• 방사성폐기물학회지
• /
• 제9권2호
• /
• pp.87-92
• /
• 2011

본 논문은 극저준위폐기물 관리에 관한 중국의 정책과 규정들을 소개하고 있다. 오래된 시설의 중요한 해체 및 부지복구 프로그램에 주어진 바와 같이, 극저준위폐기물의 처분을 위한 새로운 시설의 필요성이 대두되고 있다. 여러가지 일반적인 설계원리들은 다중방벽에 의해 폐기물을 격리시키는 중저준위폐기물 처분시설과 같다. 콘크리트 방벽을 사용하는 것 대신에 벤토나이트 또는 고밀도 폴리에틸렌 멤브레인을 사용하는 것 외에 통상적으로 처분시설의 설계는 위해폐기물 처분시설의 설계와 같다 극저준위폐기물 처분시설 2개소의 공학적 설계가 소개되었다.

• 한국분무공학회지
• /
• 제18권2호
• /
• pp.106-111
• /
• 2013

Adulterations fuel have been using in the vehicle in these days. Because gasoline, diesel prices are rising every day. so people find more cheap price fuel. Adulterations fuel caused a serious air pollution problems. Adulteration fuel were made from waste engine oil, waste paint. According to Government regulations permit to be used recycle fuel(adulteration fuel) only in industrial boiler. Unburned fuel pollutants are effected to human health. In this paper, the hazardous air pollutants characteristics in the diesel vehicles according to adulterations of vehicle fuels were carried out in the NEDC test mode in chassis dynamometer. It is revealed that the all of the regulation pollutants (THC, NOx, CO and PM) emission in the adulterations of vehicle fuels was increased also the green house gas, $CO_2$ was increased. In the hazardous air pollutants characteristics, the VOCs(Volitile Organic Compounds) BTEX(Benzene, Toluene, Ethylbenzene, Xylene) emissions in the adulterations of vehicle fuels showed higher level than these in the diesel fuels.

• 분석과학
• /
• 제14권6호
• /
• pp.516-521
• /
• 2001

본 연구는 우리나라 생활폐기물 대형소각시설(200톤/일 이상)에서 발생되는 바닥재중유해금속류의 용출저감을 위해 수행된 것이며, 주요 유해물질로는 납(Pb)과 구리(Cu)를 택하였다. 납의 용출저감을 위해서 공기접촉 산화처리방법을 사용한 결과, 납이 거의 검출되지 않을 정도의 저감효과를 나타내었으며 구리의 용추저감을 위한 방안에서는 물 세척법이 저감효과가 있는 것으로 나타났다. 또한, pH 변화에 따른 금속의 용출농도를 분석한 결과, 용출저감을 위한 안정적인 pH 범위는 7~12가 되어야함을 알 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제1권3호
• /
• pp.204-210
• /
• 2013

상동지역 중석광 광미의 품질 특성을 파악하기 위해 XRD 및 PSA를 사용하여 광물학적인 특성을 검토하였다. XRD분석 결과 상동지역 중석광 광미내에는 석영(quartz), 녹니석(chlorite), 회장석(anorthite) 그리고 코디에라이트(cordierite) 등이 함유되어 있는 것으로 파악되었다. 또한, 상동지역 중석광 광미의 용출 특성을 파악하기 위해 광미를 혼합한 모르터를 제작하여 KSLT의 규정에 의해 실험한 결과 폐기물 관리법 시행규칙에 제시된 유해물질 함유 기준값 보다 낮은 결과를 나타내었으며, 특히, 고루슬래그 미분말의 혼합률이 증가할수록 중금속의 농도는 감소함을 알 수 있다.

• 상하수도학회지
• /
• 제7권2호
• /
• pp.9-23
• /
• 1993

Emission of hazardous and volatile organic chemicals from solid waste landfill site was become to important issue because of environmental pollution and health risk by such chemicals. Laboratory batch and continuous experiments were conducted respectively to elucidate isothermal sorption behaviors and transport phenomena(by gas through unsaturated solid waste layer) in wet solid waste-gas system. Source separated and size reduced refuse(bulky waste) and incinerated ash were used after controlling water content, and trichloroethylene(TCE) was chosen among many such chemicals because of it's generality among those man-created pollutants. Isothermal TCE sorption equilibria wet solid waste-gas system can be described in linear equation and partition coefficient in this system can be estimated approximately by the simple equation derived from schematic structure of the system. Transport equation modified by instantaneous equilibrium sorption fraction and kinetic sorption rate(overall mass transfer capacity coefficient) simulated well the column experiment results.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.499-503
• /
• 2016

