• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.32-37
• /
• 2004

Effects of mushroom powder on physicochemical characteristics of dough and bread-making properties were studied. In mixogram test, addition of 2-10% mushroom powder increased water absorption from 67,0 to 79%. Peak time, peak height, band width, and seven minute height of mushroom-wheat flour composite were similar to those of control. Sedimentation and P.K. values decreased with increasing amount of mushroom powder In amylogram test, no significant difference was observed in gelatinization temperature between control and mushroom powder-added dough. Peak viscosity increased with increasing amount of mushroom powder, Highest loaf volume was attained when 2 and 4% mushroom powders were added, whereas decreased above 6%. Bread weight and L value of crust increased with increasing amount of mushroom powder whereas 'a' value decreased. As the amount of mushroom powder increased, L value of crumb color decreased. No significant difference in springiness and adhesiveness was observed between control and mushroom-wheat composite flour bread whereas chewiness and gumminess, increased with increasing amount of mushroom powder, Hardness generally increased as the amount of mushroom powder increased. Mushroom powder caused bread staling at both storage temperatures ($4^{\circ}C\;and\;25^{\circ}C$). Although sensory value decreased with increasing mushroom powder, use of mushroom powder to replace up to 4% wheat flour is recommended in making bread.

• Clinical and Experimental Pediatrics
• /
• v.51 no.4
• /
• pp.391-395
• /
• 2008

Purpose : This study was performed evaluate optimal dose for disimpaction, efficacy and safety of PEG 4000 in children with chronic functional constipation. Methods : Eighty six children with chronic functional constipation were enrolled in this prospective study at Konkuk university hospital March, 2003 through August, 2006. Success in disimpaction with PEG 4000 was defined as meeting at least two out of three criteria; resolution of chief complaint, getting easiness of defecation with respect to frequency of bowel movement and hardness of stool based on defecation diary, and decrease in fecal impaction on simple abdominal X-ray test. Adverse effects of PEG 4000 were monitored clinically and biochemically. Results : Eighty three out of 86 children completed the study, and success rate of disimpaction was 99% (82/83). The mean dose of PEG 4000 for disimpaction was $0.93{\pm}0.28g/kg/day$ (0.4-2.0 g/kg/day, Max.: 30 g/day). Frequency of bowel movement increased ($5.02{\pm}2.71/wk$ vs. $11.25{\pm}5.43/wk$) in most children (79/83). Fecal impaction on simple abdominal X-ray test improved with statistical significance in 25 children (P=0.0007). Because of adverse effect of PEG 4000, 3 children did not complete the study; urticaria, severe diarrhea, diarrhea and abdominal pain. One 6-year-old girl who completed the study complained tingling sensation in the hand and foot without laboratory abnormality (4/86, 4.7%). Laboratory test revealed hyperosmolality without clinical symptom in 1 child, and eosinophilia in 6 children. Conclusion : The average safe and effective dose of PEG 4000 for disimpaction was $0.93{\pm}0.28g/kg/day$ (0.4-2.0 g/kg/day, Max : 30 g/day) in children with chronic functional constipation.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.93-107
• /
• 1998

Because of its stable quantity and quality, groundwater has long been a reliable source of drinking water for domestic users. Rapid economic growth and rising standards of living have in recent years put severe demands on drinking water supplies in Korea. Groundwaters that are currently being used for natural mineral water were hydrochemically evaluated and investigated in order to maintain their quality to satisfy strict health standards. There exist 15 natural mineral water plants in the Okcheon metamorphic belt. Characteristics of groundwaters are different from those of other areas in that electrical conductivity, hardness, contents of Ca, Mg and $HCO_3$are relatively high. The content of major cations is in the order of Ca>Mg, Na>K, whereas that of major anions shows the order of $HCO_3$>$SO_4$>Cl>F. The fact that the Ca-Mg-HCO$_3$type is mostly predominant among water types reflects that dissolution of carbonates that are abundantly present in the metamorphic rocks plays an important part in groundwater chemistry. Representative correlation coefficients between chemical species show Mg-$HCO_3$(0.92), Ca-$HCO_3$(0.88), Ca-Mg(0.80), Ca-Cl(0.78), Mg-$SO_4$(0.78), Ca-$SO_4$(0.71), possibly due to the effect by dissolution of carbonates, gypsum or anhydrite. Determinative coefficients between some chemical species represent a good relationship, especially for EC-(K+Na+Ca), Ca-$HCO_3$, Ca-Mg, indiacting that they are similar in chemical behaviors. According to saturation index, most chemical species are undersaturated with respect to major minerals, except for some silica phases. Groundwater is slightly undersaturated with respect to calcite and dolomite, whereas it is still greatly undersaturated with respect to gypsum, anhydrite and fluorite, Based on the Phase equilibrium in the systems $NA_2$O-$Al_2$$O_3$-$SiO_2$-$H_2$O and $K_2$O-$Al_2$$O_3$-$SiO_2$-$H_2$O, it is clear that groundwater is in equilibrium with kaolinite, evolved from the stability area of gibbsite during water-rock interaction. It is expected that chemical evolution of groundwater continue to proceed with increasing pH by reaction of feldspars, with calcite much less reactive.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.333-340
• /
• 2010

