• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.1
• /
• pp.90-94
• /
• 2022

Metal 3D-printing technology enables the manufacture of complex features or internal structures, which is not possible in fabrication by conventional cutting methods. The most successful types of metal 3D printing have been powder bed diffusion and directed energy deposition, which use laser heads exploiting high-power laser sintering metal powder. In this study, a cost-effective optical design was proposed for a 2-kW-level fiber laser head. Only two commercial lenses, a beamsplitter and a window, are used in the laser head, satisfying the technological requirements. According to the optical design, the spot size was 2.54 mm, and the stand-off distance from the laser head was 295 mm. The intensity distribution was Gaussian. Thus, smooth power sintering was possible without any laser spot marks. Monte Carlo analysis was employed to verify the consistency of the optical performance under conventional assembly tolerance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.114-119
• /
• 2004

An oxyge generator, which is applied to a particular space such as automobile, must consider compactness and lightweight as well as problems caused by noise, vibration and heat dissipation. For these matters, a BLDC motor was adopted to reduce heat while a bed using synthetic zeolite NaX made it possible to generate high-density oxygen with relatively small size. Moreover, owing to the characteristic of synthetic zeolite Nax, a two-head vacuum pump was designed to desorb nitrogen without additional pump unit.

• Nuclear Engineering and Technology
• /
• v.45 no.3
• /
• pp.295-310
• /
• 2013

Industry- or regulatory-sponsored research activities on the resolution of Generic Safety Issue (GSI)-191 were reviewed, especially on the chemical effects. Potential chemical effects on the head loss across the debris-loaded sump strainer under a post-accident condition were experimentally evidenced by small-scale bench tests, integrated chemical effects test (ICET), and vertical loop head loss tests. Three main chemical precipitates were identified by WCAP-16530-NP: calcium phosphate, aluminum oxyhydroxide, and sodium aluminum silicate. The former two precipitates were also identified as major chemical precipitates by the ICETs. The assumption that all released calcium would form precipitates is reasonable. CalSil insulation needs to be minimized especially in a plant using trisodium phosphate buffer. The assumption that all released aluminum would form precipitates appears highly conservative because ICETs and other studies suggest substantial solubility of aluminum at high temperature and inhibition of aluminum corrosion by silicate or phosphate. The industry-proposed chemical surrogates are quite effective in increasing the head loss across the debris-loaded bed and more effective than the prototypical aluminum hydroxide precipitates generated by in-situ aluminum corrosion. There appears to be some unresolved potential issues related to GSI-191 chemical effects as identified in NUREG/CR-6988. The United States Nuclear Regulatory Commission, however, concluded that the implications of these issues are either not generically significant or are appropriately addressed, although several issues associated with downstream in-vessel effects remain.

• Food Science and Biotechnology
• /
• v.18 no.5
• /
• pp.1071-1075
• /
• 2009

Allyl isothiocyanate (AI), a volatile compound of mustard, has excellent antimicrobial effects, but its volatility hinders its wide usage as an ingredient of food products. Microencapsulation technique, therefore, was applied for delaying the release time of AI. For delaying the release time of AI, the mustard powder, which contained AI, was microencapsulated with 5% modified starch by using fluidized bed processing. The efficiency of the controlled release of AI at various pH was analyzed by the head space (HS) analysis and solid phase microextraction (SPME) method using gas chromatography (GC). Also, modified starch encapsulated powder was added into kimchi for applying in food industry. As the result, the release time of AI was delayed by microencapsulation with modified starch and the higher pH could be the faster release of AI. Also, the period until the pH values and total acidity of kimchi reached up to 4.5 and 0.6%, which give its malsour taste, was extended by microencapsulation. These results showed that modified starch encapsulated powder could prolong the preservation in food system.

• Journal of Korean Foot and Ankle Society
• /
• v.11 no.1
• /
• pp.97-99
• /
• 2007

Nail bed malignancies are rare entities. Most nail bed malignancies are squamous cell carcinoma (SCC)s. Less than 10% of subungual SCCs occur in the foot. Fifty percent occurred on the hallux and approximately 25% on both the fourth and fifth digits. The correct diagnosis is often delayed because nail bed malignancies are frequently mistaken for benign or infectious processes. SCC on extremities is hard to distinguish from the benign lesion like chronic ulcer, fistula caused by chronic osteomyelitis, and abscess fistula. Attention should especially be paid in diagnosing the subungual lesion because paronychia is a common disease. SCC is the most common carcinoma second to malignant melanoma as a soft tissue malignant tumor in the West, and it involves mainly the head, neck and upper extremities but rarely involves lower extremities, particularly the toes. The authors emphasize the importance of a biopsy for chronic nonhealing lesions by presenting this case.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.8
• /
• pp.478-488
• /
• 2017

