• 제목/요약/키워드: hazardous gas

검색결과 347건 처리시간 0.025초

공기보다 가벼운 가스 사용시설의 폭발위험장소 설정방안에 대한 연구 (A Study on Classification of Explosion Hazardous Area for Facilities using Lighter-than-Air Gases)

  • 임지표;정창복
    • 한국안전학회지
    • /
    • 제29권2호
    • /
    • pp.24-30
    • /
    • 2014
  • There have been controversies over whether explosion hazardous area(EHA) should be classified for facilities which use lighter-than-air gases such as city gas, hydrogen and ammonia. Two view points are confronting each other: an economic piont of view that these gases are lighter than air and disperse rapidly, hence do not form EHA upon release into the atmosphere, and a safety point of view that they are also inflammable gases, hence can form EHA although the extent is limited compared to heavy gases. But various standards such as KS, IEC, API, NFPA do not exclude light gases when classifying EHA and present examples of EHA for light gas facilities. This study calculates EHA using the hypothetical volume in the IEC code where the hole sizes required for the calculation were selected according to various nominal pipe sizes in such a way to conform to the EHA data in the API code and HSL. Then, 25 leakage scenarios were suggested for 5 different pipe sizes and 5 operating pressures that cover typical operating conditions of light gas facilities. The EHA for the minimum leakage scenario(25 mm pipe, 0.01MPa pressure) was found to correspond to a hypothetical volume larger than 0.1 $m^3$(medium-level ventilation). This confirms the validity of classifying EHA for facilities using lighter-than-air gases. Finally, a computer program called HACPL was developed for easy use by light gas facilities that classifies EHA according to operating pressures and pipe sizes.

위험물 저장시설의 무기질 바닥마감재와 이를 이용한 시공방법에 관한 연구 (A Study on Development and Construction Methods of the Inorganic Floor Finishing Material of Hazardous Material Storage Facilities)

  • 오동석;유철희;김병덕;김흠;박상민
    • 한국가스학회지
    • /
    • 제18권4호
    • /
    • pp.35-43
    • /
    • 2014
  • 무기질 바닥마감재로 기존 위험물 저장시설의 유기질계 바닥재의 문제점을 극복할 수 있다. 하지만 기존 시공된 바닥재를 제거하는데 있어서 제거기와 바닥재의 물리적 충돌에 의해 불꽃이 발생될 수 있다. 이러한 위험물 저장시설에서의 폭발에 의한 화재가 발생할 수 있는 위험요소를 억제하도록 기존 바닥재를 제거하지 않고 시공할 수 있다. 또한, 상도제는 대전방지제가 함유되어 있어 위험물 저장시설에 있어서 바닥마감재 시공 후 발생될 수 있는 정전기에 의한 2차적 피해를 억제 할 수 있어 효과적이다. 따라서 본 연구에서 개발된 무기질 바닥마감재는 점검자의 안전 관리적 측면과 경제적 측면에 효과가 있을 것으로 기대된다.

전산유체역학시뮬레이션을 이용한 도시가스 설비의 폭발위험성 예측 (Prediction of Explosion Risk for Natural Gas Facilities using Computational Fluid Dynamics (CFD))

  • 한상일;이동욱;황규석
    • 한국응용과학기술학회지
    • /
    • 제35권3호
    • /
    • pp.606-611
    • /
    • 2018
  • 산업현장과 열병합발전 등 다양한 장소에 사용되는 도시가스는 산업안전보건법 정의에 따라 인화성 가스에 해당되며 한국산업표준 KS C IEC에 의해 가스 폭발위험장소가 설정되어 안전하게 관리가 되어야 한다. 본 연구에서는 일반 화학공장에 적용되는 KS C IEC 표준을 저압 도시가스 사용설비 폭발위험성 예측에 합리적으로 적용하기 위해누출공 크기, 환기 등급, 환기 유효성 등의 주요 변수를 도입하였다.CFD 시뮬레이션 적용의 타당성을 평가하기 위해 전산유체역학 (CFD) 시뮬레이션, 가스누출실험, KS C IEC 표준 계산 통해 얻어진 폭발하한계가상 체적을 이용하여 네 가지 다른 조건에서 폭발 위험성을 평가하였다.