The Korean Dendropanax lacquer, made from a natural resinous sap from Dendropanax orbifera Lev., was used as a golden and transparent varnish for the traditional artifacts (armor uits, helmets, arrowheads, etc.) to make them be brilliant golden color. The cured film of the acquer has excellent protective properties such as weatherability, water resistance, and nticorrosive. But, one of disadvantages is that takes a long time and much energy to fulfill curing the lacquer. The chemical constituents of the lacquer contained conjugated diene compounds s the photopolymerizable monomers. These monomers easily polymerized in sunlight to form olden-colored, hard-coating films in a short time. Photooxidation may be one of the most mportant reactions in the chemistry of the lacquer. Although the Korean Dendropanax Lacquer hould be dried to a thoroughly dry stage to achieve optimal film properties, curing with elevated emperatures may be required for the protracted curing time at atmospheric temperature. So we ntended to accelerate the curing rate of the lacquer by dual curing of thermal and radiation uring. The effect of thermal initiator on the thermal curing reaction was evaluated by monitoring he changes in double bond peak with FT-IR. Then the curing rate of the lacquer blended with hermal initiator and photoinitiator together was measured during dual curing using a RPT with V spot curing machine. Thermal initiator not only accelerated the curing rate but also improved he physical property. And the curing rate of the Korean Dendropanax lacquer was improved by ual curing method of thermal and UV curing. According to these results, the application area of he Korean Dendropanax lacquer could be expanded to surface coatings for electronic devices uch as mobile phones or electronics.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.395-403
• /
• 2006

It is known that $MgAl_2O_4$ has higher resistance to moisture than MgO, in humid ambient MgO is chemically unstable. It reacts very easily with moisture in the air. In this study, the characteristic of $MgAl_2O_4$ and $MgAl_2O_4/MgO$ layers as dielectric protection layers for AC- PDP (Plasma Display Panel) have been investigated and analysed in comparison for conventional MgO layers. MgO and $MgAl_2O_4$ films both with a thickness of $1000\AA$ and $MgAl_2O_4/MgO$ film with a thickness of $200/800\AA$ were grown on the Cu substrates using the electron beam evaporation. $1000\AA$ thick aluminium layers were deposited on the protective layers in order to avoid the charging effect of $Ga^+$ ion beam while the focused ion beam(FIB) is being used. We obtained sputtering yieds for the MgO, $MgAl_2O_4$ and $MgAl_2O_4/MgO$ films using the FIB system. $MgAl_2O_4/MgO$ protective layers have been found th show $24{\sim}30%$ lower sputtering yield values from 0.244 up to 0.357 than MgO layers with the values from 0.364 up to 0.449 for irradiated $Ga^+$ ion beam with energies ranged from 10 kV to 14 kV. And $MgAl_2O_4$ layers have been found to show lowest sputtering yield values from 0.88 up to 0.109. Secondary electron emission coefficient(g) using the ${\gamma}$- FIB. $MgAl_2O_4/MgO$ and MgO have been found to have similar g values from 0.09 up to 0.12 for indicated $Ne^+$ ion with energies ranged from 50 V to 200 V. Observed images for the surfaces of MgO and $MgAl_2O_4/MgO$ protective layers, after discharge degradation process for 72 hours by SEM and AFM. It is found that $MgAl_2O_4/MgO$ protective layer has superior hardness and degradation resistance properties to MgO protective layer.

