• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.3
• /
• pp.356-363
• /
• 2014

This paper covers improvement of the humanoid robot platform HUBO2, known as the HUBO2+. As a necessity of the growth of the humanoid platform, a robust, reliable and user friendly platform is needed. From this standpoint, HUBO2+ is the most improved humanoid robot platform in the HUBO series. The mechanical design has been changed to increase the movable range and to stop joint compulsion. Additionally, all of the electrical parts are re-designed to be un-breakable in an unexpected situation. A smart power controller with robot status check panel is attached on the back. Additionally, a diagnosis tool, the HUBO-i, has been developed. Moreover, each joint motor controller of HUBO2+ has a Protection Function and a PODO system is provided for handling the robot easily.

• Nuclear Engineering and Technology
• /
• v.41 no.1
• /
• pp.125-134
• /
• 2009

This paper presents details on a tube inspection robotic system and a positioning method of the robot for a steam generator (SG) in nuclear power plants (NPPs). The robotic system is separated into three parts for easy handling, which reduces the radiation exposure during installation. The system has a supporting leg to increase the rigidity of the robot base. Since there are several thousands of tubes to be inspected inside a SG, it is very important to position the tool of the robot at the right tubes even if the robot base is positioned inaccurately during the installation. In order to obtain absolute accuracy of a position, the robot kinematics was mathematically modeled with the modified DH(Denavit-Hartenberg) model and calibrated on site using tube holes as calibration points. To tune the PID gains of a commercial motor driver systematically, the time delay control (TDC) based gain tuning method was adopted. To verify the performance of the robotic system, experiments on a Framatomes 51B Model type SG mockup were undertaken.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.810-816
• /
• 2007

A security robot system named EGIS-SR is a mobile security robot through one of the new growth engine project in robotic industries. It allows home surveillance through an autonomous mobile platform using onboard cameras and wireless security sensors. EGIS-SR has many sensors to allow autonomous navigation, hierarchical control architecture to handle lots of situations in monitoring home surveillance and mighty networks to achieve unmanned security services. EGIS-SR is tightly coupled with a networked security environment, where the information of the robot is remotely connected with the remote cockpit and patrol man. It achieved an intelligent unmanned security service. The robot is a two-wheeled mobile robot and has casters and suspension to overcome a doorsill. The dynamic motion is verified through $ADAMS^{TM}$ simulation. For the main controller, PXA270 based hardware platform based on linux kernel 2.6 is developed. In the linux platform, data handling for various sensors and the localization algorithm are performed. Also, a local path planning algorithm for object avoidance with ultrasonic sensors and localization using $StarGazer^{TM}$ is developed. Finally, for the automatic charging, a docking algorithm with infrared ray system is implemented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.4
• /
• pp.314-321
• /
• 2005

In this paper an intelligence embedding quadruped pet robot is described. It has 15 degrees of freedom and consists of various sensors such as CMOS image, voice recognition and sound localization, inclinometer, thermistor, real-time clock, tactile touch, PIR and IR to allows owners to interact with pet robot according to human's intention as well as the original features of pet animals. The architecture is flexible and adopts various embedded processors for handling sensors to provide modular structure. The pet robot is also used for additional purpose such like security, gaming visual tracking, and research platform. It is possible to generate various actions and behaviors and to download voice or music files to maintain a close relation of users. With cost-effective sensor, the pet robot is able to find its recharge station and recharge itself when its battery runs low. To facilitate programming of the robot, we support several development environments. Therefore, the developed system is a low-cost programmable entertainment robot platform.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.667-668
• /
• 2012

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.230-234
• /
• 1989

This paper presents the design of a prototype robot and architecture of a distributed control system. The robot, named as KAEROT, has been developed for the purpose of the reduction of personal radiation exposure and the remote maintenance tasks in nuclear facilities. The mobile system with robotic manipulator has been designed to go up and down stairs. For the dextrous handling, this manipulator will be designed as a redundant type to act like a human arm. Manipulator control system is to be extended easily for further usage with a modular architecture to get independency and reliability by minimizing EMI effects.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.344-351
• /
• 2014

In order to accomplish complex navigational commands, humanoid robot should be able to modify its walking period, step length and direction independently. In this paper, a novel walking pattern generation algorithm is proposed to satisfy these requirements. Modification of the walking pattern can be considered as a transition between two periodic walking patterns, which follows each navigational command. By assuming the robot as a linear inverted pendulum, the equations of motion between ZMP(Zero Moment Point) and CM(Center of Mass) state is easily derived and analyzed. After navigational command is translated into the desired CM state, corresponding CM motion is generated to achieve the desired state by using simple ZMP functions. Moreover, when the command is not feasible, feasible command is alternated by using binary search algorithm. Subsequently, corresponding CM motion is generated. The effectiveness of the proposed algorithm is verified by computer simulation.

• The Journal of Korea Robotics Society
• /
• v.1 no.2
• /
• pp.117-124
• /
• 2006

In this paper, we develope the navigation system for patrol robots in indoor environment. The proposed system consists of PDA map modelling, a localization algorithm based on a global position sensor and an automatic charging station. For the practical use in security system, the PDA is used to build object map on the given indoor map. And the builded map is downloaded to the mobile robot and used in path planning. The global path planning is performed with a localization sensor and the downloaded map. As a main controller, we use PXA270 based hardware platform in which embedded linux 2.6 is developed. Data handling for various sensors and the localization algorithm are performed in the linux platform. Also, we implemented a local path planning algorithm for object avoidance with ultra sonar sensors. Finally, for the automatic charging, we use an infrared ray system and develop a docking algorithm. The navigation system is experimented with the two-wheeled mobile robot using North-Star localization system.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.1
• /
• pp.75-81
• /
• 2011

Today, FPD manufactures are eager to develop larger and larger glass to become the prime market leader. To follow this need, larger AMHS(Automated Material Handling System) development is essential. The radical increase of glass/cassette weight puts a lot of pressure on stocker robot's dual arms, which can cause a damage of expensive glasses and contaminate a clean room facility. In this paper the axiomatic design method is used to institute a design guideline to evenly distribute a pressure throughout the stocker robot structure.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.275-278
• /
• 1987

In this paper, a programming system for SCARA-type robots is designed, consisting of robot language, computational facilities and programming tools for handling interconnection environments. In designing the robot language, CLRC(C Library for Robot Control) is introduced, using the general-purpose language 'C' as base programming language. Also the motion primitives for Continuous Path control as well as Point-To-Point motion arc included. By means of frame and homogeneous transformations the system is capable of applying the SCARA-type robot efficiently and easily for any given task.