• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.11-21
• /
• 2005

The purpose of this study was to identify the species of the woods used in the main building (Daewoongjeon) of Bulgapsa temple in YeongGwang. Eighty eight woods sampled were divided into four parts; pillars(21), rafters(19), purlins(16) and other wood elements(12). Four species were identified; Pinus spp. (hard pines; diploxylon), Abies spp., Quercus spp. and Zelkova serrata Makino. Pillars and corner-angle rafters were mainly Zelkova; however, other wood elements were mostly Pinus spp. The high ratio of Zelkova in this building would be ascribed to the preference of this species to pines owing to its superior quality before the late Chosun Dynasty.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.4
• /
• pp.43-50
• /
• 1999

The safety-evaluation of ancient wood structures has been executed with only visual inspection. The application of NDE(nondestructive evaluation) is required because the visual inspection has many restrictions. Among many NDE techniques, the stress wave technique was used in this research. This study focused on evaluating the extent of decay in members of ancient structures, using stress wave nondestructive technique. For application of stress wave technique to ancient structures, the threshold time which divides members into categories according to degree of decay should be determined in advance. Stress wave timer (Metriguard Model 239A) was used in this study, specimens used in this research were the members obtained from six ancient structures. All specimens were identified as Hard Pine(Pinus densiflora S. et Z. or Pinus thunbergii P.) by microscope. Each member was tested with stress wave passing radially through the pith. In this study, the stress wave time of $12{\mu}s$/cm could distinguish between sound and decayed specimens with accuracy of 77.5 percent. Also, decayed specimens could be separated into moderate and severe categories by stress wave time of $20{\mu}s$/cm. Among the three decay location groups (exterior, mixed, interior), the exterior group could be classified into sound, moderate and severe decay with the greatest accuracy. Stress wave transit time was not sensitive to small decay pockets located in interior of the member.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.91-98
• /
• 2006

The purpose of this study is to investigate the opacity and printing strength of MG paper overlaid plywood. The printing strength of ink on MG paper can be evaluated effectively by a formula $E^{*2}=[(L^{*})^{2}+(a^{*})^{2}+(b^{*})^{2}]^{1/2}$ that we proposed. Higher E value indicates good printing strength of ink-on-paper. We also assess the real color of translucent printed MG paper with a formula CIE ${\bigtriangleup}E^{*}$ (color difference between a pile of same paper to be opaque and fancy paper laminated board). In addition, the color difference on paper surface caused by the color of wood-based board (bottom) can be evaluated by a formula of Pc. No. Generally, an acceptable appearance quality of fancy boards is ${\bigtriangleup}E^{*}$ <2.0 and small Pc.No. value. The experimental results showed that Japan-made MG papers -J1, J2 and J3 have better printing strength and gloss than that of Taiwan-made paper (T1). The reason for this was that Taiwan-made paper has poor printing strength and low gloss, which might be correlated to the fiber compositions in paper. Higher printing strength can be seen for short fiber containing handsheets when comparing to that of handsheets. Nonetheless, low-freeness sheets gives better printing strength than that of high-freeness sheets. High-opacity MG paper gives good opacifying effect to the fancy paper laminated wood-based boards. Comparing the surface color of 2 kinds of fancy paper laminated boards, paperboard T1 laminated with high-opacity fancy paper showed slight color difference. The same results can be seen for $??g/m^{2}$ handsheets. Higher-opacity Acacia and Eucalyptus bleached sulfate pulps (short fiber) gives higher opacifying effect on the plywood when comparing to Northan pine and Radiata pine sulfate pulps(long fiber). The former ones also showed small color differences when comparing the color differences between the color of fancy paper and laminated paper board. Additionally, the color of bottom plywood can't be shown through for the high-opacify surface paper adhered to. Besides, the PC No of the base paper laminated board is small as well. Apparently, we can add colorants to the binders for the manufscture of various handsheets ($30g/m^{2}$) with various pulp mix ratios to increase the opacity of paperboards to certain extents. When we using yellow and brown binders in paper laminated board, the color difference between Acacia and Eucalyptus handsheets overlaid boards decreasing to 2.0 (acceptable ${\bigtriangleup}E^{*}$ <2.0, hard to discern), but not much improvement for Northern and Radiata pines. Definitely, show-through defects can be discernible for lower opacity papers. In general, admirable printing strength of fancy paper by which glued to plywood can be made with high-opacity paper and colored binders techniques.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.535-548
• /
• 2016

