• Journal of the Korean Society of Systems Engineering
• /
• v.2 no.1
• /
• pp.18-23
• /
• 2006

The purpose of this study and report is to provide, to the MND, an independent cost analysis of modernizing software of F-16 fighter fleets to support the use of several weapon system options, including JDAM, AIM-9X and HARM Targeting System etc. The study analyzed each options with software sizing, software cost, enabling hardware cost, flight test cost, system engineering cost, and 3 strategies. And the study proposed and analyzed some alternative strategies: strategy1 is to modernize software only within existing electronic processing capability; strategy2 is a full upgrade of weapons avionics with plug compatible electronics; strategy3 is an approach defined to mirror the USAF Common Configuration Implementation Approach (CCIP). The recommended alternative is strategy2.

• Proceedings of the Korean Reliability Society Conference
• /
• 2005.06a
• /
• pp.251-257
• /
• 2005

Software system which is essential in operating the computer has gradually become an indispensable element in many aspects of our daily lives and an important factor in numerous systems. In recent years, software cost sometimes exceeds the cost of maintaining the hardware system. In addition to the cost necessary to develop the new software system and to maintain the system, the penalty costs incurred due to software failures are even more significant. In this paper, a cost model incorporating the warranty cost, debugging costto remove each fault detected in the software system, and delivery delay cost is developed. A software reliability model based on non-homogeneous Poisson process(NHPP) is established and the optimal software release policies to minimize the expected total software cost are discussed. Numerical examples are provided to illustrate the results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12C
• /
• pp.1182-1191
• /
• 2003

In this paper, we propose a new hardware architecture for integer transform, quantizer, inverse quantizer, and inverse integer transform of a new video coding standard H.264/JVT. We describe the algorithm and derive hardware architecture emphasizing the importance of area for low cost and low power consumption. The proposed architecture has been verified by PCI-interfaced emulation board using APEX-II Alters FPGA and also by ASIC synthesis using Samsung 0.18 um CMOS cell library. The ASIC synthesis result shows that the proposed hardware can operate at 100 MHz, processing more than 1,300 QCIF video frames per second. The hardware is going to be used as a core module when implementing a complete H.264 video encoder/decoder ASIC for real-time multimedia application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1368-1376
• /
• 2000

This paper describes the codesign method for IS-95 based CDMA(Code Division Multiple Access). By codesign we mean to design hardware and software simultaneously. Codesign lead to reduction in design time, cost and power consumption. When we partition a system into hardware and software, some modules with longer processing time and larger power consumption are implemented using hardware and the remaining part is implemented using software. In proposed design, we design the synchronous accumulator of CDMA searcher in hardware and the other part in software, The hardware part is designed using VHDL, while software part is designed using GC(Generic C). We simulated and verified the system using COSSAP in SYNOPSYSTM. Experimentation showed the maximum 48.5% speed reduction compared with the design using software only.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.10
• /
• pp.3247-3261
• /
• 2000

In recent years, as the complexity of signal processmg systems Increases, the needs for dcslgners to mlx up hardware-part and software-part grow more and more considering both performance and cost There exist many algorilhms In C for vanous Signal processung apphcations. We have to translate the algonlhm C to hardware descnptlon language(HDL), If portion or the algonlhm needs to be unplcmenled in hardwarc pari of the syslcm. For this translation. it's dtfftcult to handle dynamic memory allocalion, function calls, pointer manipoJalion. This research shows a design method for a hardware model about recursive calls which was classified into software part of the system previously [or the translation from C to VHDL. The benefits of havlIlg recursive calls m hardware structure can be quite high since provides flexbility in hardware/software partitioming in codesign sysem.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.5
• /
• pp.253-259
• /
• 2018

