• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.128-135
• /
• 2003

To decrease environmental damage, the development of environmental friendly fluids provides attractive alternative to the conventional fluids. In this study, the effects of harmful ingredients (Cl, S) contained in the fluids that used in grinding and cutting processes to influence on the nasal cavities of the white rats were measured indirectly. Also, the level of the environmental influence in workshops was graded through analyzing the concentration and chemical ingredients of flying-dust, which generated from the friction and combustion in the cutting process, that for analyzing how harmful the influence of particles to workers then it could be used as the basic data for improving the environment. To improve the conventional machining fluid, which can be harmful on worker's bodies and the environment, the environmental friendly machining method was suggested through analyzing each lubrication properties of vegetable fluid and used-edible oil as alternative fluid. As a result, it was known that an emulsion type fluid might be the main cause leading to some respiratory ailments. Also this paper presents the possibility to use vegetable fluid and used-edible oil as the alternative of cutting fluids.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.174-184
• /
• 2020

Objectives: The purpose of this study was to improve the working environment by identifying the work satisfaction of the cleaning workers of the aircraft and measuring and assessing the harmful factors of the cleaning process. Methods: We asked 23 cleaning companies for questionnaires and got 100 answers from 5 companies. The A-E Airline health manager has been contacted to establish a site survey schedule. The in-flight and lounge were measured using direct reading equipment. The harmful factor to be measured are noise, dust, temperature, volatile organic compound, total airborne bacteria, and total airborne bacteria. Results: Uncomfortable positions when replacing blanket, cleaning the table, and cleaning the floor have been identified as factor that reduce work satisfaction. Noise when replacing newspapers and cleaning toilets has been identified as a factor that lowers work satisfaction. Temperature and humidity were found to reduce work satisfaction during in-flight disinfection. Measurements of aircraft cabin and lounge with direct read equipment have shown that none of the items exceed the exposure criteria. Conclusions: As a result of measuring direct-reading equipment, no items exceeded the exposure criteria for each harmful factor. A clear survey of the working environment is required based on the results, and additional research is needed using personal sample measurement.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.4
• /
• pp.101-116
• /
• 2022

The purpose of this study is to understand the trends of fashion mask designs as a fashion item with characteristics to protect individual health and safety from harmful environments. To this end, the concept, the trend analysis of the domestic and foreign mask markets, the type, characteristics of functional masks, and the design trend of fashion masks were analyzed. Research methods included case studies and literaturte on mask design, fashion magazines, fashion brand websites, fashion collections, and promotional material. First, masks for personal safety were classified as protective function masks from the natural environment, functional masks by industrial groups, masks for protective functions from biohazards, and masks for protective functions from various external activities. Through this analysis, the design trends of fashion masks were analyzed. The functional orientation of structure and functionality, the environmental orientation of sustainable eco-friendly methods, the fashion orientation of individual fashion styling, and the social functional orientation tend to transmit social messages. In the harmful environment of everyday life, items such as fashion masks with functionality and fashion characteristics should be continuously studied to integrate functional and design characteristics that can contribute to the future fashion industry and the fashion market as a sense of unity and responsibility.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.1
• /
• pp.36-40
• /
• 2010

Ballast water has been known as a major vector for global dispersal of toxic dinoflagellates and other microalgae. In this study, biodiversity in ships’ ballast water was examined using a dinoflagellate-oriented PCR primer set and species-specific real-time PCR. While motile dinoflagellates could be observe at very low cell densities by light microscopy,a wide range of dinoflagellate taxa including parasitic and phototrophic pico-dinoflagellates as well as harmful species to marine fish/shellfish was detected when techniques for cloning/sequencing of SSU rDNA of sample cells were used. Present result suggests that molecular methods including species-specific PCR primers may offer rapid and accurate detection of invasive species in ballast water.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2031-2033
• /
• 2004

In this paper, electromagnetic wave environment generated from electronic equipments was investigated. Since the main source of electromagnetic waves are electronic equipments, the field intensity of a harmful electromagnetic wave was measured and its harmful level was analyzed. It was also found that the result was 23%${\sim}$38% in case of TV set and microwave oven. Based on this analysis, this study proposed efficient shielding method to suppress unwanted electromagnetic wave.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.177-183
• /
• 2010

