• 대한의용생체공학회:의공학회지
• /
• 제30권2호
• /
• pp.179-184
• /
• 2009

Magnetic Resonance Electrical Impedance Tomography (MREIT) is a new bio-imaging modality providing cross-sectional conductivity images from measurements of internal magnetic flux densities produced by externally injected currents. Recent MREIT studies demonstrated successful conductivity image reconstructions of postmortem and in vivo canine brain. However, the whole head imaging was not achieved due to technical issues related with electrodes and noise in measured magnetic flux density data. In this study, we used a new carbon-hydrogel electrode with a large contact area and injected 30 mA imaging current through a canine head. Using a 3T MREIT system, we performed a postmortem canine experiment and produced high-resolution conductivity images of the entire canine head. Collecting magnetic flux density data inside the head subject to multiple injection currents, we reconstructed cross-sectional conductivity images using the harmonic $B_z$ algorithm. The conductivity images of the canine head show a good contrast not only inside the brain region including white and gray matter but also outside the brain region including the skull, temporalis muscle, mandible, lingualis proprius muscle, and masseter muscle.

• Journal of Magnetics
• /
• 제20권3호
• /
• pp.273-283
• /
• 2015

In this study, we propose an analytical model for studying magnetic fields in radial-flux permanent-magnet eddy-current couplings by considering the effects of slots and iron-core protrusions on the eddy currents. We focus on the analytical prediction of the air-gap field by considering the influence of eddy currents induced in conducting bars. In the proposed model, the permanent magnet region is treated as the source of a time-varying magnetic field and the moving-conductor eddy current problem is solved based on the resolution of time-harmonic Helmholtz equations. The spatial harmonics in the air gap and in slots, as well as the time harmonics are all considered in the analytical calculation. Based on the proposed field model, the electromagnetic torque is computed by using the Maxwell stress tensor method. Nonlinear finite element analysis is performed to validate the analytical model. The proposed model can be used for permanent-magnet eddy-current couplings with any slot-pole combination.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1090-1100
• /
• 2017

This paper presents the comparison of starting current characteristics of a three-phase induction motor fed by two types of soft starters. The first soft starter under investigation is a conventional AC voltage controller on the basis of a phase-control technique. The other is the proposed asynchronous PWM AC chopper which is developed from the conventional synchronous PWM AC chopper. In this paper, the proposed asynchronous PWM AC chopper control scheme is developed by generating only two asynchronous PWM signals for a three-phase main power circuit (6 switching devices) from a single voltage control signal which is compared with a single sawtooth carrier signal. By this approach, the PWM signals are independent and easy to implement since the PWM signals do not need to be synchronized with a three-phase voltage source. Details of both soft starters are discussed. The experimental and simulation results of the starting currents are shown. It is found that the asynchronous PWM AC chopper efficiently works as a suitable soft starter for the three-phase induction motor due to that the starting currents are reduced and are sinusoidal with less harmonic contents, when being compared with the starting current waveforms using the conventional phase-control starting technique. Also the proposed soft starter offers low starting electromagnetic torque pulsation.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1545-1554
• /
• 2018

This paper proposes a modified control strategy to improve the performance of three-phase four-leg shunt active power filters (APFs) for the compensation of three phase unbalanced loads. Unbalanced current cannot be obtained accurately by a harmonic detector due to the lower frequency. The proposed control strategy eliminates conventional harmonic detectors by directly regulating the source current. Therefore, the computational complexity is greatly reduced and the performance of the APF is improved. A mathematic model has been developed based on the source currents. The corresponding controllers have been designed based on the sinusoidal internal model principle. The proposed control strategy can guarantee excellent compensation performance and stable operation after an extreme disturbance such as a short circuit fault. In addition, the proposed technique can selectively compensate specific harmonics. A 50kVA prototype APF is implemented in the laboratory to validate the feasibility and performance of the proposed control strategy.

