• 한국정밀공학회지
• /
• 제14권10호
• /
• pp.91-101
• /
• 1997

In this paper, the complexity of the product is evaluated quantitatively regarding to access of assembly tools and handling of part. To evaluate the complexity of the product, we grasped factors that could influence on the complexity of the product with access and handling, and then we determined the criteria of comparison for each complexity factor. The criteria compare the complexities of product alternatives on each access and handling.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.250-254
• /
• 2002

It is conducted to analyze vibration loads on KSR-III(KSR: Korea Sounding Rocket) and its major segments during their ground transportation and various handling process. These loads may be different from the real flight environment. Inadequate assessment of these loads can cause not only local damages on the rocket system but also the critical problem like flight mission failure. Therefore, transportation and handling loads must be considered during design and attenuated to ensure that the rocket structural damage does not occur. This work is concerned with the generation of criteria and prediction of transportation and handling loads for KSR-III. The results show that the shipping container is well designed to satisfy the design requirements. The maximum vibration level recorded during whole transportation and handling for KSR-III is less than 2g, the criteria of KSR-III movement condition.

• 한국위험물학회지
• /
• 제6권2호
• /
• pp.1-6
• /
• 2018

The use of chemicals to enhance and improve life is a widespread practice worldwide. But alongside the benefits of these products, there is also the potential for adverse effects to people or the environment. Thus, If anyone handles hazardous chemicals, they should adhere to specific criteria for hazardous chemicals. This study used hazard statement(H-code) and precautionary statement(P-code) to set specific criteria for handling chemicals. According to the UN GHS, hazard statement means a statement assigned to a hazard class and category that describes. And a precautionary statement is a phrase which describes recommended measures that should be taken to minimize or prevent adverse effects resulting from exposures to a hazardous product, or improper storage or handling of a hazardous product. The study suggests the treatment criteria(Public Notice) of 785 types of hazardous chemicals managed by the Chemical Control Act.

• 한국의류학회지
• /
• 제28권5호
• /
• pp.603-614
• /
• 2004

The purpose of this study was to investigate the criteria of evaluating clothing and web service on internet shopping malls related to consumers' shopping behavior, This study surveyed consumers who have an experience of buying products on the internet shopping mall and the questionnaire and judgment sampling was used. The subjects were 305 men and women living in the metropolitan area. Method of data analysis were factor analysis, t-test, ANOVA, Duncan test and descriptive statistics. The results were as follows: the items buy from the internet were t-shirts, blouses, knits, skirts and pants. The reasons for buying clothing on the internet were good prices, time saving, door-to-door delivery, while the reasons for not buying on the internet were worries about differences between the product shown on the screen and the actual one, quality guarantee, delivery accident and inconvenience in exchange and refund. Among the differences of clothing evaluation criteria according to internet shopping behavior, significant differences were found in the esthetic criteria and the quality performance criteria according to internet using hours, and in the esthetic criteria according to buying experiences. Among the differences of web service evaluation criteria according to internet shopping behavior, the differences among the groups were found in the reliance criteria, the product reference criteria, the order processing criteria and the handling after purchase criteria according to internet using hours. The significant differences were found in the handling after purchase criteria and the promotion$.$policy criteria according to buying experience, and in the promotion$.$policy criteria according to times of purchase.

• 한국기계가공학회지
• /
• 제9권3호
• /
• pp.1-7
• /
• 2010

The aim of this research is to evaluate movement and path characteristics of developed heavy duty handling robot using laser tracker(API T3) according to the ISO 9283 robot performance evaluation criteria. As carry out 3D modeling and simulation using CATIA, a test cube was set up to select moving and measuring range of robot. Performance test for pose and distance accuracy, path and path velocity accuracy under payload zero and 440kgf was accomplished. The resulted output data show the reliability of the developed robot.

• 대한인간공학회지
• /
• 제29권5호
• /
• pp.819-829
• /
• 2010

By referring thirty-seven previous studies on manual material handling (MMH), this paper analyzed guidelines and main factors of one-handed tasks. The previous studies concerned main factors of distance, weight, frequency, posture, gender, age, training, direction of force, height of the force exerted, and object shape and size. Based on these factors, the criteria used to understand one-handed tasks were objective measures of maximum strength, reaction force, etc., psychophysical measures of maximum acceptable frequency and weight, etc., and physiological measures of oxygen uptake, heart rate, electromyography, etc. An allowance threshold model regarding quantitative and objective fatigue and workload would be suggested for future research. This study would be expected that it serve to establish and Korean recommendations of one-handed tasks.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.79-90
• /
• 1995

The material handling equipment selection, that is a key task in the material handling system design, is a complex, difficult task, and requires a massive technical knowledge and systematic analysis. It is invaluable to justify the selected equipment model by the performance evaluation before its actual implementation. This paper presents an intelligent knowledge-based expert system called "IMESE" created by authors, for the selection and evaluation of material handling equipment model suitable for movement and storage of materials in a manufacturing facility. The IMESE is consisted of four modules: a knowledge base to select an appropriate equipment type, a multiple criteria decision making procedure to choose the most favorable commercial model of the selected equipment type, a database to store the list of commercial models of equipment types with their specifications, and simulators to evaluate the performance of the equipment model. The whole process of IMESE is executed under VP-Expert expert system environment.vironment.

• 설비공학논문집
• /
• 제19권9호
• /
• pp.622-629
• /
• 2007

Compact semi-center type automotive air handling system(AHS) is developed in this study and it's performance is compared with the conventional 3-pieces type air hand-ling system. The pressure drop is measured at component level and system level, and air flow rate and air distribution of discharge air through each ducts from air handling system are measured. System level characteristics of pressure drop at face and windshield discharge mode and air flow rate are investigated, and also temperature control linearities are tested. The volume of the air handling system package is reduced about 20%. And air flow rate increase about 5 to 20% compared to the conventional 3-pieces type air handling system at each discharge mode with significantly improved air pressure drop both component and system level. