• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.2
• /
• pp.179-188
• /
• 2009

WIG crafts are a high speed vessel with features of dynamic supported craft. These crafts, which are predominantly of light weight and operate any substantially greater speeds than conventional craft such as bulk carrier, tanker, container ship, etc., could not be accommodated under traditional maritime safety instruments. It means that there is the need for risk and safety levels to be assessed on a holistic basis, recognizing that high levels of operator training, comprehensive and thoroughly implemented procedures, high levels of automation and sophisticated software can all make significant contributions to risk reduction. To response this requirement, the Interim Guideline for WIG craft(MSC/Circ.1054) were developed in the view of the configuration of WIG craft, which fall between the maritime and aviation regulatory regimes. This paper reviews a safety assessment process and methodology to be used in the design phase of a new ship. The process and methodology is based on the risk-based approach and is applied to safety assessment in concept development phase of small WIG craft in the 20-person class.

• Geomechanics and Engineering
• /
• v.21 no.4
• /
• pp.327-336
• /
• 2020

Conventional researches on the behavior of fiber-reinforced and unreinforced soils often investigated the failure point. In this study, a concept is proposed in the comparison of the fiber-reinforced with unreinforced sand, by estimating the strength and strength ratio at different levels of strain. A comprehensive program of laboratory drained triaxial compression test was performed on compacted sand specimens, with and without date palm fiber. The fiber inclusion used in triaxial test specimens was form 0.25%-1.0% of the sand dry weight. The effect of the fiber inclusion and confining pressure at 0.5%, 1.0%, 1.5%, 3.0%, 6.0%, 9.0%, 12%, and 15% of the imposed strain levels on the specimen were considered and described. The results showed that, the trend and magnitude of the strength ratio is different for various strain levels. It also implies that, using failure strength from peak point or the strength corresponding to the axial strain of approximately 15% for evaluating the enhancement of strength or strength ratio, due to the reinforcement, may cause hazard and uncertainty in practical design. Therefore, it is necessary to consider the strength of fiber-reinforced specimen at the imposed strain level, compared to the unreinforced specimen.

• Steel and Composite Structures
• /
• v.37 no.6
• /
• pp.679-693
• /
• 2020

This paper investigates the seismic response of buildings equipped with Self-Centering Energy Dissipating (SCED) braces. Two-dimensional models of 3, 6, 12 and 16-story SCED buildings considering both material and geometric nonlinearities are investigated by carrying out pushover and nonlinear time-history analyses. The response indicators of the buildings are studied for weight-scaled ground motions to represent the Design Basis Earthquake (DBE) level and the Maximum Considered Earthquake (MCE) event. The fragility curves of the buildings for two Immediate Occupancy (IO) and Life Safety (LS) performance levels are developed using Incremental Dynamic Analysis (IDA). Results of the nonlinear response history analyses indicate that the maximum inter-story drift occurs at the taller buildings. The mean peak inter-story drift is less than 2% in both hazard levels. High floor acceleration peaks are observed in all the SCED frames regardless of the building height. The overall ductility and ductility demand increase when the number of stories reduces. The results also showed the residual displacement is negligible for all of case study buildings. The 3 and 6-story buildings exhibit desirable performance in IO and LS performance levels according to fragility curves results, while 12 and 16-story frames show poor performance especially in IO level. The results indicated the SCED braces performance is generally better in lower-rise buildings.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.6
• /
• pp.293-301
• /
• 2023

Existing reinforced concrete buildings with seismically deficient details have premature failure under earthquake loads. The fiber-reinforced polymer column jacket enhances the lateral resisting capacities with additional confining pressures. This paper aims to quantify the retrofit effect varying the confinement and stiffness-related parameters under three earthquake scenarios and establish the retrofit strategy. The retrofit effects were estimated by comparing energy demands between non-retrofitted and retrofitted conditions. The retrofit design parameters are determined considering seismic hazard levels to maximize the retrofit effects. The critical parameters of the retrofit system were determined by the confinement-related parameters at moderate and high seismic levels and the stiffness-related parameters at low seismic levels.