Hanging paintings are used for special ceremonies in Buddhist temple. They are stored in special storage box called "Gwaebulgwae" which means storage box for a hanging painting. Studies regarding pigments, background fibers and textiles of hanging paintings are carried out with many data in the field of conservation science. However, there are only few studies for the axes of hanging paintings and storage boxes. In this study, species identification for wooden axes of hanging paintings and storage boxes from the Joseon dynasty are carried out. Hanging painting of Beopjusa temple, Magoksa temple, Sudeoksa temple, Gaeamsa temple, Sudosa temple, Bukjangsa temple, Dorimsa temple, Tongdosa temple and Daeryeonsa temple are selected. Sampling is carried out from the axes of hanging paintings and storage boxes. 81 samples are collected from hanging paintings and storage boxes. As a result, 51 hard pines of Pinus spp., 8 Tilia spp., 6 Juniperus spp., 5 soft pines of Pinus spp., 4 Tsuga spp., 3 Pseudotsuga spp., 2 Berchemia spp., 1 Pyrus spp., 1 Bambusoideae are identified. Tsuga spp. and Pseudotsuga spp. might be used in conservation and restoration works in modern times because those species do not naturally grow in Korea. Most hanging paintings and storage boxes are made of hard pine. Also, some of are made of Tilia spp., because it represents the symbol of Buddha. Some unique kinds of trees used for wooden sculpture are identified, such as Juniperus spp. and Berchemia spp. Authentic conservation and restoration works could be carried out with this data-base.

• Journal of the Korean Society of Food Culture
• /
• v.26 no.5
• /
• pp.455-467
• /
• 2011

The main purpose of this study was to survey the various kinds of recipes for pheasant found in seventeen Korean cookbooks published from the 1800's to the 1990's. There were 95 pheasant recipes found in the literature which could be classified into three major groups: cooking with moist heat, cooking with dry heat, and other. The three major groups were then broken down into thirteen smaller groups. A detailed look at the frequency of terms in each recipe shows that Gui Sanjeok (grilled Korean shish kebabs) appears 24 times, Guk Tang and Jeongol (soup and stew) 23 times, Kimchi (fermented cabbage) 11 times, Po (jerky) 9 times, Jorim (boiled in soy sauce) 7 times, Jjim (steamed) 6 times, Bokeum (stir-fried) 5 times, Twigim (deep-fried) 3 times, Buchim (fried) 2 times, Jigae jijim (stewed) 2 times, and Jang (paste), Myeon (noodles), Gooum (boiled) and Yeot (Korean hard taffy) 1 time each. The main ingredient is always the pheasant. We investigated the use of the whole pheasant cooked, how to slice and tenderize pheasant meat, use the meat only, or use only certain parts. Depending on the characteristics of cooking recipes, pheasants with thin, soft bones and organs were investigated for cooking. Substituted materials were used for a few of the vegetables, meat, and seafood in the recipes, and seem to go well together. Garnishes used included pine nut powder and fried eggs. Seasoned salt, soy sauce, pepper, sesame, sesame oil, chopped onion, garlic, and ginger were also reported to have been used.

• Journal of the East Asian Society of Dietary Life
• /
• v.3 no.1
• /
• pp.12-17
• /
• 1993

This book is named 'The Ryuk-Jab-Rok' because it was written in the last page of 1820's almanac. This book is written purely in Korean and has not been published yet. This book comprises twenty eight items, among which there are eight items of vegetable preserving method, ten items of Jook preparation methods(a kind of cereal soup), nine items of Pyun-Myun methods(a kind of rice cakes and noodles) and Yak-Bab(a kind of spiced rice). In vegetable preserving method, the eggplant, the cucumber and a songi mushroom were preserved with the drying method., A radish, a sorojangii, and the root of white cabbage were used with the cold temperature preservation. A garlic was dried after salting. The sprouts of DooRub, which were coming in the hot room, were used. In the Jook preparations, there were five animal materials which were lamb, chick, crudian, oyster and abalone. In nine Pyun-Myun methods, Jap-Gua-Sil was illegible because the letters were not clear. Among eight items, the stick rice was used in four cases, the regular rice in two cases. The ground pine nuts, honey and the Chinese date were used most ofter. And the sesame salt and the chestnut were next. The analysis of the terms I this book revealed that 26 items were used for cooking processes. And it also showed us that there were seven kind of cutting procedure and eight kinds of heating procedure. The shapes and size of foods were revealed at only three places in all items. The one-chi(chi ; abut three cm) and three-Ja(Ja ; about thirty cm) which the terms represent the length were revealed twice and once respectively in this book. In the taste description, 'the good', the most common word, was used in seven times, and which was the most frequently introduce case. The measuring unit is hard to revive since the measurements were taken by the container, which were Jong-Ja, Sabal and Tang-gii, then in use. Fifteen kinds of containers and cookers were used for preparing foods. And all of them are now I use.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.33-40
• /
• 2011