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.597-609
• /
• 2014

To find out the effect of commercially available energy drinks on tooth enamel erosion, analyzed pH, buffering capacity, and the content of some of the inorganic components selecting 4 energy drinks that has high affinity of the products currently being sold. In addition, by observing the degree of erosion before and after immersion in energy drink by surface microhardness and scanning electron microscope (SEM) the results were as follows: Acidity of energy drink 'Burn Intense' was the lowest as $2.78{\pm}0.01$ highest on distilled water as $6.475{\pm}0.01$. 'Burn Intense' buffering capacity was $3.48{\pm}0.155$ at pH 5.5, $1.88{\pm}0.15$ at pH 7.0 which is the highest, and 'Hot6' was $1.71{\pm}0.37$, $1.23{\pm}0.35$ on each of it showing the lowest points. Ca content on energy drink was the highest at 'Volt Energy' as ($77.21{\pm}2.70mg/kg$), the lowest at 'Hot6' as ($0.98{\pm}0.05mg/kg$). P content was the highest on 'Hot6'($1.34{\pm}0.05mg/kg$) and detected at 'Red Bull'. Enamel surface hardness variation of the energy drinks before and after immersion showed rapid decrease at 'Red Bull' ($66.65{\pm}35.60$), and 'Volt Energy' ($61.96{\pm}31.42$), 'Burn Intense' ($58.53{\pm}24.84$), 'Hot6' ($53.99{\pm}60.26$) was in order. Distilled water, the control group, showed significant difference with the experimental group (p<0.05). But there was no significant difference between energy drinks. At SEM observation and analysis, 'Burn Intense' was the most severe demineralization, 'Volt Energy', 'Hot6', 'Red Bull', distilled water was in order. In the above results, taken together there were no statistically differences between energy drinks but significant difference in comparison with distilled water. In addition, at SEM observation and analysis all energy drink caused dental erosion, especially 'Burn Intense', has the lowest acidity, was serious. Thus, it is believed to provide a variety of oral health education and information about energy drinks that can affect the erosion of the teeth so public have the right to be recognized and reasonable dental care.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.681-686
• /
• 2012

This study conducted autoclave and microwave treatments on dough to determine if there were any changes in quality after the dough was cooked into bread. Wheat dough after secondary fermentation was treated with a microwave (1 min), an autoclave (30 min), and both an autoclave and microwave (30 min/1 min). We then measured the pH, moisture content, color, texture, and sensory evaluation. The results showed that pH was slightly decreased when it was treated in an autoclave (baking and no baking) and autoclave/microwave (baking and no baking). When microwaved and baked, the moisture content most decreased compared to the control. In crust color, there were no considerable differences in lightness, redness, or yellowness compared to the control, except when microwaved (no baking). The lightness of the crumb color decreased, while redness and yellowness increased, when dough was treated with an autoclave (baking and no baking) and autoclave/microwave (baking and no baking). Hardness, gumminess, chewiness and shear force were significantly increased when dough was treated with an autoclave (baking and no baking) and autoclave/microwave (baking and no baking) compared to the control. In the sensory evaluation, there were no considerable differences in color, aroma, taste, or overall preference when microwaved and baked. Color, aroma, shape, and overall preference were the worst when the dough was treated with autoclave/microwave (baking and no baking). These results suggest that autoclaving and microwaving may reduce the quality of bread, and countermeasures to this problem are necessary.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.5
• /
• pp.625-632
• /
• 2008