• Korean Journal of Food Science and Technology
• /
• v.43 no.1
• /
• pp.39-44
• /
• 2011

This study was carried out to examine microbiological contamination of ready-to-eat products and to propose a draft-standard and specifications according to food types. RTE foods were classified into 6 groups including fish products, meat products, breads, rices, salads, and fresh cut foods. The prevalence rates of pathogens detected from all samples were compared among food categories. The pH ranges for all RTE samples were between 3.8 and 7.3. Total aerobic cell counts ranged from 2 to 6 log CFU/g. Bread, rice and fresh-cut foods showed significantly higher counts, which ranged above 4.0 log CFU/g among the samples. Two kinds of rice were above the level of the KFDA Food Code standard for Eschrichia coli. The prevalence rate of E. coli in the rice was 6.7%. For Staphylococcus aureus, one fish product and one bread-product had levels above 2 log CFU/g. Bacillus cereus counts for all samples were below the level of 3 log CFU/g. Listeria monocytogenes was not detected in the samples. Therefore, these data suggest that the primary microbial hazard factors for ready-to-eat foods and risk assessments should focus on E. coli, S. aureus, and B. cereus.

• Earthquakes and Structures
• /
• v.22 no.6
• /
• pp.561-570
• /
• 2022

It is of great importance to be able to evaluate different structural systems not only based on their seismic performance but also considering their lifetime service costs. Many structural systems exist that can meet the engineering requirements for different performance levels; therefore, these systems shall be selected based on their economic costs over time. In this paper, two structural systems, including special steel moment-resisting and the ordinary concentric braced frames, are considered, which are designed to meet the three performance levels: Immediate Occupancy (IO), Life Safety (LS), Collapse Prevention (CP). The seismic behavior of these two systems is studied under three strong ground motions (i.e., Tabas, Bam, Kajour earthquake records) using the Perform3D package, and the incurred damages to the studied systems are examined at two hazard levels. Economic analyses were performed to determine the most economical structural system to meet the specified performance level requirements, considering the initial cost and costs associated with damages of an earthquake that occurred during their lifetime. In essence, the economic lifetime study results show that the special moment-resisting frames at IO and LS performance levels are at least 20% more economical than braced frames. The result of the study for these building systems with different heights designed for different performance levels also shows it is more economical from the perspective of long-term ownership of the property to design for higher performance levels even though the initial construction cost is higher.

• Korean Circulation Journal
• /
• v.53 no.10
• /
• pp.710-719
• /
• 2023

Background and Objectives: In previous studies, high homocysteine levels were associated with high cardiovascular mortality. However, these results were inconsistent with those of randomized controlled trials. We aimed to evaluate the causal role of homocysteine on allcause and cardiovascular mortality using Mendelian randomization (MR) analysis. Methods: This study included the 10,005 participants in the Namwon Study. In conventional observational analysis, age, sex, survey years, lifestyles, body mass index, comorbidities, and serum folate level were adjusted using multivariate Cox proportional regression. MR using 2-stage least squares regression was used to evaluate the association between genetically predicted plasma homocysteine levels and mortality. Age, sex, and survey years were adjusted for each stage. The methylenetetrahydrofolate reductase (MTHFR) polymorphism was used as an instrumental variable for predicting plasma homocysteine levels. Results: Observed homocysteine levels were positively associated with all-cause (hazard ratio [HR], 1.40; 95% confidence interval [CI], 1.26-1.54) and cardiovascular (HR, 1.62; 95% CI, 1.28-2.06) mortality when plasma homocysteine levels doubled. However, these associations were not significant in MR analysis. The HRs of doubling genetically predicted plasma homocysteine levels for all-cause and cardiovascular mortality were 0.99 (95% CI, 0.62-1.57) and 1.76 (95% CI, 0.54-5.77), respectively. Conclusions: This MR analysis did not support a causal role for elevated plasma homocysteine concentrations in premature deaths.

• Journal of Dairy Science and Biotechnology
• /
• v.27 no.1
• /
• pp.1-12
• /
• 2009