For safety and economy reasons, hazardous waste including radioactive waste is desired to be converted into stable waste forms with a maximum volume reduction. High temperature melting technology using a plasma torch system can effectively treat even the non-flammable waste as desired. By far, one of the most difficult process for melting the non-flammable waste is a tapping of melts because the melting point of a residual slag in the tapping hole is high and because the viscosity of the melt increases sharply when tapping out. In case of a stationary furnace with a slant tapping port on the side of furnace, a certain amount of melts is left in the tapping hole after tapping out. Because of this, at every end of a melting cycle, the tapping hole needs to be opened by tapping device. The developed tapping device of melts based on both a guide electrode and auxiliary electrode is adequate for the application to discharge of melts except that the consumption of the guide electrode is somewhat faster than expected. Melt is collected in the water cooled vessel.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권1호
• /
• pp.9-19
• /
• 1998

A laboratory study was conducted to investigate the immobilization of the laboratory waste sludge, mainly from chemical oxygen demand (COD) waste, using cementitious binders. The binders were: Ordinary Portland Cement (OPC), and lime-Rice Husk Ash(RHA) cement. The economic evaluation was done for three different kinds of cementitious binders, namely, OPC, Portalnd Rice Husk Ash Cement (PRHAC) which contained rice husk ash 50 percent by dry weight, and lime-RHA cement. The result showed that lime-RHA cement was the cheapest. The applicability of Freundlich's desorption isotherm was studied to assess the teachability of sludges. The teachability of cement mortars was found to follow the desorption isotherms. Therefore, it was concluded that based on this test, the leachate concentrations of the solidified heavy metals could be predicted, approximately by the Freundlich's isotherm desorption modeling.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.538-543
• /
• 2000

The purpose of this study is to develope electrostatic separation system for recycling of mixed waste plastics. The electrostatic separation system is designed and investigated the separation efficiency for separating of mixed waste plastics. Electrostatic separation system consisted of a tribocharger, separator (two electrode), collector (5 tray) and controller (positive/negative high voltage power supply). The tribocharger is a fluidized bed using tribo-electrification mechanism between particles and particles. In experimental results, the tribocharger of the fluidized bed was more effective separation efficiency. It showed the purity of $85{\sim}99\;%$ and the recovery of $80{\sim}98\;%$ from the powder of mixed plastics such as LDPE, HDPE, PP, PS, PET and PVC. Especially, In the separation experiment of Polyvinylchloride(PVC) which generates hazardous hydrogen chloride gas in case of the combustion. its purity was over 99 % and recovery was over 95 %.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.161-162
• /
• 2014

The subject of this study, Eco-friendly Polyurethane Waterproofing Membrane Coating of Exposed Type is manufactured by replacing environmental hazardous substance such as Toluene, Dioctyl Phthalate with Dimethyl Carbonate, waste-soybean oil. As part of existing filler is also replaced with waste-rubber chip and waste-soybean oil. As a result of environment friendly tests, in test of detection of VOCs case was contented with the Ministry of Environment standards at 5% below. Testing methods for heavy metal extracted was contented with standards for official wastes test method. So it is judged that environment friendly is secured.

• 한국환경과학회지
• /
• 제2권1호
• /
• pp.9.2-19
• /
• 1993

A laboratory study was conducted to investigate the immobilization of the laboratory waste sludge, mainly from chemical oxygen demand (COD) waste, using cementitious binders. The binders were: Ordinary Portland Cement (OPC), and lime-Rice Husk Ash (RHA) cement. The economic evaluation was done for three different kinds of cementitious binders, namely, OPC, Portaind Rice Husk Ash Cement (PRHAC) which contained rice husk ash U percent by dry weight, and lime-RHA cement. The result showed that lime-RHA cement was the cheapest. The applicability of Freundlich's desorption isotherm was studied to assess the teachability of sludges. The teachability of cement mortars was found to follow the desorption isotherms. Therefore, it was concluded that based on this test, the leachate concentrations of the solidified heavy metals could be predicted, approximately by the Freundlich's isotherm desorption modeling.