Bum-type $CO_2$ generators are widely used in greenhouses for the purpose of $CO_2$ supply for photosynthesis and greenhouse heating. However harmful gases included in the air might give severe effects on the plant growth. For investigating the possible emission of harmful gases from commercial bum-type $CO_2$ generators, we carried out the analysis of the harmful by-products (NO, NOx, $NO_2$, CO, and VOCs) and $CO_2$ caused by using a bum-type $CO_2$ generator in greenhouses. And the harmful by-products from different type of fuels such as kerosene, LPG, and LNG were quantified. In order to minimize the uncertainties from a $CO_2$ generator, 4 different $CO_2$ generators were utilized in four plastic greenhouses and a glasshouse located at different places during the experimental works. The results showed that the concentration of NOx is proportional to $CO_2$ concentration. Levels of harmful gases in the most of greenhouses, where the new bum-type $CO_2$ generators were installed, were lower than 1.0 ppm when $CO_2$ concentration was set at 1,000 ppm. In case of LNG combustion, the concentration of CO reached out up to 300 ppm and pre-treatment for CO reduction, such as the adsorption process, would be inevitable to abate the adverse effects on plant growth.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.804-812
• /
• 2011

To prevent the overflow of various harmful chemicals, it is necessary to modify the chemical management system with an expansion to institutionally regulated substances. This modification should be preceded by selection of the priority chemicals, with a diverse chemical ranking system (CRS) applied to select the chemicals in developed countries. In Korea, a systematic CRS was used in a project related to soil and groundwater, however, it is inadequate to compare soil and groundwater CRS to that of surfacewater. In this study, a priority chemical ranking system for surfacewater was proposed through the analysis of international and domestic CRS cases. This was then applied to 161 chemicals to derive the priority list of harmful chemicals. As a result, Chemical RAnking of surFacewater polluTants (CRAFT) is presented for the protection of human health and the aquatic ecosystem from surfacewater pollutants. The components of CRAFT are the human health toxicity, aquatic ecosystem toxicity and reliability assessment factors. Three lists were derived from the 161 priority harmful chemicals for the protection of human health, aquatic ecosystem or both. It is expected that this result can be useful to prioritize harmful chemicals for the protection of human health and the aquatic ecosystem from Korean surfacewater.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.439-441
• /
• 2007

The seoul metropolitan subway has installed 8 lines and about 500 stations to transport 5 million passengers everyday. The underground air pollution level in the subway stations is very severe status, which is very harmful to the commutators and its personals. Although subway roles as such a massive and huge transportation system, the subway doesn't adapt yet any real-time air monitoring system. They have only some hand-held type detector equipments for monitoring air pollution. Therefore subway passengers are exposed to the harmful air pollution environment. The most harmful environmental parameters among the air pollution are known as the dust and sound noise dB level in the subway station. Because the dust is consisted of very small particles, we can't see them easily in dark condition on the platform, but it is very harmful. The monitoring system for air pollution is developed using embedded system attached with 6 different environmental sensors. This system monitors air pollution of dust sound noise, gas, temperature, humidity, inflammable gas, toxic gas in the subway ?station. The sensor unit of the ARM-CPU board and sensor transmits real time environmental data to the main server using Zigbee wireless communication module and TCP/IP network. The main control server receives and displays the real-time environmental data, and it send alarms to the personals when high level value.

• Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.159-167
• /
• 1998

The environmental characteristics in shellfish farms were investigated in the western part of Jinhae Bay, 1996. During summer, anoxia and high nutrient concentrations were found in the bottom waters of shellfish farms. The concentrations of particulate organic species in seawaters were enriched, showing an average 57.44 uM for POC, an average 5.45 uM for PON, and an average 0.42uM for PP. The sediments environment in the farms was very polluted. The concentrations of COD and AVS were more than 20 mg/g.dry and 0.5 mg/g.dry, respectively. The total sedimentation rate was high as an average $7.81g/m^2/day$ with organic matter contents of $26\%$. Oxygen consumption rate was similar to polluted area as an average of $439mg/m^2/day$. Nutrient release rates were an average of $8.25mg/m^2/day$ for nitrogen and an average of $1.38mg/m^2/day$ for phosphorous. The cluster analysis through environmental data in summer indicated that DO, nutrient in the bottom water, and AVS in the sediment were important factors to characterize the polluted environmental site.

• Korean Journal of Child Studies
• /
• v.27 no.2
• /
• pp.153-165
• /
• 2006

This study examined moderating effects of mother's support and community environment on relationships between after school self-care and problem behaviors. Subjects were 579 3rd and 6th grade elementary school children. Major findings were positive relationships between after school self-care and problem behaviors. Neither gender differences nor grade differences were found in the relationships between after school self-care and problem behaviors. Moderating effects of care by relatives or neighbors on mother's support was shown in the relationships between after school self-care and internal problem behaviors. Moderating effects of proximity to harmful facilities were found in relationships between after school self-care and external problem behaviors.