In 2008, baby formula containing melamine was found to be responsible for a large outbreak of renal failure in infants in China. A total of 294,000 infants were hospitalized, and at least 6 babies died due to ingestion of the tainted formula. Melamine contains high levels of nitrogen (>60%), which is used as an indicator of protein content. Therefore, high levels of melamine in infant formula were thought to be the result of deliberate contamination m an attempt to increase its apparent protein content. Following inspections by China's national inspection agency, assorted products from at least 22 dairy manufacturers across China were found to have varied levels of melamine (range: 0.096196.61 mg/kg). Melamine co-exposure with cyanuric acid can induce acute melamine-cyanurate crystal nephropathy, which can lead to renal failure at much lower doses than if either compound were ingested alone. However, currently, there are very few data on melamine analogues other than cyanuric acid. At an expert meeting of the WHO and FAO held to review toxicological aspects of melamine and cyanuric acid on December 14, 2008, a new tolerable daily intake (TDI) of melamine was established that could be applied to the entire population, including infants. Therefore, a risk assessment of the various theoretical melamine contamination levels in infant formula and selected representative foods (other than infant formula and sole-source nutrition products) is urgently needed for Korean babies and children up to 7 years of age. Although the undetectable level regulation for infant formula may be low enough to guarantee the safety of babies under the age of 1 year (including premature babies), the melamine standard of 2.5 ppm for foods other than baby formula could be insufficient to protect the 95th percentile population aged 1~2 years because of this demographic's high consumption of milk, yogurt, and soy milk (hazard index = 1.79). Because TDIs are chronic values intended to protect an individual over his/her lifetime, occasional modest ingestion in excess of the TDI is not likely to be a health concern. However, children aged 1~2 years may have renal systems that are comparatively more sensitive to the crystallization of melamine and its analogues. Therefore, governmental jurisdictions may need to practice more prudent management of food items that could raise the melamine exposure for this population.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.3
• /
• pp.245-256
• /
• 2017

Objectives: The present study is aimed at performing real-time measurement of fibrous materials using an F-1 fiber monitor, investigating the correlations between the measurements and environmental conditions, and assessing the feasibility of the use of the monitor in actual exposure assessments based on the accuracy and reliability of the device. Methods: Asbestos specimens with a fixed asbestos content were dispersed in a chamber and collected with a particle measuring test device. Measurements obtained by the existing PCM method, and with the F-1 fiber monitor were compared. In addition, concentrations of asbestos fibers obtained by the PCM method, the TEM method, and the F-1 fiber monitor were compared with that of specific ABS scenarios in NOA regions. Correlations of asbestos contents in soil and weather conditions with each method of measurement were analyzed. Results: Laboratory results showed that levels of asbestos fibers measured with each method increased as fiber contents in soil increased. In the accuracy and reproducibility assessment, no significant differences were found between the different methods of measurement. On-site assessment results showed positive correlations among the methods, and these correlations were less significant compared with what was shown by the laboratory results. Levels of asbestos fibers increased as asbestos contents in soil increased, and as temperature increased. Levels of asbestos fibers decreased as humidity increased, and wind speed did not significantly affect the extent to which asbestos fibers were scattered. Conclusions: While it would be premature to replace existing methods with the use of F-1 fiber monitors in real sites based on the results of this study, the monitor may be useful in the screening of the sites, which assesses hazard levels in different regions. Replacement of existing methods with the use of F-1 fiber monitors may be possible after the limitations identified in this study are overcome, and additional assessment data are obtained and reviewed under different conditions to confirm the reliability of the monitor in future research. Obtained assessment results may be used as basic data for the assessment of asbestos hazard in NOA regions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.10
• /
• pp.1457-1465
• /
• 2009

This study was conducted to analyze the food safety management practices and to provide data that could be used to improve food safety management at kindergarten foodservice establishments in Daegu and Gyeongbuk province. Microbiological hazard analysis was conducted from May to July, 2008 at the four foodservice establishments. A total (20 items) of foodservice facilities, cooking utensils, and equipment were tested about total plate counts, coliforms, E. coli, Staphylococcus aureus, Salmonella spp., and Listeria monocytogenes. The microbiological detected levels were higher than the critical limits for prepreparing and cooking knives, chopping boards, working tables (both prepreparing and cooking), refrigerator (inside wall), bart, basket, and tray. E. coli, Salmonella spp., and Listeria monocytogens were not detected in any samples. However, Staphylococcus aureus were detected in rubber gloves for cooking and trench in the bottom at one foodservice establishment. In conclusion, these results suggest that a prerequisite programs guideline should be provided to improve the food safety levels at kindergarten foodservice establishments and the foodservice manager must maintain proper food safety technique for foodservice facilities, cooking utensils, and equipment at kindergarten foodservice establishments to prevent cross-contamination and spread of foodborne pathogens.