In this study, we identified wood species used in manufacturing Streetcar No. 381 from Seoul Museum of History. This Streetcar No. 381 is an important cultural heritage as one of the 2 streetcars remained in Seoul. It is important to preserve this streetcar through restoration and to maintain without any damage or degradation. The information on species of wood members should be needed for its original restoration. Thus, 6 interior and 1 exterior wood members were sampled and identified microscopically. Among the 7 wood members identified, 2 were found to be douglas-fir ($Pseudotsuga$), 2 lauan ($Shorea$), 1 exotic hard pine of ponderosa group ($Pinus$), 1 larch ($Larix$), and 1 oak of cerris group ($Quercus$), respectively.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.326-332
• /
• 2020

The this study's objective was to conduct species identification and tree-ring dating for the wood elements of Daewoong-jeon(main temple), Hwagye-temple, Seoul, Korea. Most of the wood elements were made from Pinus spp.(hard pine). However, one large beam was constructed from Abies spp.. For the tree-ring dating, cores were taken from the elements using a drill, and ring-width plots of individual samples were produced with the TSAP software program. The tree-ring dating results showed that, the date of the outermost ring of most elements (20 elements), including beams and pillars, were from AD 1839 to 1870. Among them, five elements had bark, and felling dates were AD 1868 and 1869. These dates confirmed the historical records that Daewoongjeon was rebuilt in AD 1870 from the records of hidden materials(Bokjangmul) in Jongdori by the survey 2012.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.192-200
• /
• 2022

This study aimed for species identification and tree-ring dating and radiocarbon dating of wooden warehous materials excavated from Baengnyeongsanseong in Geumsan. The species of 83 wooden materials were identified as 38 Platycarya spp., 34 Cerris Section, 8 Prinus section, 2 Hard pine, and 1 Kalopanax pictus. After cross-dating of 5 Cerris Section samples with the TSAP program, one Cerris Section chronology (GSQU 1S) was constructed. To identify the exact date, one material which show many tree-ring (GSQU 05) was analyzed by radiocarbon dating using wiggle match. As a result of radiocarbon dating, the outermost edge of east beam (GSQU 05) was found to be A.D. 575-655 or A.D. 665-685. The radiocarbon dating of wooden warehouse material was consistent with the archaeologically estimated date.

• Conservation Science in Museum
• /
• v.10
• /
• pp.43-61
• /
• 2009

The Buyeo National Museum was requested conservation treatment for wooden objects excavated from three Baekje archeological sites: Neungsan-ri, Ssangbuk-ri, and Gungnamji Pond. Prior to conservation treatment, analysis was conducted to identify the species used. The results of the analysis revealed wood from diverse species of trees including Hard pine, Cryptomeria japonica D. Don, Zelkova serrata Makino, Quercus spp., Platycarya strobilaceae S. et Z., Castanea spp., Torreya nucifera S. et Z., Taxus cuspidata S. et Z., and Salix spp. A high percentage of the objects were made of Cryptomeria japonica D. Don., a species native to Japan, which indicates that exchange with Japan was active at that time. Among the wooden objects, we analyzed lacquer fragments from six pieces of lacquerware, and the characteristics of the lacquer fragments were peculiar to specific artifacts. Most of the fragments were thicker than 100 ㎛. Pure lacquer and mixed black pigment were used. Infrared spectroscopy of the lacquered wooden fragments revealed that they had a very similar absorption band as refined lacquer, confirming that they were painted with lacquer. For their conservation, we immersed the objects in a high molecular weight aqueous solution of PEG#3,350 (10% → 50%) to strengthen them before vacuum freeze-drying.