Recently, small satellite industries are rapidly changing. Demand for high performance small satellites is increasing with the expansion of Earth Observation Satellite market. A next-generation small satellites require a higher resolution image storage capacity than before. However, there is a problem that the HW configuration of the existing small satellite image storage device could not meet these requirements. The conventional data storing system uses SDRAM to store image data taken from satellites. When SDRAM is used in small satellite platform of a next generation, there is a problem that the cost of physical space is eight times higher and satellite price is two times higher than NAND Flash. Using the same satellite hardware configuration for next-generation satellites will increase the satellite volume to meet hardware requirements. Additional cost is required for structural design, environmental testing, and satellite launch due to increasing volume. Therefore, in order to construct a low-cost, high-efficiency system. This paper shows a next-generation solid state recorder unit (SSRU) using MRAM and NAND Flash instead of SDRAM. As a result of this research, next generation small satellite retain a storage size and weight and improves the data storage space by 15 times and the storage speed by 4.5 times compare to conventional design. Also reduced energy consumption by 96% compared to SDRAM based storage devices.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.367-370
• /
• 2002

In this paper, we propose a new node architecture LonWorh control Network for home network system environmint using power line communications. Using conventional Lon Work technology is a many disputable points for home network. LonWork network system needs high-cost development equipment. Moreover, conventional Lon Work system can not implement high-grade algorithms and variety application operation. because of the limitation of processing ability in Neuron chip. For that reason, the proposed structure is applicable to low-cost and more complex applications which are impossible in home network using conventional Lonworks structure. The proposed structure is implemented with some hardware and かone software for power line home network. The physical layer and the MAC layer of the LonTalk protocol within ton Work are implemented in hardware, which decreases the development costs communication processor. The upper of link layer of the LonTalk protocol is implemented with software, which decreases the development costs of software and increases the flexibility of tile system and increases the extension of the system. We verified the commercial feasibility of the proposed system through the power line tests with the existing LonWorks network in home network. As a result, it is concluded that the proposed architecture provides increasing flexibility and decreasing cost of the system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.401-408
• /
• 2017

This paper describes development and validation processes of a low-cost hardware based flight control computer designed for multi-rotor UAVs. The developed flight control computer controls multi-rotors stable and can handle complex flight missions using an integrated high-performance Linux computer. A complementary filter generates a navigation solution with 500 Hz, and a proposed observer significantly reduces measurement noise. A control algorithm utilizes a feed-forward term computed by a three-dimensional curve fitting method, and it increases tracking performance. The developed flight control system has been fully tested through several test flights, and it can apply to real flight environments.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.6
• /
• pp.22-34
• /
• 2010

Existing image scalers generally adopt simple interpolation methods such as bilinear method to take cost-benefit, or highly complex architectures to achieve high quality resulting images. However, demands for a low power, low cost, and high performance image scaler become more important because of emerging high quality mobile contents. In this paper we propose the novel low power hardware architecture for a high quality raster scan image scaler. The proposed scaler architecture enhances the existing cubic interpolation look-up table architecture by reducing and optimizing memory access and hardware components. The input data buffer of existing image scaler is replaced with line memories to reduce the number of memory access that is critical to power consumption. The cubic interpolation formula used in existing look-up table architecture is also rearranged to reduce the number of the multipliers and look-up table size. Finally we analyze the optimized parameter sets of look-up table, which is a trade-off between quality of result image and hardware size.

• Speech Sciences
• /
• v.11 no.3
• /
• pp.143-156
• /
• 2004

In this paper, we implemented a vocabulary-independent speech recognizer using the TMS320VC33 DSP. For this implementation, we had developed very small-sized recognition engine based on diphone sub-word unit, which is especially suited for embedded applications where the system resources are severely limited. The recognition accuracy of the developed recognizer with 1 mixture per state and 4 states per diphone is 94.5% when tested on frequently-used 2000 words set. The design of the hardware was focused on minimal use of parts, which results in reduced material cost. The finally developed hardware only includes a DSP, 512 Kword flash ROM and a voice codec. In porting the recognition engine to the DSP, we introduced several methods of using data and program memory efficiently and developed the versatile software protocol for host interface. Finally, we also made an evaluation board for testing the developed hardware recognition module.