourth, the SBM model produced more conservative results and better explained efficiency parameters than the CCR model. Practical Implications: The efficiency of a specialist was more influenced by their medical specialty than their personal characteristics, namely sex, age, and job position. Therefore, Further research is needed to analyze the efficiencies of each subspecialty and identify factors that contribute to the variations in efficiencies across medical specialties, such as clinical practices and fee structures.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.1
• /
• pp.96-102
• /
• 1994

Factors affecting non-proficient analytical ability were compared and evaluated by rating of laboratories and round. Analyst Indices between proficient and non-proficient participants were different. Coefficients of determination($R^2$) for standard of toluene, xylene and trichloroethylene of the 4th round between some proficient and non-proficient participants were significantly different(p<0.05). But, there was no difference in the 5th round. Average desorption efficiency of non-proficient participants was 88%-98%, which was lower than 96%-100% of some randomly selected proficient participants. Also non-proficient participants have a large variance of desorption efficiency, 11.79-19.69%. In the 5th round, desorption efficiency of metyl iso-butyl ketone(MIBK) reported by all participants was lower than 90% tested by NIOSH and especially low compared to other analytes. Participants evaluated to be non-proficient in the metal part have 85%-100.84% of average recovery, which was larger variance than 98% of some proficient participants. Although it is difficult to find quantitatively factors causing non-proficiency in analytical ability, pretreatement techniques and experience of analyst seems to be more important factors to produce accurate analytical result.

• Management & Information Systems Review
• /
• v.32 no.1
• /
• pp.87-109
• /
• 2013

This study analyzed technical efficiencies of health service industry of OECD countries with DEA and SFA approaches using 10 year data from OECD Health Database. The results can be summarized as follows: First, Korea was found the best practice among 15 OECD countries based on CRS nondirectional SBM models. Second, it was found that some inefficiencies were due to environmental factors. Third, we found that environmental factors were important factors in efficiencies of health service industry by observing that there were large efficiency changes after adjusting slacks due to environmental factors. From the above, Korea led the OECD countries in health service industry and was the most competent. But this study has some limitation since the quality and cost of health care was not taken into account.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.64-69
• /
• 1999

This study was carried out the removal of Cr(VI) which was known to the toxic pollutant in industry using the process of UV and TiO$_2$ photocatalyst in a circular type reactor. In this experiment, the series of photocatalytic process for the removal of Cr(VI) has been selected as a model reaction in a circular type reactor in order to obtain the basic data on the influence of various experimental parameters such as circulation flow rate, pH of solution, initial Cr(VI) light illumination and TiO$_2$ dosage, and salicylic acid concentration. The results of this study were as follows; 1. With both UV light illumination and TiO$_2$ present, Cr(VI) was more effectively eliminated than with either UV or TiO$_2$ alone. 2. As the circulation flow rate of solution increased, the removal efficiency of Cr(VI) was increased. However, over 2.4 l/min of circulation flow rate, the efficiency wa limited. 3. A increase in the photocatalytic removal of Cr(VI) was noticed with decreasing pH. 4. An increase in the photocatalytic removal of Cr(VI) was noticed with decreasing Initial Cr(VI) concentration and first order kinetics was observed from the result at different initial concentration of Cr(VI). 5. Photocatalytic removal efficiency of Cr(VI) increased with increasing TiO$_2$ dosage. However, over 1.0 g/l of TiO$_2$ dosage, the efficiency reached a plateau. 6. As low concentration of saliculic acid were added, there was an increase in the removal efficiency of Cr(VI). However, over 300 mg/l of salicylic acid, the efficiecy was decreased. It eas found that application of photocatalysis to water treatment that contains both Cr(VI) and salicylic acid was possible.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.2
• /
• pp.81-88
• /
• 2023