• 한국지구과학회:학술대회논문집
• /
• 한국지구과학회 2010년도 춘계학술발표회 논문집
• /
• pp.53-53
• /
• 2010

지표위의 어떤 지점에서의 지구자기의 수평분력 방향과 진북방향 사이의 각을 편각(Declination)이라고 정의한다. 쉽게 말하면 편각은 나침반의 자침이 가러 키는 방향과 진북방향과의 사이 각을 말한다. 대부분의 사람들은 나침반의 자침이 북자기극(North magnetic pole)을 가러킨다고 잘못알고 있다. 지구 다이나모설(Geodynamo theory)에 의하면 주로 철(약 90%)로 구성된 외핵 속에서 계속 생성 유지되고 있는 복잡한 (각각 나선형(helical)의 회전축에 대체로 평행하거나 평행하지 않은) 대류(Convection currents)에 수반하는 전류가 복잡한 지구자기장을 형성한다. 지표상에서 측정한 지구자기장의 자료를 Spherical harmonic analysis 으로 분석하면 한 개의 커다란 쌍극자(Dipole) (Inclined geocentric dipole 또는 주된 자기장(Main field) 이라고 부름), 적도쌍극자(Equatorial dipole), 4극자 (Quadrupoles), 8극자(Octupoles) 등의 여러 개의 크고 작은 쌍극자들의 총합이 지구자기장의 근원인 것처럼 해석되고 있다. 어떤 지점에서의 지구자기장의 방향은 외핵에서 생성된 천체 자기장에서 Main field를 제거한 나머지 자기장과, 상부 맨틀(upper mantle), 지각 및 지표상에 존재하는 인공 물체 또는 암석 및 광석 등의 잔류자기 및 유도자기 그리고 지형 등의 영향으로 결정된다. 어떤 지점에서의 지구자기장의 방향은 태양풍(Solar wind)과 전리층 사이의 상호작용 등의 외부자장(external field)의 영향도 받는다. 비쌍극자 자장(Non-dipole field)은 지표상에서 측정되는 총자기장에서 외핵에서 생성된 주된 자기장(Main field) 즉, 지구의 회전축에서 약 11.5도 기울어진 쌍극자 자장을 제거하고 남는 자기장을 말한다. 따라서 편각은 비쌍극자자장의 영향을 가장 많이 받는다. 비쌍극자 자장은 정지한 상태의 자장(standing field) 과 매년 서쪽으로 약 0.2도 움직이는 Westward drift하는 자장으로 크게 두 가지로 구분된다. 쌍극자 자장의 방향은 매우 느리게 변하지만 그 세기는 현재 비교적으로 빠르게 약해지고 있다. 비교적으로 매우 빠르게 변하는 비쌍극자 자장의 변화를 영년변화(Secular variation) 이라고 한다.

• 조명전기설비학회논문지
• /
• 제24권8호
• /
• pp.48-54
• /
• 2010

교류 전기철도 시스템은 비선형 단상 부하인 차량의 부하특성으로 인해 고조파 왜곡, 무효전력 발생, 3상 불평형과 같은 전기품질 문제를 가지고 있다. 이 같은 전기품질 문제는 철도 시스템뿐만 아니라 철도와 연계된 다른 건전한 계통에도 악영향을 미치게 된다. 따라서 본 논문에서는 이와 같은 전기철도 급전시스템의 전기품질 문제를 보상하기 위해 철도용 전기품질 보상장치(RPQC; railway power quality conditioner)를 적용하고, SRF(synchronous-reference-frame) 제어를 이용한 RPQC의 제어방법을 제안한다. 제안하는 제어방법을 통해 RPQC는 고조파 왜곡, 무효전력, 부하 불평형과 같은 전기품질 문제를 순시적으로 보상할 수 있으며, 시뮬레이션을 통해 이를 검증한다. 시뮬레이션 결과는 제안한 RPQC 제어방법의 타당성을 보여주고 있다.

• Journal of Power Electronics
• /
• 제6권1호
• /
• pp.52-66
• /
• 2006

This paper proposes a wind energy conversion system connected to a grid using a self-excited induction generator (SEIG) based on the maximum power point tracking (MPPT) control scheme. The induction generator (IG) is controlled by the MPPT below the base speed and the maximum energy can be captured from the wind turbine. Therefore, the stator currents of the IG are optimally controlled using the indirect field orientation control (IFOC) according to the generator speed in order to maximize the generated power from the wind turbine. The SEIG feeds a (CRPWM) converter which regulates the DC-link voltage at a constant value where the speed of the IG is varied. Based on the IG d-q axes dynamic model in the synchronous reference frame at field orientation, high-performance synchronous current controllers with satisfactory performance are designed and analyzed. Utilizing these current controllers and IFOC, a fast dynamic response and low current harmonic distortion are attained. The regulated DC-link voltage feeds a grid connected CRPWM inverter. By using the virtual flux orientation control and the synchronous frame current regulators for the grid connected CRPWM inverter, a fast current response, low harmonic distortion and unity power factor are achieved. The complete system has been simulated with different wind velocities. The simulation results are presented to illustrate the effectiveness of the proposed MPPT control scheme for a wind energy system. In the simulation results, the d-q axes current controllers and DC-link voltage controller give prominent dynamic response in command tracking and load regulation characteristics.

