• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.97-110
• /
• 1981

This study was conducted in order to investigate the status of harmful working environ ment on twelve rubber and ten chemical products manufacturing industries in Busan area over a period of five months from lune 1 to October 31, 1980. The summarized results were as follows: 1. The highest and lowest mean values of harmful environmental elements in workroom of rubber products manufacturing industries were noted in twisting (98.7dB) and coating department (77.3dB) to noise, molding ($6.43mg/m^3$) and forming ($1.33mg/m^3$) to dust, bonding (toluene 463.7ppm, xylene 457.8ppm and benzene 111.8ppm, respectively) and splicing (toluene 90.0ppm, xylene 83.3ppm and benzene 6.7ppm, respectively) to organic solvents, respectively. Also in chemical products manufacturing, they were noted in grinding (95.1dB) and shining department (76.8dB) to noise, packing ($4.30mg/m^3$) and staining ($3.20mg/m^3$) to dust, shining (393.3ppm and 375.0ppm, respectively) and varnishing(125.5ppm and 121.7ppm, respectively) to toluene and xylene, and scattering (51.8ppm) and mixing (23.9ppm) to benzene, respectively. 2. The mean values of harmful elements in workroom of rubber products manufacturing were 86.3dB to noise, $4.16mg/m^3$ to dust, 258.2ppm to toluene, 230.3ppm to xylene, and 5 4.0ppm to benzene, respectively. Also in chemical products manufacturing, they were 85.2dB to noise, $3.69mg/m^3$ to dust, 227.9ppm to toluene, 213.2ppm to xylene, and 36.3ppm to benzene, respectively. 3. Number of workers exposed to harmful working environment, over TLV, of a total 10,195 workers in rubber products manufacturing were 1,002(9.8%) to noise, 212 (2.1%) to dust, 1,581(15.5%) to toluene, 1,509(14,8%) to xylene, and 1,524(15.0%) to benzene, respectively. Number of workers exposed to harmful working environment, over TLV, of a 1,913 workers in chemical products manufacturing were 112(5.9%) to noise, 132(6.9%) to each organic solvent, respectively. 4. The values of noise and dust of rubber and chemical products manufacturing in 1980 were lower then those in 1977, but the value of organic solvent in 1980 was similar with that in 1977.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.04a
• /
• pp.35-36
• /
• 1999

• Korean Journal of Health Education and Promotion
• /
• v.18 no.2
• /
• pp.129-140
• /
• 2001

Harmful environment around school area have been increased with socio-economic development in Korea. Those entertainment facilities have caused a negative effect on the learning environment in many schools. As a result of increased entertainment harmful facilities in school area, the numbers of deviant behaviors such as drinking, smoking, substance abuse and sexual activity among junior high school students have been significantly increased. Given this situation, the aim of this study was to describe the distribution of the facilities; to access applied(experience) of the facilities according to students demographic variables; and to identify the relationship between use of the facilities and students risk health behaviors such as smoking, drinking, substance abuse and sexual activity. The field theory was used to study the relationship between the use of the facilities and risk health behaviors among students. A self-administered questionnaire survey was conducted in Korea. 2,114 junior and senior high school students(middle and high school students) were recruited by the method of proportional stratified random sampling from June to July 2000. Results indicated that: 1) The rates of using game centers, PC rooms, Song rooms and comic rooms were 78.3%, 75.6%, 71.6%, and 34.3% respectively. 2) High school students visited the entertainment facilities significantly more than middle school students(p〈0.001). 3) The rates of using facilities near schools were significantly associated with parents job(p〈0.05). 4) The rates of drinking, smoking, drug abuse, and sexual activity were 21.6%, 11.9%, 4.3% and 1.6% respectively. 5) Risk health behaviors such as smoking(p〈0.001) and drinking(p〈0.001), amount of smoking and drinking(p〈0.001) and sexual activity(p〈0.05) were associated with the experience of using the facilities. Those who had drinking experience were more likely to go the facilities than those without drinking experience. Also, those who were smoker had higher probability of going using the facilities than non-smokers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.420-425
• /
• 2010

In the process of warm forging, billet is heated up to $800^{\circ}C$ and located in the upper part of die block impression. The scattered oxidized scale may cause workers burn and shortening of die life sticking to the die block impression. The separating materials sprayed in die block cause harmful dust, harmful mist, fume, and bad odor which contaminate workshop environment. The process is classified as one of the avoided jobs and make the planned output achievement difficult. Development of an elimination device to clear out the contaminating materials in the workshop and improvement of the unsatisfactory maintenance method to fix the abrasion of die block impression which delays the dead line, cost increases needs to be developed. In this research, I tried to solve the problems caused in warm forging of bronze pipe joint such as the billet heating process, die maintenance, and manufacturing cost through improvement of warming forging manufacturing method and die maintenance method and eliminating harmful gas which will make the workshop more environment friendly.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.1
• /
• pp.71-78
• /
• 2009

Korea Marine Environment Management Corporation (KOEM) has waste oil facilities in 13 ports to collect and treat waste oil, bilge, etc. from ships based upon the Marine Environment Management Act of Korea and MARPOL 73/78 convention. Those facilities were designed and have been operated simply to discharge water under the level 15 ppm of oil contents. However, bad smells occurred from rotten organic matters in waste water and direct discharge of harmful substances to receiving water caused civil appeals. Therefore, KOEM tried to develop new process for treatment of oily waste water from ships, which could mitigate harmful substances, save cost, calm down civil appeals and contribute to marine environment preservation. This process consists of 3 steps to remove oil contents via gravity variation at first, $O_3$ input to contact water and organism deposition by inputting condensate deposits. Then finally upper water will be discharged, and the deposited substances in the bottom will be compressed through spinning machine to transfer to the designated contractors for treatment of wastes. This is very effective and innovative in that it could reduce 3 or 4 steps compared with existing process and mitigate not only waste oil concentration but also hard resolving materials such as colloid, ABS, phosphorus, nitrogen and bad smells. This method is expected to minimize bad smells and harmful gases, to save more than 10% of maintenance cost, and to arrange the good base for garbage treatment business dealing with waste water and bad smell.

