• Archives of Plastic Surgery
• /
• 제45권4호
• /
• pp.379-383
• /
• 2018

Septoplasty/septorhinoplasty is a common ear, nose and throat procedure offered for those patients with deviated septum who are suffering from nasal obstruction and functional or cosmetic problems. Although it is a basic and simple procedure, it could lead to catastrophic complications including major skull base injuries which result in cerebrospinal fluid (CSF) leaks. We describe two different cases of traumatic CSF leaks following septoplasty/septorhinoplasty at two different sites. The first patient suffered a CSF leak following septoplasty and presented to Alexandria University Hospital. The leak was still active at presentation and identified as coming from a defect in the roof of the sphenoid sinus and was repaired surgically. The second patient presented 4 days after her cosmetic septorhinoplasty with a CSF leak and significant pneumocephalus. She was managed conservatively. Understanding the anatomical variations of the paranasal sinuses and implementing proper surgical techniques are crucial in preventing intracranial complications when performing either septoplasty or septorhinoplasty. A good quality computed tomography of the nose and paranasal sinuses is a valuable investigation to avoid major complications especially CSF leaks following either procedure.

• Design & Manufacturing
• /
• 제13권4호
• /
• pp.1-9
• /
• 2019

In-mold Coating is a method that can simultaneously perform injection molding and surface coating in injection mold. The material used for coating is two-component polyurethane which is composed of polyol and isocyanate. L-type mixing head can be used to mix polyol and isocyanate uniformly, and inject them inside the mold cavity. The surface quality of the injection molded products by using in-mold coating depends on the mixing uniformity between main agent and hardener. In this study, flow analysis was performed to design a mixing head for uniform mixing of two-component polyurethane. Especially the effects of design parameters of mixing head on mixing uniformity and nozzle pressure were investigated. The parameters of mixing head were mixing chamber diameter, cleaning cylinder diameter, nozzle alignment angle in the horizontal and vertical direction, and cleaning piston position. It was found that optimal design values were mixing chamber diameter of 3.5 mm, cleaning cylinder diameter of 5.0 mm, nozzle horizontal/vertical alignment angles of 140°/160°, and cleaning piston position of 1.8 mm. The optimal values would be used to develop a two-component mixing head achieving an uniform mixing for in-mold coating.

• Journal of Biosystems Engineering
• /
• 제19권4호
• /
• pp.329-342
• /
• 1994

In order to reduce the production cost and improve the quality of dairy feed, several dairy feed mill models suitable for Korean farm size were developed. 6 TMR models were developed for the 1000, 600, 200 head of dairy cattle, and evaluated for capital investments and production costs to suggest the best model. Followings are summary of this study : 1. TMR terminal models were designed that dairy production capacity of TMR1000 models are 40 ton/day, TMR600 model is 20 ton/day and TMR200 models are 10 ton/day. Also, they can be extended their capacity up to twice. 2. Capital investment of TMR terminal models is 145 million won for TMR200-1,205 million won for TMR600 and 609 million won for TMR1000-3 model. 3. The bigger TMR terminal model has the more advantage in production cost. The best model for 1000 head of dairy cattle farm was TMR1000-3 with 10,849 won/ton of production cost, TMR600 for 600 head of dairy cattle farm with 13,829 won/ton, TMR200-1 for 200 head of dairy cattle farm with 16,943 won/ton of production cost, so feed production cost for the 200 head farm was 50% higher than 1,000 head size farm.

• 대한두경부종양학회지
• /
• 제39권1호
• /
• pp.11-14
• /
• 2023

The primary treatment of oral cavity cancer is still surgery. By discussing the surgical treatment of oral cavity cancer, the basic concept of head and neck surgery could be thoroughly reviewed. The oral cavity is defined as the hard palate and the anterior 2/3 of the tongue. With appropriate reconstruction, most defects can be repaired without a significant change in quality of life, unlike in the oropharynx or hypopharynx, where aspiration problems frequently occur. The selection of a surgical approach that can provide an appropriate field of view to obtain a resection margin of 5 mm or more has become the core of head and neck surgery. The role of prophylactic neck dissection is also well established in oral cavity cancer patients. Mandibulotomy for access to the oral cavity or mandibulectomy due to cancer invasion requires bony surgical techniques, and reconstruction also requires bone tissue reconstruction techniques as well as soft tissue. Therefore, oral cancer surgery is the most important primary area where all techniques of head and neck surgery are mobilized.

