• Journal of the Korea Furniture Society
• /
• v.17 no.1
• /
• pp.11-22
• /
• 2006

This study attempted to visually inspect eight hundred wood crafts collected from various countries. These include sculputures, toys, jewl cases, kitchen wares, candle holder and wooden vases, stationery, sport outfits and etc. The most impressive wood is Myrtlewood, a broadleaf evergreen which grows along the coastline of southern Oregon and northern Califonia. Myrtlewood possesses a wide variety of grove patterns. This unique wood varies in color from a deep, rich brown to silver grey, red and every yellow. Myrtlewood is being recognized as being one of the most beautiful hardwoods in the world.

• Journal of the Korean Wood Science and Technology
• /
• v.3 no.1
• /
• pp.48-49
• /
• 1975

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.1
• /
• pp.55-60
• /
• 1986

Discoloration sensitivities of woods grown in this country haven't reported yet. Therefore we examined discoloration sensitivities of domestic wood specimens to iron (0.1 %, $FeCl_3.6H_2O$), alkali (pH 12.0, NaOH). acid (pH 1.0, $C_2H_2O_4$) and exposing to sunlight (40 hrs), Thirty-six hardwood species were collected and examined. All specimens were prepared from heartwoods of the collected species. But the specimens of 4 Betula species were divided into sapwoods and heartwoods. By iron stain, the color differences (${\Delta}E$) of 21 wood specimens including one Betula sapwood showed above 12.0, which means strong discoloration sensitivities, and of 3 specimens including one Betula sapwood showed below 2.5, which means weak discolorations. The most strong iron discoloration species was Jungkukgulpi-namu (Pterocarya stenoptera). By alkali stain, the color differences (${\Delta}E$) of 3 wood specimens showed above 9.0, which means strong discoloration sensitivities, and of 18 wood specimens including 4 Berula sapwoods showed below 2.5, which means weak discolorations. By acid stain, the color differences (${\Delta}E$) of 6 wood specimens showed above 10.0 which means strong discoloration sensitivities, and of 12 wood specimens including one Betula sapwoods showed below 2.5, which means weak discolorations. By exposing to sunlight, the color differences (${\Delta}E$) of 31 wood specimens including one Betula sapwoods showed below 6.5, which means, strong discoloration sensitivities, and of only one specimens showed below 2.5, which means weak discoloration. The most strong discoloration species by exposing to sunlight was Guirung-namu (Prunus padus). In general, it was shown that hardwoods grown in Korea were most subject to change of color by exposing to sunlight and next were by iron stain. Domestic hardwoods showed some differences in discoloration sensitivities from domestic softwoods previously reported.

• Journal of Korean Society of Forest Science
• /
• v.96 no.2
• /
• pp.214-221
• /
• 2007

The effect of nutrient availability and forest type on the nutrient turnover of fine roots is important in terrestrial nutrient cycling, but it is poorly understood. I measured nutrient turnover of hardwoods and softwoods at three well studied sites in the northeastern US: Sleepers River, VT; Hubbard Brook, NH; Cone Pond, NH. Significant differences in nutrient turnover by fine roots were observed among sites, but not between forest types. The magnitude of differences for each element ranged from 3 times for P and N to 8 times for Ca and Mg between sites. Smaller differences of 0.2 to 0.8 times were observed between forest types. In hardwoods, the Sleepers River 'new' site had $23kg\;ha^{-1}\;yr^{-1}$ Ca, $7kg\;ha^{-1}\;yr^{-1}$ Mg, and $16kg\;ha^{-1}\;yr^{-1}$ K turnover, owing to high root nutrient contents and turnover. Cone Pond had the highest turnover for Mn ($0.8kg\;ha^{-1}\;yr^{-1}$) and Al ($16kg\;ha^{-1}\;yr^{-1}$), owing to high nutrient contents. The Hubbard Brook hardwood site exhibited the lowest turnover of these elements. In softwoods, the variation in turnover of Ca, Mg, and K was lower than in hardwoods. The Hubbard Brook had the highest turnover for P ($1.6kg\;ha^{-1}\;yr^{-1}$), N ($31kg\;ha^{-1}\;yr^{-1}$), Mn ($0.4kg\;ha^{-1}\;yr^{-1}$), Al ($10kg\;ha^{-1}\;yr^{-1}$), Fe ($6.4kg\;ha^{-1}\;yr^{-1}$), Zn ($0.3kg\;ha^{-1}\;yr^{-1}$), Cu ($34g\;ha^{-1}\;yr^{-1}$), and C ($1.1Mg\;ha^{-1}\;yr^{-1}$). Root Ca turnover exponentially increased as soil percentage Ca saturation increased because of greater root nutrient contents and more rapid turnover at the higher Ca sites. These results imply that nutrient inputs by root turnover significantly increase as soil Ca availability improves in temperate forest ecosystems.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.231-237
• /
• 2006