독성가스 제거용 기포탑 반응기의 설계기법 (Design Parameters Estimations for Bubble Column Reactors to Remove Toxic Gases)

  • 오정환;홍민선
    • 한국위험물학회지
    • /
    • 제6권2호
    • /
    • pp.95-104
    • /
    • 2018
  • Gas-liquid bubble column reactors are extensively used in industrial processes. A detailed knowledge of bubble size distribution is needed for determining the mass transfer in gas-liquid film. Experimental data on bubble size distribution and liquid-side mass transfer coefficient($k_L$) were used to calculate the estimated time to saturation in bubble column reactor. Also, the gas flux was evaluated to the liquid-side mass transfer coefficient($k_L$) and solubility data for hydrogen sulfide($H_2S$) and chlorine($Cl_2$) absorption into water. Simulation results show that $H_2S$ absorption time to 50 % of saturation concentrations are 611 sec and 1,329 sec when bubble diameters are 0.5 mm and 4.5 mm, while absorbing 1 % $H_2S$ gas. In case of $Cl_2$, absorption time range 657 to 1,400 sec when bubble size range 0.5 mm to 4.5 mm, while absorbing 1 % $Cl_2$ gas. Calculated simulation results can be used in the design of emergency relief bubble reactors.

딥러닝(CNN)기반 저해상도 IR이미지 분석을 통한 작업자 인식 (Deep Learning(CNN) based Worker Detection on Infrared Radiation Image Analysis)

  • 오원식;이우귀연;오정석
    • 한국가스학회지
    • /
    • 제22권6호
    • /
    • pp.8-15
    • /
    • 2018
  • 플랜트 내 위험지역의 안전을 위해 작업자 중심의 안전관리가 필요하다. 최근 5년간 가스 사고의 원인은 시설 노후 및 장비고장 뿐만 아니라, 사용자의 취급부주의나 고의사고, 공급자 취급부주의 등 작업자의 행동에 밀접한 관련이 있다. 이와 같은 사고를 미연에 방지하기 위해서, 플랜트 내 위험지역에 대한 실시간 모니터링이 필요로 하다. 하지만 실시간 모니터링을 위해서 작업(근로)공간에 카메라 설치 시, 인권침해와 같은 문제가 발생한다. 이를 방지하기 위해서 작업자의 신원 노출이 적은 저해상도의 Infrared 카메라를 이용한다. 또한 실시간 모니터링 시, 사람이 아닌 CNN알고리즘을 이용하여 이미지 분석을 통하여 인권침해 문제를 예방한다.

복합 유해 가스 센서 기반의 조기 경보 시스템을 위한 재난 전조 감시 기준에 관한 연구 (A Study on the Monitoring Criteria of Disaster Signs for Early-warning System based on Multiple Hazardous Gas Sensor)

  • 한규상;박소순;윤인섭
    • 한국가스학회지
    • /
    • 제17권2호
    • /
    • pp.28-35
    • /
    • 2013
  • 대도시 내에 밀집하여 증가하고 있는 대형 복합 건축물은 그 규모와 복잡성으로 인해 유해가스 관련 사고발생시 대형 재난으로의 확대 가능성이 상존한다. 이에 대한 대응책으로, 다종의 유해가스를 감지하는 복합 가스 센서와 이로부터 수집한 정보를 활용한 조기 경보 시스템이 연구되고 있다. 이와 같은 센서 기반 재난 전조 감시 시스템의 효과적인 적용과 운영을 위해서는 적합한 기준이 먼저 마련되어야 한다. 본 연구에서는 유해가스의 감지와 조기 경보 발령을 위한 경보 기준 농도를 제시하고, 각 경보 단계별로 대응 활동과 정보 전파 등 재난 대응 체계를 제안하였다. 재난 감시 기준을 통해 유해가스 관련사고 발생 시 조기에 위험을 감지하여 사고의 경과에 따라 효과적인 대응을 이끌어 낼 수 있다.

