• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.105-109
• /
• 2011

Since a severe accident, which happens in low frequency, can cause serious damages, the interests in off-site consequence analysis for a nuclear power plant have been increased after Chernobyl, TMI and Fukushima accidents. Consequences, which are the effects on health and environment caused by released radioisotopes, are evaluated using MACCS II code based on the method of Level 3 PSA. To perform a consequence analysis for the reference plants, the input data of the code were generated such as meteorological data, population distribution, release fractions, and so on. Using these input data, acute and lifetime dose as an organ, CCDF for early fatalities and latent cancer fatalities, and average individual risk were analyzed by using MACCS II code in this study. These results might contribute to establishing accident management plan and quantitative health object.

• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3851-3863
• /
• 2024

The speed of offsite consequence analysis is highly important due to the extensive calculations required to handle all the scenarios for a single-unit or multi-unit Level 3 PSA (probabilistic safety assessment). To perform an offsite consequence analysis as part of Level 3 PSA, various input parameters are considered, amongst which certain parameters, such as plume segments, spatial grids, and particle size distributions, have flexible input formats. This study describes the development of an effective optimization method to reduce the analysis time as much as possible while maintaining the accuracy of the offsite consequence analysis results. The effect of plume segmentation on offsite consequence analysis was investigated by observing deviations in analysis results and changes in the required analysis times following changes in plume release. Then a plume segmentation optimization method based on the cumulative release fraction slope was developed to intensively analyze the sections with rapid release and to simplify the analysis for the sections with nonsignificant release. As a result of applying this method, the analysis time was reduced by about 54.5 % compared to the base case, while the resulting health effects showed very small deviations of 0.03 % and 1.77 % for early fatality risk and cancer fatality risk, respectively.

• Journal of the Korean Society of Safety
• /
• v.17 no.3
• /
• pp.66-72
• /
• 2002

During the last ten years, effort has been made for reducing maintenance cost for aged equipments and ensuring safety, efficiency and profitability of petrochemical and refinery plants. Hence, it was required to develop advanced methods which meet this need. RBI(Risk Based Inspection) methodology is one of the most promising technology satisfying the requirements in the field of integrity management. In this study, a qualitative assessment algorithm for RBI based on the API 581 code was reconstructed for developing an RBI software. The user-friendly realRBI software is developed with a module for evaluating qualitative risk category using the potential consequence factor and the likelihood factor.

• Journal of Radiation Protection and Research
• /
• v.28 no.3
• /
• pp.189-197
• /
• 2003

The Level 3 PSA being termed accident consequence analysis is defined to assess effects on health and environment caused by radioisotopes released from severe accidents of nuclear power plants. In this study consequence analysis on health effects depending on release characteristics of radioisotopes has been peformed using the 3 MACCS code in severe accidents. The results of this study may contribute to identifying the relative importance of various parameters occurred in consequence analysis as well as to assessing risk reduction accident management strategies. Especially three parameters for the purpose of consequence analysis, such as the release height, the heat content, and the duration time, are used to analyze the variation of early fatalities and latent cancer fatalities. Also, in this study risk assessment using the concept, 'products of uncertainty and consequences', has been performed using consequence of MACCS and frequency on source term category 19 scenarios from IPE (Individual Plant Examination) analysis.

• Safety and Health at Work
• /
• v.6 no.4
• /
• pp.353-356
• /
• 2015

Background: In 2012, the Alaska Section of Epidemiology investigated personnel potentially exposed to a Brucella suis isolate as it transited through three laboratories. Methods: We summarize the first implementation of the United States Centers for Disease Control and Prevention 2013 revised recommendations for monitoring such exposures: (1) risk classification; (2) antimicrobial postexposure prophylaxis; (3) serologic monitoring; and (4) symptom surveillance. Results: Over 30 people were assessed for exposure and subsequently monitored for development of illness. No cases of laboratory-associated brucellosis occurred. Changes were made to gaps in laboratory biosafety practices that had been identified in the investigation. Conclusion: Achieving full compliance for the precise schedule of serologic monitoring was challenging and resource intensive for the laboratory performing testing. More refined exposure assessments could inform decision making for follow-up to maximize likelihood of detecting persons at risk while not overtaxing resources.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.745-754
• /
• 2012

