• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.181-192
• /
• 1995

In this study, we introduce new types of planar 2 degree-of-freedom robot modules resembling the musculoskeletal structure of the human arm with actuation redundancy. First, for the given actuator sizes the performance analysis for the manipulator with redundant actuation and without redundant actuation is performed with respect to maximum load handling capacity, maximum hand velocity, and maximum hand acceleration. Secondly an algorithm which decides optimal actuator sizes for the given operational performances is introduced, and the optimal actuator sizes for a robot module with four redundant actuation are obtained. The algorithms employed in this paper will be useful to analyze the robot performances and to determine the actuator sizes for general robot manipulators.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.1
• /
• pp.32-42
• /
• 2005

In this paper, to improve the efficiency of welding and user convenience in the shipbuilding industry, a PC-based off-line programming (OLP) technique and the development of a robot transfer unit are presented. The developed OLP system is capable of not only robot motion simulations but also automatic generations of a series of robot programs. The strength of the developed OLP system lies in its flexibility in handling the changes of the welding robot's target objects. Moreover, for a precise transfer of the robot to a desired location, an auxiliary mobile platform named a robot-origin-transfer-unit (ROTU) was developed. To enhance the cornering capability of the platform in a narrow area, the developed ROTU is equipped with 2 steering wheels and 1 driving wheel. Both the OLP and the ROTU were field­tested and their performances were proven successful.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.909-915
• /
• 2022

In this paper, a robot automation technology for chemical tank lorry unloading is presented. Handling chemical coupler between tank lorry and ACQC system may be hazardous or toxic to human operators, therefore robot automation is essential. Due to tight tolerance between couplers, even small pose error may result in very large internal force. In order to resolve the problem, compliance between male and female couplers should be introduced with 6-axis compliance device with F/T sensing. The proposed robot automation system consists of a collaborative robot, 6-ax is compliance device with F/T sensing, linear gripper, and robot vision. The position/force control algorithm and experimental results for assembling chemical couplers are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.756-760
• /
• 2005

By development of a robot technology, personal robot is being developed very actively. Various infra-technologies are accumulated in hardware and software how by internal a lot of research and development efforts, and it is circumstance that actual commodity is announced. But, personal robot is applied to be acting near human, and takes charge of safety and connected directly a lot of works of home security, gas-leakage, fire-warning facilities, or/and etc. So personal robot must do safe and stable action even if any unexpected accidents are happened, important functions are always operated. In this paper, we are wished to show design structures for supporting fault-tolerant operation from our real-time robot middleware viewpoint. Personal robot, in being developed, was designed by module structure to do to interconnect and to interoperate among each module that is mutually implemented by each research facilities or company. Also, each modules can use appreciate network system that is fit for handling and communicating its data. To guarantee this, we have being developed a real-time network middleware, for especially personal robot. Recent our working is to add and to adjust some functions like connection management, distributed routing mechanism, remote object management, and making platform independent robot application execution environment with self-moving of robot application, for fault-tolerant personal robot.

• The Journal of Korea Robotics Society
• /
• v.7 no.1
• /
• pp.9-19
• /
• 2012

This paper proposes a performance index for the multiple shape object handling of dual arm manipulator to determine whether a robot is good or not. When the dual-arm manipulator grasps a fixed object and is posed, the dual-arm manipulator should procure a space to freely control the manipulator. As a performance evaluation parameter, each joint torque from current sensor signal is utilized. From the current information, torque and energy for each joint are estimated. In this paper an performance index for an unstructured object is defined by an energy-cost function, and stability analysis for each motion is derived by the maximum force to the object. The maximum force to the object is computed by the inertia of object and acceleration information of end-effector. The acceleration data are derived by the double derivation of each encoder signal. Manipulability measure which implies how efficiently the dual-arm manipulator can move with the grasped object, can be represented by the intersection of the two manipulability ellipsoids for the left and right arms. Effectiveness of the proposed algorithm has been verified through the practical simulations and real experiments.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.455-458
• /
• 1988

In this paper, a grasping force control of robot hand is presented with consideration of workpiece dynamics. It is difficult to control a manipulator without the knowledge of Its dynamics, because its handling with unknown workpiece may bring about overshoots and vibrations. Then it is necessary to adjust control gains according to the handling workpieces in order to achieve good control performances. The authors propose a new control strategy which uses adaptive observer and VSS (${\underline{V}}ariable$ ${\underline{S}}tructure$ ${\underline{S}}ystem$) controller to subdue these overshoots and vibrations. Some simulations of the proposed method are carried out for a grasping system to control the grasping force to various workpieces, whose dynamics cannot be known in advance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.9
• /
• pp.785-798
• /
• 2004

This paper introduces the development of a range sensor based integrated navigation system for a multi-functional indoor service robot, called PSR (Public Service Robot System). The proposed navigation system includes hardware integration for sensors and actuators, the development of crucial navigation algorithms like mapping, localization, and path planning, and planning scheme such as error/fault handling. Major advantages of the proposed system are as follows: 1) A range sensor based generalized navigation system. 2) No need for the modification of environments. 3) Intelligent navigation-related components. 4) Framework supporting the selection of multiple behaviors and error/fault handling schemes. Experimental results are presented in order to show the feasibility of the proposed navigation system. The result of this research has been successfully applied to our three service robots in a variety of task domains including a delivery, a patrol, a guide, and a floor cleaning task.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.132.6-132
• /
• 2001

This paper aims to derive a mathematical model of the dynamics of handling tasks in field robot which stable grasping and manipulates a rigid object with some dexterity. Firstly, a set of differential equation describing dynamics of the manipulators and object together with geometric constraint of tight area-contacts is formulated by Lagrange equation. Secondly, problems of controlling both the internal force and the rotation angle of the grasped object under the constraints of area-contacts of tight area-contacts are discussed. The effect of geometric constraints of area-contacts on motion of the overall system is analyzed and a method of computer simulation for overall system of differential-algebraic equations is presented. Thirdly, simulation results are shown and the effects of geometric constraints of area-contact is discussed.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.231-233
• /
• 2007

In this paper we present a new visual approach for the robust bin-picking in a two-step concept for a vision driven automatic handling robot. The technology described here is based on two types of sensors: 3D laser scanner and CCD video camera. The geometry and pose(position and orientation) information of bin contents was reconstructed from the camera and laser sensor. these information can be employed to guide the robotic arm. A new thinning algorithm and constrained hough transform method is also explained in this paper. Consequently, the developed bin-picking demonstrate the successful operation with 3D hole object.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.4
• /
• pp.573-581
• /
• 1999

액체 금속로(LMIR) 핵연료교환장치의 기본설계를 위해서는 여러 분야(예를 들면, 기구학, 동역 학, 재료역학 등)의 해석을 동시에 수행해야 한다. 그러나 이와 같은 해석들은 각각 별개로 연속적으로 수행되는 것이 아니라, 상호 유기적인 연관을 갖고 수행되어야 한다. 이와 같은 해석에 적합한 기법이 MDO 기법이다. 본 논문에서는 MDO기법에 의한 핵연료교환장치 구조해석의 한 단계로 핵연료교환장치의 기구 동역 학 해석을 수행하여 핵연료 교환장치 작동에 대한 기구운동학적 특성 및 동역학적 특성을 분석하였다. 분석결과 해석대상 핵연료교환장치는 예상한대로 원활하게 작동됨이 확인되었다. 아울러 이 분석 결과를 토대로 핵연료교환장치의 정적 휨 변형을 구하기 위한 재료역학해석에서 요구되는 정적구조를 결정하였다.