• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.565-573
• /
• 2017

This paper presents a multistage in-flight alignment (MIFA) method for a strapdown inertial navigation system (SDINS) suitable for moving vehicles with no initial attitude references. A SDINS mounted on a moving vehicle frequently loses attitude information for many reasons, and it makes solving navigation equations impossible because the true motion is coupled with an undefined vehicle attitude. To determine the attitude in such a situation, MIFA consists of three stages: a coarse horizontal attitude, coarse heading, and fine attitude with adaptive Kalman navigation filter (AKNF) in order. In the coarse horizontal alignment, the pitch and roll are coarsely estimated from the second order damping loop with an input of acceleration differences between the SDINS and GPS. To enhance estimation accuracy, the acceleration is smoothed by a scalar filter to reflect the true dynamics of a vehicle, and the effects of the scalar filter gains are analyzed. Then the coarse heading is determined from the GPS tracking angle and yaw increment of the SDINS. The attitude from these two stages is fed back to the initial values of the AKNF. To reduce the estimated bias errors of inertial sensors, special emphasis is given to the timing synchronization effects for the measurement of AKNF. With various real flight tests using an UH60 helicopter, it is proved that MIFA provides a dramatic position error improvement compared to the conventional gyro compass alignment.

• Journal of Advanced Navigation Technology
• /
• v.28 no.4
• /
• pp.379-385
• /
• 2024

INS(inertial navigation system) aligns itself using gravity and Earth's rotational rate from accelerometers and gyro sensors when stationary. Typically, ZUPT(zero velocity update), which is based on a linear error model Kalman filter, is used when it is stationary. However, such algorithms assume stationary conditions, leading to increased alignment errors or filter divergence during maritime mooring due to wave-induced motion. This paper designs a mooring alignment algorithm for maritime platforms using a Kalman filter, which uses large heading angle error model and an initial position correction technique. And it is validated by simulation. Furthermore, it is confirmed that applying this to a rotational INS dramatically improves performance through the principle of bias cancellation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.155-162
• /
• 2016

TASS(Towed Array Sonar System) is a sonar system which tows the sensor array behind a platform. Array shape is generally assumed to be a straight line. But the array shape is often distorted by oceanic current or platform maneuvering which causes the performance loss of signal processing method like beamforming. So array shape estimation methods are needed. Typically the method based on Kalman filter using heading sensor is used. In practice, the measurement is corrupted by biases which are caused by rotation of the tow cable, varying magnetic fields and slowly varying stresses in the mechanical construction. Although they can't be calibrated but can be estimated. In this paper, we suggest the array shape estimation method based on Kalman filter compensating the sensor biases.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.532-541
• /
• 2014

The ship-borne mobile down range telemetry antenna system having 4.6 m reflector antenna and 3-axis mounting structure at S-band requires the precise pointing accuracy at sea for the launch mission. Using the LEO satellites tracking, a method to determine and verify the antenna pointing and tracking performance, and to find the pointing bias which dominantly contributes to the pointing inaccuracy, is presented. Based upon the tests conducted on the Jeju sea and Pacific sea, the pointing bias is determined and its origin is also identified as the drift of the heading angle of the gyrocompass. The applied systematic correction taking into account the pointing bias, and the achieved improvement of the pointing accuracy are shown. Thanks to the correction, it is presented that this antenna tracked the launcher(KSLV-I) stably within the required pointing accuracy in the following KSLV-I third launch.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.107-112
• /
• 1984

수동 Wave-front curvature ranging 방법의 통계적성능에 대한 일반적 결과가 유도된다. 센서들의 비선형 및 부동간격 센서들의 운동효과로 인한 표적거리의 편의(bias) 및 편차9variance)가 센서간의 운동이 상관관계를 가지고 있을 때 유도된다. 이 논문은 센서운동이 정규분포(normal distribution)를 가지며 평균이 0, 같은 편차 및 투시할 수 있는 higher moment를 가지고 있다고 가정한다. 유도된 일반적 결과를 이용하여 거리편의 및 편차는 표적거리, 방위, 센서운동의 상관계수 및 방향각(heading)표준편차 변화에 대해 그림으로 나타나 있다. 표적거리가 센서간격보다 아주 큰 경우 센서간격이 감소할수록, 표적거리가 증가할수록, 거리편의 및 편차는 증가한다. 상관계수가 증가할수록 거리편의는 직선적으로 감소하며, 거리편차는 센서 방향각 오차가 클 때 최소가 되는 상관계수가 존재하며 이는 표적거리, 방위 및 센서간격의 복합함수이다.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.1
• /
• pp.71-78
• /
• 2024

In indoor environments, since global positioning system (GPS) signals can be blocked by obstacles, such as building structure. the performance of GPS-based positioning methods can be degraded because of the loss of GPS signals. To solve this problem, various localization schemes using inertial measurement unit (IMU) sensors, such as gyroscope, accelerometer, and magnetometer, have been proposed to enhance the positioning accuracy in indoor environments. IMU-based positioning methods can estimate the location of the user by calculating the velocity and heading angle of the user without the help of GPS. However, low-cost MEMS IMUs may lead to drift error and large bias. In addition, positioning errors in IMU-based positioning approaches can be caused by the irrelevant motion of the pedestrian. In this study, we propose an enhanced indoor positioning method that provides more reliable localization results by using the camera, light detection and right (LiDAR), and ARKit framework on the iPhone. Through reliable positioning results and augmented reality (AR) experiences, our indoor positioning system can provide indoor space guidance services.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.171-178
• /
• 2017

In this paper, in order to verify the performance of a localization algorithm using GPS as an auxiliary sensor, the algorithm was applied to a hovering-type autonomous underwater vehicle (AUV) to perform a field test. The applied algorithm is an algorithm to improve the accumulated positional error of dead reckoning using doppler velocity logger(DVL) and tilt-compensated compass module (TCM) mounted on the AUV. GPS when surfaced helps the algorithm to estimate the position and the heading bias error of TCM for geodetic north, which makes it possible to perform dead reckoning on north-east-down (NED) coordinates. As a result of field test performing heading control, it was judged that the algorithm could improve the positional error, enhance the operational capability of AUV and contribute to the research of underwater navigation depending on a magnetic compass.

• The Journal of Internal Korean Medicine
• /
• v.40 no.3
• /
• pp.409-424
• /
• 2019

Objectives: This research aimed to confirm the efficacy of oriental medicine in sixth cranial nerve palsy and to evaluate the quality of the studies. Methods: Using the medical subject heading (MeSH) keywords "abducens nerve palsy", "abducens nerve paralysis", "sixth nerve palsy", "herbal medicine", "Chinese medicine", "oriental medicine" and "acupuncture", we collected the research papers through an electronic database search in Oriental Medicine Advanced Searching Integrated System (OASIS), National Discovery for Science Leaders (NDSL), PubMed, Cochran Library, and China National Knowledge Infrastructure (CNKI). Results: A total of 136 papers were searched from the databases. Among these, 15 case reports and 8 randomized controlled trials (RCTs) met our criteria. 17 articles were found on the use of acupuncture as the main intervention, 11 on the use of herbal medicine as the main intervention, and 9 on the use of electroacupuncture as the main intervention. The frequently used acupoints were LI4, EX-HN5, GB1, BL2, TE23, LR3, BL1, ST2, GB20, and ST36. All 23 studies confirmed the efficacy of Korean medicine. According to the assessment using the risk of bias, the overall quality of the RCTs was low. Conclusions: Twenty-three papers suggested that Korean medicine treatment for abducens nerve palsy was effective in many cases. Analyzing the potential bias was difficult.