• Journal of Pharmacopuncture
• /
• v.23 no.2
• /
• pp.71-78
• /
• 2020

Objectives: This study was conducted to development of hazardous materials management standards for the decoction type of personalized herbal medicines (PHMs). Methods: This study was conducted in two stages. We searched documents about criteria to use words such as 'Herb', 'Herbal medicine', and 'Botanical Drug' and summarized the results. We organized the committee consisted of seven experts, and held two meetings to reach an agreement on hazardous management standards of the decoction type of PHMs. Results: The seven documents were presented in the literature review and six items related to hazardous management standards of decoction were identified. The second expert meeting brought that a total of six items, including heavy metal, pesticide residues, sulfur dioxide, benzopyrene, mycotoxin, and micro-organism limits, were selected for safety management of decoction type of PHMs. Also, the criteria and test methods for each standard were suggested for monitoring the decoction type of PHMs. Conclusion: The study suggested hazardous material management standards and criteria for the decoction types of PHMs. In the future, it would be necessary to conduct a pilot test to ensure the validity and credibility of the safety management standard and criteria. Furthermore, the government level safety management system should be introduced to verify the safety of decoction medicines.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.4
• /
• pp.57-72
• /
• 2016

There are more than 30,000 chemical substances handled in domestic university laboratories. Among them, hazardous materials are selected and managed as designated substances by the standards of 19 Ministries and 16 Acts. However, domestic safety-related laws and regulations are used to manage industrial risk factors based on industrial activities. In case of installing a university chemical laboratory in accordance with the installation standards applicable to general workplaces. It is not suitable to use as a laboratory installation standard that can be applied to a chemical laboratory installed at a university such as a problem occurs in applying to a university using a small quantity of dangerous substances in a small amount. In order to establish the laboratory structure and facility standards that are appropriate for the laboratory characteristics and apply systematic laboratory safety, the National Security Administration shall apply the special handling standard of chemical experiment to places where handling less than 30 times the designated quantity of chemical substances for chemical experiments. On August 2, 2016, the regulations for the enforcement of the Dangerous Goods Safety Management Act and the standards for the structure and facilities of the university chemical laboratory were enacted. In this study, we investigated the domestic chemical substances laws and regulations to determine the chemical substances that are over-regulated in the relevant laws, and define them as substances against accidents. The management criteria for the substances were analyzed. The R value for the designation of the designated quantity by the concept of the space in the management standard was calculated.

• Analytical Science and Technology
• /
• v.19 no.2
• /
• pp.172-180
• /
• 2006

This study was performed to establish new methods for hazardous substances and to develop an analytical method in specified wastes for preventing the environmental pollution caused by hazardous wastes. Therefore, the trends of international management, regulatory criteria, and items of hazardous wastes in various countries were investigated. Based on this study, target priority of new hazardous substances in specified wastes was established. An analytical method was developed using the waste standard reference materials of sludge, oil, bottom ash, etc., which contain the new hazardous substances (Ba, Be, Cr(VI), F, Ni, Sb, Se, and V). A total of 37 waste samples from the representative facilities, which are emitting new hazardous substances, were analyzed.

• Journal of the Korean Institute of Gas
• /
• v.22 no.4
• /
• pp.27-31
• /
• 2018

Classification of explosion hazard areas is very important in terms of cost and safety in the workplace handling flammable materials. This is because the radius of the hazardous area determines whether or not the explosion-proof equipment is installed in the electrical machinery and apparatus. From November 6, 2017, KS C IEC-60079-10-1: 2015 will be issued and applied as a new standard. It is important to understand and apply the difference between the existing standard and the new standard. Leakage coefficients and compression factors were added to the leakage calculation formula, and the formula of evaporation pool leakage, application of leakage ball size, and shape of explosion hazard area were applied. The range of the safety factor K has also been changed. Also, in the radius of the hazardous area, the existing standard applies the number of ventilation to the virtual volume, but the revised standard is calculated by using the leakage characteristic value. In this study, we investigated the differences from existing standards in terms of ventilation and dilution and examined the effect on the radius of the hazard area. Comparisons and analyzes were carried out by applying revised standards to workplaces where existing explosion hazard locations were selected. The results showed that even if the ventilation and dilution were successful, the risk radius was not substantially affected.

• Journal of Environmental Analysis, Health and Toxicology
• /
• v.21 no.4
• /
• pp.209-219
• /
• 2018

In the areas of RoHS, WEEE, ELV and REACH, reinforcement of environmental regulations against harmful substances is a global trend not only in EC but also in all over the world. In the fields of Korea's major export products such as material parts, electrical and electronic products and automobile parts, we are responding to these regulations consistently. To develop reference material for analyzing lead and cadmium in paints, the candidate materials were produced through the screening process which separated shapes and sizes. To secure the traceability of the candidate materials produced, the characteristics and uncertainties are estimated by ICP-AES analysis using the primary reference material. The short-term and long-term stabilities also are evaluated in parallel. In order to calculate the final certification value of the candidate material, the verification were carried out by the performance evaluation through the comparison among the KOLAS (Korea Laboratory Accreditation Scheme) laboratories, and the CRM was produced in accordance with ISO Guide 35. The certified values and uncertainties of Pb and Cd of the final paint standard, determined according to the joint analysis among laboratories, are Pb [($191.4{\pm}3.1$) mg/kg, ($944.1{\pm}5.6$) mg/kg] and Cd [($45.0{\pm}2.6$) mg/kg, ($225.5{\pm}3.5$) mg/kg]. These standard materials were developed to enhance the reliability of measurement analysis, including the validity and traceability of measurement results. Also it is expected that the CRM will be used as QCM (quality control material) for the product design and the process monitoring, so that regulation and management of hazardous heavy metals can be systematically implemented.

• Journal of Mushroom
• /
• v.20 no.1
• /
• pp.22-28
• /
• 2022

In order to provide basic data for preparing management standards and to verify the safety of the Chinese oak mushroom-derived moisturizing medium-which is synthesized and imported in large quantities-the presence of 321 residual pesticides, 7 heavy metals, and 3 radioactive materials was analyzed in the moisturizer samples. Examination of residual pesticides in seven moisturizing medium samples prepared using the Chinese oak mushroom and three domestic sawdust samples used for mushroom culture revealed the presence of cypermethrin and iprodione in three moisturizer samples, but the contents of these pesticides were below the standard limits. Zn was detected in ten samples, Cu was detected in nine samples, and Ni was detected in four samples, but their contents were below the standard limits. Pb, Cd, Cr, and Hg were not detected in any sample. No radioactive materials were detected in the samples. In addition, fruiting bodies of the oak mushroom were observed in each medium. Examination did not reveal the presence of any residual pesticides or harmful compounds. In this study, the use of the moisturizing medium prepared using the Chinese oak mushroom was found to be safe. As residual pesticides, heavy metals, and radioactivity-even in trace amounts-remain concentrated in the human body, continuous verification of the safety of hazardous substances and pollutants during the systematic cultivation and management of these mushrooms is required.

• Korean journal of food and cookery science
• /
• v.30 no.6
• /
• pp.774-784
• /
• 2014

The purpose of this study was to present management guidelines for critical control points by analyzing microbiological hazardous elements through screening Potentially Hazardous Foods (PHF) menus in an effort improve the microbiological quality of foods prepared by restaurant operations. Steamed spinach with seasoning left at room temperature presents a range of risk temperatures which microorganisms could flourish, and it exceeded all microbiological safety limits in our study. On the other hand, steamed spinach with seasoning stored in a refrigerator had Aerobic Plate Counts of $2.86{\pm}0.5{\log}\;CFU/g$ and all other microbiological tests showed that their levels were below the limit. The standard plate counts of raw materials of lettuce and tomato were $4.66{\pm}0.4{\log}\;CFU/g$ and $3.08{\pm}0.4{\log}\;CFU/g$, respectively. Upon washing, the standard plate counts were $3.12{\pm}0.6{\log}\;CFU/g$ and $2.10{\pm}0.3{\log}\;CFU/g$, respectively, but upon washing after chlorination, those were $2.23{\pm}0.3{\log}\;CFU/g$ and $0.72{\pm}0.7{\log}\;CFU/g$, respectively. The standard plate counts of baby greens, radicchio and leek were $6.02{\pm}0.5{\log}\;CFU/g$, $5.76{\pm}0.1{\log}\;CFU/g$ and $6.83{\pm}0.5{\log}\;CFU/g$, respectively. After 5 minutes of chlorination, the standard plate counts were $4.10{\pm}0.6{\log}\;CFU/g$, $5.14{\pm}0.1{\log}\;CFU/g$ and $5.30{\pm}0.3{\log}\;CFU/g$, respectively. After 10 minutes of chlorination treatment, the standard plate counts were $2.58{\pm}0.3{\log}\;CFU/g$, $4.27{\pm}0.6{\log}\;CFU/g$, and $4.18{\pm}0.5{\log}\;CFU/g$, respectively. The microbial levels decreased as the time of chlorination increased. This study showed that the microbiological quality of foods was improved with the proper practices of time-temperature control, sanitization control, seasoning control, and personal and surface sanitization control. It also presents management guidelines for the control of potentially hazardous foods at the critical control points in the process of restaurant operations.

• Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.14-27
• /
• 2006

The proper management of discarded electronic devices (often called electronic-waste) is an emerging issue for solid waste professionals throughout the world because of the large growth of the waste stream, and the content of toxic metals in them, most notably heavy metals such as lead. Notebook computers are becoming one of the major components of discarded computer devices and will continue to increase in the waste stream in the future. While the computers hold great promise for recycling, a substantial amount of this waste is often disposed in municipal solid waste (MSW) landfills. The toxicity characteristic leaching procedure (TCLP) is commonly used to simulate worse case leaching conditions where a potentially hazardous waste is assumed to be disposed along with municipal solid waste in a landfill with actively decomposing materials overlying an aquifer. The objective of this study was to examine leaching potential of lead from discarded notebook computers using the scale-up TCLP, other standard leaching tests such as California waste extraction test (Cal WET), and the synthetic precipitation leaching procedure (SPLP) and actual landfill leachates as leaching solution. The scale-up TCLP is a modified TCLP (where the device was disassembled and leached in or near entirety) to meet the intent of the TCLP. The results showed that the scale-up TCLP resulted in relatively high lead found in the leachate with an average of 23.3 mg/L. The average level was less than those by the standard TCLP and WET (37.0 mg/L and 86.0 mg/L, respectively), but much greater than those by the SPLP and the extractions with the landfill leachates (0.55 mg/L and 1.47 mg/L, respectively). The pH of the leaching solution and the ability of the organic acids in the TCLP and WET to complex with the lead were identified as major factors that controlled the amount of lead leached from notebook computers. Based on the results obtained by a number of leaching tests in this study, notebook computers may present a potential leaching risk to the environment and human health upon land disposal. However, further investigation is still needed to assess the true risk posed by the land disposal of discarded notebook computers.

• Journal of Mushroom
• /
• v.19 no.4
• /
• pp.294-299
• /
• 2021

The purpose of this study is to provide basic data on the safety of Poria cocos, a major Korean herbal medicine, and to establish tolerance levels for hazardous substances. Residual pesticides (321 types), heavy metals (7 types), radioactivity (3 types), and ash content were analyzed in 10 Poria cocos products distributed in Korea (5 domestic and 5 in China). Of the residual pesticides, cypermethrin was detected at 0.03 mg/kg in one domestic sample and was below the standard value. Of the heavy metals, the levels of Zn, Pb, Ni, Cu, Hg, and Cr were below the standard values in all samples. Hg was not detected in any sample. Cd was detected at 0.011 mg/kg in one Chinese sample. The radioactivity concentration was also below the MDA value in all P. cocos samples. The ash content was less than the standard value of 1.0% in all P. cocos samples. The findings indicate that P. cocos distributed in Korea is safe. However, because P. cocos is always exposed to harmful substances because of the nature of its cultivation in the soil, it seems necessary to establish systematic management standards for the entire production stage, such as cultivation, storage, and distribution.

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.1-12
• /
• 2019

In this study, TI(Toxic Index) of Daphnia toximeter corresponded to ecological toxicity standard 1 TU(Toxic Unit) was set up using Daphnia toximeter and when operating NOEC(water quality standards for drinking water) and $EC_{50}$ Daphnia toximeter alarm was issued appropriately, which enables real time ecological toxicity evaluation. I studied to get a good shot and the research was conducted by investigating domestic and international related data and conducting a preliminary study. 6 of 59 hazardous substances (As, Hg, Cr, Diazinon, Dioxane, and Phenol) recommended by the water quality monitoring items for artificial river water were selected and static, dynamic and quality management test, TI was shown to be good in other materials except Diazinon, and as a result of $EC_{50}$ spiking test, TI was matched to TU by distinguishing between 1 TU and 1 TU. in suggesting the complementary point of ecological toxicity management system and the future of research on water Daphnia toximeter.