물질특성 및 운전조건을 고려한 증기상 물질의 2차 누출에 따른 폭발위험장소 범위 선정에 관한 연구 (A Study on Determination of Range of Hazardous Area Caused by the Secondary Grade of Release of Vapor Substances Considering Material Characteristic and Operating Condition)

  • 서민수;김기석;황용우;천영우
    • 한국가스학회지
    • /
    • 제22권4호
    • /
    • pp.13-26
    • /
    • 2018
  • 현재 KS Code 등 국내규정에서는 폭발위험장소의 범위를 계산하는 방법이 명확하게 나타나지 않아, 정확한 범위 선정을 위해서는 확산 모델링 해석을 이용하여야 한다. 본 연구애서는 대표적인 물질과 운전조건을 활용하여 확산 모델링에 비하여 간편하면서도 비교적 합리적인 폭발위험장소의 범위를 산정하는 방법을 제시하고자 하였다. 현재 시행되고 있는 국내외 표준을 바탕으로 폭발하한계(LFL, Lower Flammable Limit)까지 거리에 영향을 미치는 변수를 선정하였다. 총 16종의 인화성물질을 대상으로 물질변수, 운전변수, 기상조건에 대하여 모델링을 진행하였으며, 통계분석을 통해 영향을 미치는 변수를 선별하였다. 선별된 변수를 이용하여 폭발위험장소의 범위 선정을 위한 3단계 분류화 방법(3Step Classification Method)을 작성하였다.

연소배가스로부터 가스상 수은 처리기술 (Gas-Phase Mercury Control Technology from Flue Gas)

  • 이시훈
    • 에너지공학
    • /
    • 제12권2호
    • /
    • pp.65-73
    • /
    • 2003
  • 국내의 HAPs(Hazardous Air Pollutants)중 수은은 아직까지 관심의 대상이 아니지만 머지않아 문제가 될 것으로 예측된다. 본 논문에서는 현재 국내외의 배가스 수은 배출현황과 처리기술에 대해 요약하였다. 미국을 중심으로 구미 각국에서는 대기분야의 연구개발이 수은에 집중되고 있다. 수은 제어 프로그램은 크게 두 가지로 방향을 잡고 있다. 하나는 기존의 WFGD(Wet Flue Gas Desulfurization)를 이용하여 수은을 산화시켜 제거하는 방법이며 다른 하나는 수은 제거효율이 높은 활성탄 또는 다른 novel sorbent (low-cost sorbent)를 사용하는 방법이다. 선진국에서는 2007년에 발전소 수은 제거설비 설치가 의무화 될 것이다. 본 논문에서 제공하는 자료는 국내에서 발전소 수은 규제가 시작될 때 효과적으로 적용될 수 있을 것이다.

수소 취급설비의 누출원에 인접한 방폭전기기기의 가스그룹 IIC 기기 회피 방안에 관한 연구 (A Study on the Method to Avoid the Gas Group IIC Equipment of Explosion Proof Electrical Equipment Adjacent to the Source of Release of Hydrogen Handling Facility)

  • 변윤섭
    • 한국수소및신에너지학회논문집
    • /
    • 제33권4호
    • /
    • pp.383-390
    • /
    • 2022
  • Appropriate explosion proof electrical equipment should be installed in hazardous areas. In areas where hydrogen is handled, explosion proof electrical equipment adjacent to the hydrogen handing facility must be reviewed for selection of gas group IIC (or IIB+H2) equipment. When selecting explosion proof electrical equipment for the flammable substance handling facility in areas where hydrogen and flammable substance are handled, the method to avoid gas group IIC (or IIB+H2) equipment has been suggested by using the operating pressure of the hydrogen handling facility. When the operating pressure of the outdoor hydrogen handling facility is 1.065 MPa or less, it has been confirmed that there is no need to install gas group IIC (or IIB+H2) equipment for the flammable substance handling facility adjacent to the hydrogen handling facility. And the method of selecting explosion proof electrical equipment for the flammable substance handling facility has been suggested as a flowchart, so it will be able to be utilized when selecting appropriate explosion proof electrical equipment.

친환경 도금표면처리 기술동향 (Technical Trend of Plating & Surface Treatment for Eco-environment)

  • 강계명;김유상
    • 한국표면공학회지
    • /
    • 제42권6호
    • /
    • pp.301-310
    • /
    • 2009
  • Recently, it has been increasing for the eco-environment plating and surface treatment of eco-environment to decrease hazardous materials. Particular eco-environment can be applied to electronics or automotive parts of industry. In the case of mobile phone, if there were fired, the products bearing dye may be contaminated with the hazardous and wasted. we can obtain the original metal color by electro coloring by metal salt, get rid of hazardous gas, decrease the wasted sludges. Now, the industrial patent number is increasing in Korea, we can accomplish the development of green industry by supporting technical trend of the plating and surface treatment in eco-environment.