SHM (Structural Health Monitoring) technique for monitoring aircraft structural health and damage, EHM (Engine Health Monitoring) for monitoring aircraft engine performance, and APM (Application Performance Management) is used for each function. APMS (Airplane Performance Monitoring System) is a program that comprehensively applies these techniques to identify the difference between the performance manual provided by the manufacturer and the actual fuel mileage of the aircraft and reflect it in the flight plan. The main purpose of using APMS is to understand the performance of each aircraft, to plan and execute flights in an optimal way, and consequently to reduce fuel consumption. First, it is to check the fuel efficiency trend of each aircraft, check the correlation between the maintenance work performed and the fuel mileage, find the cause of the fuel mileage increase/decrease, and take appropriate measures in response. Second, it is to find the cause of fuel mileage degradation in detail by checking the trends by engine performance and fuselage drag effect. Third, the APMS is to be used in making maintenance work decisions. Through APMS, aircraft with below average fuel mileage are identified, the cause of fuel mileage degradation is identified, and appropriate corrective actions are determined. Fourth, APMS data is used to analyze the economic analysis of equipment installation investment. The cost can be easily calculated as the equipment installation cost, but the benefit is fuel efficiency improvement, and the only way to check this is the manufacturer's theory. Therefore, verifying the effect after installation and verifying the economic analysis is to secure the appropriateness of the investment. Through this, proper investment in fuel efficiency improvement equipment will be made, and fuel efficiency will be improved.

• Journal of Environmental Health Sciences
• /
• v.28 no.5
• /
• pp.1-3
• /
• 2002

This study was to evaluate on the removal efficiencies of total nitrogen and phosphorus in municipal wastewater at MUNR process using sludge carbon source for environmental micro-organism. The removal efficiencies of total suspended solid were 85.9~91％, total nitrogen were 38.6~87.2％ and total phosphorus were 30.8~39.0％, respectively. It was shown that removal efficiency of nitrogen was effectively influenced by sludge carbon source treated with ultrasonication. The removal efficiency of total phosphorus was low because the sludge was not wasted during this treatment.

• Journal of Environmental Health Sciences
• /
• v.28 no.1
• /
• pp.93-97
• /
• 2002

The aim of this study was to evaluate on the removal effect of total nitrogen and phosphorus with municipal wastewater in ultrasonic nutrient removal (UNR) process using ultrasonic sludge carbon source. The removal efficiency for total nitrogen was 44.2% at biological nutrient removal (BNR) process, 50.8% at UNR process. The removal efficiency for total phosphorus was 45.6% at BNR process, 46.2% at UNR process. The removal of nitrogen was effectively influenced by ultrasonic sludge carbon source.

• Korean Journal of Health Education and Promotion
• /
• v.9 no.2
• /
• pp.52-63
• /
• 1992

The Purpose of this study is to develop the efficient ways of Computer Eduaction on Health Administration Related Department. The materials were collected from 23 directors of Health Administration Related Department with a structed questionaire by mailing. The efficiency program of Computer Education on Health Administration Related Department as follows : 1. A solution of Computer Anxiety 2. The modification of Computer Education Content 3. The reinforcement of Computer Practice 4. The development of Computer Education text for Health Administration Related Department 5. The CAI education method has to introduce.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.1
• /
• pp.1-12
• /
• 2017

Objectives: The major objectives of this study are to review the requirements for the advancement of occupational safety and health administrative organization and to propose measures to establish an Occupational Safety and Health Executive. Methods: The problems of occupational safety and health administrative organization in korea were examined empirically and cases of occupational safety and health administrative organizations in developed countries were investigated (United Kingdom, United States, Germany, and Japan). A plan for establishing an Occupational Safety and Health Executive was proposed over the short and medium term. Results: An occupational safety and health administration is characterized by a professional and technical nature, and even more so in modern society. Therefore the greatest value required by an occupational safety and health administrative organization is expertise. In addition, administrative values it requires include efficiency, specificity, independence, and activity. The Korean occupational safety and health administrative organization has a number of problems in terms of these values. The most appropriate way to realize these values is to establish an Occupational Safety and Health Executive. It is desirable to establish such an Occupational Safety and Health Executive in a phased manner taking into consideration its relationship with Korea Occupational Safety and Health Agency(KOSHA), including KOSHA's functional adjustment Conclusions: In order to solve the deep-seated problems in occupational safety and health administrative organization and to advance occupational safety and health administration in Korea, it is necessary to establish an Occupational Safety and Health Executive as a foundation for achieving an advanced industrial safety and health administration.