The correlations between Large Early Release Frequency (LERF) and Early Fatality need to be investigated for risk-informed application and regulation. In Regulatory Guide (RG) -1.174, while there are decision-making criteria using the measures of Core Damage Frequency (CDF) and LERF, there are no specific criteria on LERF. Since there are both huge uncertainties and large costs needed in off-site consequence calculation, a LERF assessment methodology needs to be developed, and its correlation factor needs to be identified, for risk-informed decision-making. A new method for estimating off-site consequence has been presented and performed for assessing health effects caused by radioisotopes released from severe accidents of nuclear power plants in this study. The MACCS2 code is used for validating the source term quantitatively regarding health effects, depending on the release characteristics of radioisotopes during severe accidents. This study developed a method for identifying correlations between LERF and Early Fatality and validates the results of the model using the MACCS2 code. The results of this study may contribute to defining LERF and finding a measure for risk-informed regulations and risk-informed decision-making.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1108-1115
• /
• 2024

Assuring physical security for Micro Modular Reactors (MMRs) will be key to their licensing. Economic constraints however require changes in how the security objectives are achieved for MMRs. A promising new approach is the so-called performance based (PB) approach wherein the regulator formally sets general security objectives and leaves it to the licensee to set their own specific acceptance criteria to meet those objectives. To implement the PB approach for MMRs, one performs a consequence-based analysis (CBA) whose objective is to study hypothetical malicious attacks on the facility, assuming that intruders take control of the facility and perform any technically possible action within a limited time before an offsite security force can respond. The scenario leading to the most severe radiological consequences is selected and studied to estimate the limiting impact on public health. The CBA estimates the total amount of radionuclides that would be released to the atmosphere in this hypothetical scenario to determine the total radiation dose to which the public would be exposed. The predicted radiation exposure dose is then compared to the regulatory dose limit for the site. This paper describes application of the CBA to four different MMRs technologies.

• The Korean Nurse
• /
• v.17 no.5 s.97
• /
• pp.55-69
• /
• 1978

Introduction Since 1962 Korea has taken long strides to make rapid industrial development. Due to the industrial development there have been rapidly increasing number of industries as well as number of working people. As a consequence, industrial health s

• Journal of the Korea Safety Management & Science
• /
• v.18 no.3
• /
• pp.63-70
• /
• 2016

The main point of this study is to find out duplicates and differences among various regulations from different organizations. Also, it focuses on creating a reasonably unified regulation system to standardize safety & environment management. In this study, I analyzed the commonalities and the differences of two systems which are typical korean Process Safety Management System and off-site Consequence Analysis. It is confirmed that there are 25 species of overlapped material of those two systems and assessment like handling material information, facilities lists, hazardous substances and list of machine power. Process safety report focuses on onsite workers and facility protect. On the other hand, off-site Consequence Analysis focuses on design, arrangement and management of handling facility from off-site influence. I found difference two system of Enforcement purposes and way. Contradiction of Harmful information of Chemicals Control Act and occupation safety and health acts from same material. To be specific, There are no unit rule of occupation safety and health acts. so it permit inch, psi etc. But Chemicals Control Act provides that m, Mpa units. Therefore, Each regulatory duplication of items for chemicals management, standardization is writing so that you can coordinate overlapping items in the measures the need to be presented.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.3
• /
• pp.193-203
• /
• 2019

The issue of health risks from consuming unhealthy product is an important issue that is happening right now. Both developed and developing countries are already aware of the need for attention to the health-risk products. One tool that is believed to be able to change the consumption behavior of the health-risk products is the use of warning label on product packaging. As a persuasive act, both visual and textual warning label are believed to be able to change people's consumption behavior. In addition to the labels that contain health hazards, this research also uses social consequence contents. The main targets of such unhealthy product marketing are children and adolescents. Correspondingly, this study targets the age groups of kids and tweens. The method used in this research is experiment, involving 180 participants from two age groups namely kids and tweens. As a result, the study found that the influence of warning label on the age of tweens is greater in the age of the children. Meanwhile, the use of visual and textual warning label using social consequences contents, proved to be effective at the age of tweens. These results are useful for enrich social marketing subjects, especially within warning label research.