• 소음진동
• /
• 제11권1호
• /
• pp.76-81
• /
• 2001

This paper addresses experimental results carried out to investigate the transmission of seat vibration to the head for Korean. Vertical seat vibration in the frequency range of 0.5-30 Hz was applied to a seated Korean male subject. To examine the intra-variable effects on transmissibility, five different postures and three different vibration excitation levels were considered. The applied acceleration and head accelerations of the seated subject were measured simultaneously by using a 6-axes bite-bar. Detailed experimental results of measured transmissibilities are illustrated for each posture and/or vibration excitation level, and they were compared to an International Standard. They are found to allow the identification of dynamic characteristics of Korean seated body for various reat vibration environments. Furthermore, they are expected to be very useful in designing new seats for automotive and railway vehicles and in improving their vibration ride quality.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2006년도 동계 학술대회 논문집
• /
• pp.31-34
• /
• 2006

Purposes of this research are convenience of manufacture, quality sophistication and reduction of a/s' ratio by that improve several shortcomings of existing steel housing The Housing of head is changed existent steel housing to ABS (acrylonitrile butadiene styrene) copolymer housing and its shape is changed. It does not need that paint housing by paint. so We may not care scar at storage or manufacture. The fast work speed and A/S is possible by combining a safety plate and a housing by volt and spring washer. When disjoint head part, there is no damage of safety plate and housing. Noise is disappeared by resonance phenomenon in early rpm at motor moving. When neck part of housing and a middle pipe are connected by drill nasa, the work is easier Also, there is sense of security little more catching motor in housing The improvement accomplished much improvements including light weight of head part.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.572-574
• /
• 2014

Researches on three-dimensional multimedia has been performed actively in recent years. Virtual sound technology corresponding to virtual image should be provided to implement 3D multimedia with high quality. Head-related transfer function (HRTF) plays a key role in this research area. HRTFs measured in changing azimuth, elevation, and distance for each and every subject is necessary for ideal solution. However, it is practically impossible to measure all subjects' HRTFs, so various HRTF databases have been built by many researchers. Because HRTF displays quite different aspects from subject to subject, HRTF of dummy head has been used for generic usage. However, mannequin's HRTF showed much worse performance comparing with individual case so this solution should be improved. From previous work, standardization of HRTF based on tensor-singular value decomposition method has been proposed. For effective extraction of standard HRTF, three different decomposition methods are compared in this paper.

• 산업경영시스템학회지
• /
• 제34권3호
• /
• pp.35-40
• /
• 2011

5-axis laser cutting has great advantages when it is applied to three dimensional machining requiring high cutting quality. For developing 5-axis CNC laser cutting systems, however, many problems such as rotating a laser head or a working table, 5-axis servo-control mechanism, tool path generation and post-processing, and collision avoidance between a laser head and a work-piece should be solved. In this paper, we deal with developing a motion simulator for 5-axis laser cutting machine with a nutating cutting head whose rotational axis is in an inclined plane. Two essential modules such as post-processor and cutting motion simulator was developed based on a commercial 3D CAD of UG-NX. The developed system was applied to three dimensional cutting products and showed the validity of the developed methods.

• Radiation Oncology Journal
• /
• 제38권2호
• /
• pp.84-92
• /
• 2020

Patients undergoing radiation therapy for head and neck cancer (HNC) experience significant early and long-term side effects. The likelihood and severity of complications depends on a number of factors, including the total dose of radiation delivered, over what time it was delivered and what parts of the head and neck received radiation. Late side effects include: permanent loss of saliva; osteoradionecrosis; radiation recall myositis, pharyngoesophageal stenosis; dental caries; oral cavity necrosis; fibrosis; impaired wound healing; skin changes and skin cancer; lymphedema; hypothyroidism, hyperparathyroidism, lightheadedness, dizziness and headaches; secondary cancer; and eye, ear, neurological and neck structures damage. Patients who undergo radiotherapy for nasopharyngeal carcinoma tend to suffer from chronic sinusitis. These side effects present difficult challenges to the patients and their caregivers and require life-long strategies to alleviate their deleterious effect on basic life functions and on the quality of life. This review presents these side effects and their management.

• The Korean Journal of Pain
• /
• 제28권2호
• /
• pp.116-121
• /
• 2015

Background: To explore the relationship between persistent post-radiotherapy pain and locoregional recurrence in head and neck cancer patients. Methods: Five year retrospective data was reviewed of 86 patients of head and neck cancer treated with radiotherapy who continued to have pain at 6 weeks after completion of treatment. At follow-up after 3 months, these patients were stratified into: Group A (n = 39) constituted of patients whose pain subsided and Group B (n = 47) were patients who continued to have persistent pain. Results: At median follow-up time of 25 months (range: 8-47), one patient (2.6%) and 18 (38.3%) patients in group A and group B had locoregional recurrence respectively (P < 0.0001). Furthermore, group B patients had higher mean pain score levels as compared to group A (P = 0.03). Patients in whom pain subsided within 3 months had statistically much greater disease-free survival in comparison to those with persistent pain (P < 0.0001). Conclusions: Pain in head and neck cancer is an important symptom and should be considered a poor prognostic factor. In the current study, the majority of the patients with persistent pain had recurrent disease as compared to those in whom pain subsided within 3 months of post-treatment. It is suggested that patients with persistent pain need more intense follow-up and should be investigated thoroughly to detect recurrence at an early stage to provide a better quality of life.