• Journal of Conservation Science
• /
• v.30 no.2
• /
• pp.235-241
• /
• 2014

In this study, we are trying to verify humidity control capability of the exhibition environment of cultural property by measuring adsorption and desorption performance, the control ability of harmful substances by the adsorption experiments of harmful gases. In the experiment of adsorption and desorption performance, in the low humidity area, Artsorb desorbed overwhelmingly more than activated carbon whereas activated carbon absorbed more. Adsorption speed was faster slightly in Artsorb absorption speed was similar in both. In the middle humidity area, absorption by artsorb was slightly more and desorption was similar in both so characteristic of Artsorb didn't appear. Also, Adsorption speed was faster in activated carbon but in the process of desorption, the speed of Artsorb was faster. In adsorption experiment of harmful substances, the concentration in the environment with activated carbon was lower than one with Artsorb, but the difference appeared small. And as a result of observation of the difference in concentration due to adsorption of harmful gas by the change in the metal specimen, the most change was shown in lead specimen and the color difference between the lead specimens of the activated carbon and Artsorb appeared greatly.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.53-63
• /
• 2012

The purpose of this study is to grasp foreign worker's industrial safety and health state, which find out the improvement to secure the basic safety net for foreign workers. We have investigated 2,050 workers through direct interviews during the period from April 12, 2010 to May 31, 2010. And the result of analysis, foreign worker's daily average working time is 10.6 hours(40.8% workers in total work 10~12 hours), the extent of exposure to harmful and dangerous working environment is 'the position which cause pain in neck, waist, hands, shoulders, legs'(69.3%), 'repetitive hands and arms movement'(66.1%). It showed 'experience of accident damage or disease related work'(27.3%), 'never apply for industrial accident compensation' is revealed high at 73%. As a result of completing a safety health education for a year, it showed 'never educated'(40.2%), 'the institute that foreign workers have used for help and advice is the foreign worker's support center'(61.9%) Thus, hiring foreign workers in the company are small in site, the environment is too harmful and dangerous. In addition, no safety and health managers, legally blind spot located in the health and safety, because it is an urgent meet for these measures to improve.

• Journal of Korean Library and Information Science Society
• /
• v.50 no.4
• /
• pp.635-658
• /
• 2019

In this study, the harmful factors measured in S university's central library were divided into ① air harmful substance ② biological harmful factors ③ carbon monoxide, carbon dioxide, and nitrogen dioxide concentration, measured and analyzed compared to the relevant criteria. The analysis showed that the harmful substances in the air - fine dust, asbestos, volatile organic compounds and formaldehyde - were all lower than the relevant standards, and that biological harmful factors such as fungi in the air, gramophageal bacteria, and endotoxin were also found to have no particular problems. The concentration of carbon monoxide, carbon dioxide, and nitrogen dioxide in the air was also maintained without any unusual factors compared to the concentration in the ordinary atmosphere. However, the library is a multi-use facility that needs regular cleaning and ventilation to manage the environment.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.90-98
• /
• 2014

Lately accidents of harmful chemical substance in korea were repeatedly replaying. We studied problems and preparation plan in 2008 years~2014 years through analysis cases of harmful chemical substance. Leakage of chemical substance's accident situation shows that leakage in the workplace is the most 10 cases, accounting for 58.6% is the largest proportion in 2009. Leakage according to explosion accounting for 50% (5 cases) in 2004, 25% (4 cases) in 2007 and 33.3% (4 cases) in 2011 has very irregular change. Therefore, A major cause of accidents is lack of safety management. Harmful chemical substance showed various aspects, high residual substance and non-visible characteristic so response and recovery was easy. And the second damage to move a distance causes environment pollution. So a mutual-assistance system and integrated system of related organization have to build and expert of chemical incident response and therapist of chemical substance response have to establish to do efficient and rapid response.

• Korean Journal of Ecology and Environment
• /
• v.50 no.3
• /
• pp.337-354
• /
• 2017

Cyanobacteria Aphanizomenon population is widely distributed in the world, and well known as harmful algae by producing toxins and off-flavor materials, thus belonging to one of the taxa that became more interested in the field of limnoecology. In this study, the frequency, intensity, and duration of Aphanizomenon occurrence were increased with the abnormal drawdown of water level in the winter in Boryeong Reservoir, and the spatial and temporal characteristics of them are compared with each other in the perspective of hydrometeorology (1998 to 2017) and limnology (2010 to 2017). In Korea, Aphanizomenon flourished mainly in high temperature, and the appearance in the low temperature was rare in total five times. The harmful cyanobacteria Aphanizomenon was observed in the low temperature (December to February) in Boryeong Reservoir from 2014, and then reached a maximum value of $2,160cells\;mL^{-1}$ in January 2017. In addition, the period exceeding $1,000cells\;mL^{-1}$ at this time was more than 3 months. This was simultaneously associated with abnormal water level fluctuation in the low temperature ($<10^{\circ}C$). The large drawdown of water level in the winter season has the potential to promote or amplify the germination and development of harmful algae. Also, subsequent water quality and ecological impacts(e.g., algal toxins and off-flavor substances) need to be considered carefully.