Grease barrier food containers are commonly used for packaging of fast food, cooked food, and food in general. Greaseproofing is also used for certificate paper and label paper etc. Different pulp raw materials, due to their different fiber morphology and chemical compositions, produce papers of varying characteristics. We used optical photomicroscopy and fiber analysis data to evaluate fiber morphology and traits under various beating conditions in order to understand which pulp raw materials produced superior greaseproofing property when a fluorinated greaseproofing agent was added internally. The experiment studied 9 species of pulps, including 2 softwood (northern pine and radiata pine) bleached kraft pulps which were beaten to 550 and 350 mL CSF, respectively; 3 hardwoods (eucalypts, acacia, mixed Indonesian hardwoods) bleached kraft pulps which were beaten to 450 and 250 mL CSF, respectively; and nonwood fibers of reed, bagasse, and abaca. A fluorinated greaseproofing chemical at 0.12% dosage with respect to dry pulp was added to each pulp preparation and formed handsheets. A total of 67 sets of handsheets were prepared, and their basis weights, thickness, bulks, opacities, wet opacities, air resistance, water absorption and degrees of greaseproofing were measured for an overall evaluation of pulp and freeness on greaseproofing papers. The experimental fiber length, coarseness and distribution characteristics and the greaseproofing results suggest that softwood pulps (radiate pine > northern pine) were superior to hardwood pulps (eucalypts > acacia > mixed Indonesian hardwoods). The unbeaten pulps gave papers with high porosities and nearly devoid of greaseproofing property. Greaseproofing is proportional to air resistance. Among the nonwood fibers, bagasse had the best greaseproofing property, followed by reed and abaca was the poorest. With regards to waterproofing property, hardwood pulps (mixed Indonesian hardwoods > acacia > eucalypts) were better than softwood pulps (northern pine > radiate pine). Among the Nonwood fibers, reed had the highest waterproofing property, and it was followed by abaca, while bagasse had the poorest waterproofing characteristic. In summary, bleached kraft northern pine, eucalypts and reed pulps were best suited for making greaseproofing papers, Freeness of the pulps should be kept at $200{\sim}280mL$ CSF for optimal performance.

• Journal of Forest and Environmental Science
• /
• v.9 no.1
• /
• pp.10-18
• /
• 1993

The study was carried out to investigate the physical (Density, Percentage of latewood, Percentage of pore zone, Mean annual ring width) and mechanical (Compressive strength parallel to the grain, Compression perpendicular to the grain, Shearing strength) properties of some major northern softwoods and hardwoods. The physical and mechanical properties of each species are summerized as Table 2 and the relationship between physical and mechanical factors are discussed. The results of this study were as follows: Density and percentage of latewood are closely related to physical and mechanical properties, but percentage of pore zone and mean annual ring width are remotely related to physical and mechanical properties.

• Journal of Forest and Environmental Science
• /
• v.30 no.2
• /
• pp.226-232
• /
• 2014

To understand transition characteristics from wood to charcoal the dimensional changes of carbonized woods at low temperature from $300^{\circ}C$ to $350^{\circ}C$ at the intervals of $10^{\circ}C$ were investigated. Three species of hardwoods and two species of softwoods were used in this study. Measurements of dimensional changes of cells were observed by stereoscopic microscope and an image analyzer. The apparent volume of each specimen decreased greatly with increasing temperature. Severe cracks and collapse were observed frequently in hardwoods and hardly in softwoods. Vessel diameter and tracheid cell wall thickness of the wood samples were decreased with increasing carbonization temperature. Contraction of vessel diameter in tangential direction was greater than that in radial direction. Cell wall thickness of tracheids decreased with increasing carbonization temperature. Consequently, even though it was small range of carbonization temperature, dimensions of wood components were changed considerably.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.5
• /
• pp.391-398
• /
• 2010

In this study, the figure of domestic hardwood was observed using the naked eye and the possibility of substituting imported wood with domestic one in the making woodcraft or furniture was investigated. It was known from the investigation on 8 different hardwoods that there were various figures such as cloud-shaped figure, blister figure, crotch figure, bird's eye figure, etc. in Zelkova serrata wood and the beautiful pigment figure in Diospyros Kaki wood. There were the unusual figures such as wavy grain figure, fiddle back figure, etc. in Cedrela sinensis wood and was clear ray-fleck figure in Quercus variabilis wood. There were also various figures such as wavy grain figure, blister figure, pigment figure, etc. in Sophra japonica, Tilia amurensis, Castanea crenata, Kalopanax septemlobus wood, etc. It is thus that distinguished figures appeared in each kind of wood can be used for craft, sculpture, furniture, and interior material. These kinds of figures can also be used for instrument, toy, stationery, life article material and souvenir, etc. And it can be expected that they will replace the imported wood has been mainly used to make the woodcraft or furniture until now.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.73-82
• /
• 2007

A large underground wooden structure of Shilla period which was presumably built in the 5th century A.D. was excavated at Gomo Sanseong Fortress, Mungyeong, Gyeongsangbuk-do. Of 12 wood member samples obtained on the site, 8 hardwoods under family Fagaceae and 4 softwoods under family Pinaceae were separated through light microscopy. Among hardwoods, 5 were found to be Cerris section, 2 Prinus section, and 1 Castanea crenata. On the other hand, 4 softwoods were all identified as Finns densiflora.

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.131-142
• /
• 2024

The purpose of this study was to estimate the optimal stand density criteria for each growth stage of Chamaecyparis obtusa (Siebold & Zucc.) Endl. to achieve the timber production goal for cypress forests and develop an optimal silvicultural system for forest thinning. A relative yield index (Ry) value of 0.75, presented as a stand density management criterion index, was estimated by analyzing the relationship characteristics between the composition ratio and stand density of slender trees from 216 sample plots of the recruited cypress forests. The analysis of the feasibility of achieving each production target in the existing silvicultural system for C. obtusa revealed that the growth rate according to the parameters of forest land productivity, such as site index and thinning intensity according to the increase in age, was not properly reflected. In the thinning system for each timber production target analyzed in this study, 353 high-quality large hardwoods from 498.1 m³/ha, 703 high-quality medium hardwoods from 376.2 m³/ha, and 1,758 small-diameter hardwoods from 249.5 m³/ha could be harvested. Although the silvicultural system prepared on the basis of the results of this study cannot be uniformly applied according to various management goals, this study is meaningful in that it presents empirical reference standards based on the stand density management diagram that reflects the growth characteristics of cypress forests in South Korea.