Rye-wheat mixed bread samples made with substitutions of 20, 40, 60 and 80% sourdough, and control made with the addition of naturally fermented raisin extract, were examined for quality characteristics such as pH, total titratable acidity, fermentation power of dough expansion, specific volume, baking loss, water activity, color, texture, external and internal surface appearance, and sensory qualities, in order to determine the optimal ratio of sourdough in the formulation. As the incubation time of sourdough increased, pH decreased, while total titratable acidity increased. The pH of rye-wheat mixed doughs decreased with increasing sourdough content, but total titratable acidity increased. The rye-wheat mixed breads prepared with substitutions of sourdough had higher pH and lower total titratable acidity than the control group. Fermentation power of dough expansion of rye-wheat mixed doughs increased with increasing incubation time. Specific volume was maximum on the 20% substitution sourdough. Baking loss was inferior with the 80% substitution sourdough. Water activity and lightness was minimum on the control group. The higher amounts of sourdough showed the higher tendency of lightness, redness and yellowness. In the texture characteristics, hardness, gumminess, and chewiness was minimum on the control group and tended to increase with higher substitution of sourdough. Substitution of sourdough showed decrease adhesiveness. Fracturability, cohesiveness, and resilience of all rye-wheat mixed breads were not significantly different. Springiness was maximum on the 20% substitution sourdough and minimum on the 40%. A side of loaf of rye-wheat mixed breads, except for 20%, had a poor break and shred. In sensory evaluation, as substitution amount of sourdough increased, the scores of color and consistency of crumb, uniformity of crumb pore, gumminess, and overall acceptability decreased; while the density of crumb pore, springiness of crumb, aroma of rye flour, sourness, and bitterness showed the reverse effect; the 20, 40, and 60% sourdough samples obtained fairly good scores. In conclusion, these results indicated that $20{\sim}60%$ of sourdough could be very useful as a substitute for baker's yeast in developing rye-wheat mixed bread.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.1
• /
• pp.92-99
• /
• 2017

People have become more interested in fiber intake due to the rise of noncommunicable diseases such as hyperlipemia and abdominal obesity. This study was carried out to develop dacquoise incorporating different amounts of rice bran dietary fiber (5%, 10%, 15%, and 20%). Dacquoise characteristics such as viscosity, specific volume, moisture content, color, and texture were measured. Consumer acceptance and check-all-that-apply on characteristics of dacquoise with rice bran dietary fiber were observed. Increasing amounts of rice bran dietary fiber resulted in increasing viscosity of batter as well as higher specific volume, lightness, and hardness of finished product. On the contrary, yellowness and redness of dacquoise increased as the amount of rice bran dietary fiber increased. While there was no effect of rice bran dietary fiber on moisture content (range of 26.53~25.35%). According to the consumer acceptance test, dacquoise with 5% of rice bran dietary fiber showed the highest liking score in color and overall acceptance (5.9 and 5, respectively). The findings from the principle component analysis of principle component (PC) 1 (71.04% explanation) showed that as rice bran dietary fiber increased, texture of the product got drier, and consumers described the product with 20% rice bran dietary fiber as cotton mouth and 5% rice bran dietary fiber as sticky. PC2 (16.54% explanation) demonstrated 5% and 10% rice bran dietary fiber, and dacquoise had nutty and soybean notes while 15% and 20% rice bran dietary fiber dacquoise had flour, bitter, and salty flavors. Based on these results, the optimum addition level of rice bran dietary fiber for dacquoise is 5%.

• Journal of Technologic Dentistry
• /
• v.20 no.1
• /
• pp.37-49
• /
• 1998

The specimens used were Ag-25 Pd-15 Cu ternary alloy and Au addition alloy. These alloys were melted and casted by induction electric furnace and centrifugal casting machine in Ar atmosphere. These specimens were solution treated for 2hr at $800^{\circ}C$ and were then quenched into iced water, and aged at $350{\sim}550^{\circ}C$ Age- hardening characteristics of the small Au-containing Ag-Pd-Cu dental alloys were investigated by means of hardness testing. X-ray diffraction and electron microscope observations, electrical resistance, ergy dispersed spectra and electron probe microanalysis. Principal results are as follows : Hardening occured in two stages, i.e., stage I in low temperature and stage II in high temperature regions, during continuous aging. The case of hardening in stage I was due to the formation of the $L1_0$ type face-centered tetragonal PdCu-ordered phase in the grain interior and hardening in stage I was affected by the Cu concentration. In stage II, decomposition of the ${\alpha}$ solid solution to a PdCu ordered phase($L1_0$ type) and an Ag-rich ${\alpha}2$ phase occurred and a discontinuous precipitation occurred at the grain boundary. From the electron microscope study, it was conclued that the cause of age-hardening in this alloy is the precipitation of the PdCu ordered phase, which has AuCu I type face-centered tetragonal structure. Precipetation procedure was ${\alpha}{\to}{\alpha}+{\alpha}_2+PdCu {\to}{\alpha}_1+{\alpha}_2+PdCu$ at Pd/Cu = 1.7 Ag-Pd-Cu alloy is more effective dental alloy as ageing treatment and is suitable to isothermal ageing at $450^{\circ}C$.