Stormwater filtration is widely used for the urban runoff treatment. However, intensive maintenance and lack of information about the performance have resulted in an increased need of proper evaluation. In this study, the performance of an upflow stormwater runoff filtration system, consisting of a supporting unit and a filtration unit filled with a ceramic media, was investigated. The maximum head loss increase was about 3 cm under the suspended solid (SS) load of $30kg/m^2$ and the SS removal was more than 96%, when the filtration velocity was 20-40 m/h. The head loss and the porosity of the media can successfully be described by a power model. It was confirmed that the a significant amount of SS can effectively be removed at supporting unit, minimizing SS load to the filter media bed. Several backwashing strategies have been tested to establish the optimum condition. It was found that the stagnant water discharge is important to minimize the SS release immediately after backwashing. Also, the filter bed loaded with $400-450kg/m^2$ SS can almost completely be washed to reduce the head loss to the that of empty bed. The results in this study indicate that the upflow ceramic media filter is an excellent alternative to stormwater treatment, with high SS removal and long lifespan.

• Korean Journal of Head & Neck Oncology
• /
• v.38 no.1
• /
• pp.37-41
• /
• 2022

Sebaceous carcinoma is extremely rare in the parotid gland. Recently, we experienced a case of carcinoma with sebaceous differentiation arising from the parotid gland in patient who was diagnosed as parotid adenoma carcinoma and underwent total parotidectomy. A 73-year-old male visited our department for the evaluation of 3-month history of infra-auricular mass combined with pain. Radiologic finding showed lobulated enhancing and solid mass with calcification in the right parotid gland. Initially, total parotidectomy with supraomohyoid neck dissection was performed. Pathological findings showed capsulated whitish mass with hemorrhage and cystic degeneration. Immunohistochemically, CK7, CK5/6, p63 were positive and CEA was negative. The intra-operative frozen section diagnosis was mucoepidermoid carcinoma. The permanent diagnosis was changed to adenocarcinoma, NOS(not otherwise specified). Fourteen months later, the newly developed mass was noticed on the operation bed. The mass was clinically diagnosed as recurred adenocarcinoma. Revision parotidectomy was performed and pathological findings revealed that the tumor was newly developed sebaceous carcinoma. We report a case of carcinoma with sebaceous differentiation in parotid gland with a review of literature.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.20-25
• /
• 2012

A Crankshaft multi grinding machine is developed for manufacturing of high precision crankshaft. The grinding head part of the developed machine should be moved precisely during grinding of work materials. In this paper, structural and modal analysis for the crankshaft multi grinding machine is carried out to check the design criteria of the machine. The analysis is carried out by FEM simulation using the commercial software. The machine is modeled by placing proper shell and solid finite elements. The results of structural and modal analysis confirmed that the structural characteristics of grinding machine and the structural safety are considered secure.

• Journal of Biosystems Engineering
• /
• v.13 no.3
• /
• pp.59-70
• /
• 1988

A computer simulation model for rice circulating concurrent-flow dryer was developed and verified by conduction a series of pilot-scale experiment. The effects of design parameter and operating conditions on dryer performance were analyzed by using simulation. The results indicated that the developed model was found suitable for analyzing operating characteristics. The other results from simulation also showed that; 1) an increse in the initial moisture content resulted in an increase in the drying rate and a reduction in the grain temperature and total energy requirements. 2) an increase in the drying air temperature resulted in an increase in the drying rate and grain temperature. 3) an increase in air flow rate resulted in an radical increase in drying rate, fan power requirements and total energy requirements but an radical decrease in final head rice yield. 4) an increase in the bed depth resulted in an increase in fan power requirements and a lowering of the final head rice yield.

• Journal of Biosystems Engineering
• /
• v.42 no.2
• /
• pp.104-111
• /
• 2017

Purpose: We have studied the necessary qualities of seedlings of some leafy vegetables for a riding-type two-row automatic transplanter. When seedlings are planted using a transplanter, long roots may be rounded in the bottom of the tray, and this can interfere with the separation of the seedlings. Uprightness related to leaf spread angle is an important quality for seedlings in mechanical planting. Methods: To select cultivars suitable for the transplanter, we compared varieties of Kimchi cabbage (Chukwang, Daetong, Whipalam and Namdo), head lettuce (Abi and Sensation), cabbage (YR Onnuri, YR Hogel, Harutama, and Ogane), and broccoli (Nicegreen and Earlyyou). To compare the effect of bed soil on root formation and growth, we used five types of soil: Chologi, Burger, Wonjomix, Bio, and Baroker with 2.6-3 L per tray. Growth increment and the degree of root formation were measured according to the RDA guidelines 25 days after sowing for Kimchi cabbage and head lettuce and 44 days after sowing for cabbage and broccoli. Conclusions: According to the plug tray, the optimum seedling age in both 128- and 200-hole trays was 28 days for Kimchi cabbage and 44 days for cabbage and broccoli. Head lettuce took 35 days in 128-hole trays and 31 days in 200-hole trays. Burger soil was most effective for root formation and growth of the four kinds of leafy vegetables; it appeared that smaller soil volume led to faster root formation.