• 전력전자학회논문지
• /
• 제15권3호
• /
• pp.235-243
• /
• 2010

본 논문에서는 총고조파 왜율(THD, Total Harmonic Distortion)과 리플 감쇄율(RAF, Ripple Attenuation Factor)을 이용한 계통연계 인버터용 LCL 필터 설계 방법을 제안한다. 인버터 측 인덕터 전류의 총고조파 왜율($THD_i$)과 필터 커패시터와 계통 측 인덕터 사이의 전류 리플 감쇄율(RAF), 그리고 계통에 주입되는 전류의 총고조파 왜율($THD_g$)의 관계를 분석하여 관계식을 도출하고, 이 관계식을 바탕으로 계통 주입 전류의 $THD_g$ 목표치를 만족하는 $THD_i$와 RAF를 선정하여 계통 측 인덕터($L_g$)와 인버터 측 인덕터($L_i$)의 인덕턴스 값을 계산한다. 한편 커패시터의 커패시턴스 값은 커패시터에 유입되는 무효전력을 고려하여 선정한다. 제안한 방법으로 LCL를 설계하여 시뮬레이션과 실험을 통해 계통에 주입되는 전류의 $THD_g$가 목표치를 만족하는 것을 보임으로써 설계 방법의 타당성을 입증한다.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.227-237
• /
• 2016

A novel digital current control strategy for digitally controlled DC-DC switching converters, referred to as Adjacent Cycle Sampling (ACS), is proposed in this paper. For the ACS current control strategy, the available time interval from sampling the current to updating the duty ratio, is approximately one switching cycle. In addition, it is independent of the duty ratio. As a result, the contradiction between the processing speed of the hardware and the transient response speed can be effectively relaxed by using the ACS current control strategy. For digitally controlled buck DC-DC switching converters with trailing-edge modulation, digital current control algorithms with the ACS control strategy are derived for three different control objectives. These objectives are the valley, average, and peak inductor currents. In addition, the sub-harmonic oscillations of the above current control algorithms are analyzed and eliminated by using the digital slope compensation (DSC) method. Experimental results based on a FPGA are given, which verify the theoretical analysis results very well. It can be concluded that the ACS control has a faster transient response speed than the time delay control, and that its requirements for hardware processing speed can be reduced when compared with the deadbeat control. Therefore, it promises to be one of the key technologies for high-frequency DC-DC switching converters.

• 한국안전학회지
• /
• 제38권5호
• /
• pp.1-7
• /
• 2023

This study analyzes the operational characteristics of 311 aged and non-aged residual current circuit breakers (RCCBs) in low-voltage consumer contexts. It investigates the influence of external temperature and harmonics based on the rated current multiples. To simulate temperature variations, a convectional oven was used around the circuit breakers. Additionally, the generation of harmonic reference signals and data measurement for overcurrent experiments were conducted using NI SCXI, myDAQ, and LabVIEW. An observation revealed that as the ambient temperature increased, the operating time of RCCBs decreased in the time delay region. This was attributed to the faster response or bending of the bimetal, which is the tripping element. However, aged RCCBs encountered challenges with tripping outside the protective curve. The operating time of the circuit breakers exhibited an acceleration influenced by the order and content of harmonic currents, potentially leading to malfunctions. Aged RCCBs demonstrated faster operating times than their non-aged counterparts. However, the difference in operating time varied based on the manufacturer's and operating environment of the RCCBs. Frequent malfunctions of RCCBs can result in power outages. In cases where these circuit breakers fail to operate, they can lead to secondary damages, including electrical fires and shocks. Consequently, it is imperative to consider the operating environment of RCCBs and provide appropriate replacement cycles to mitigate these risks.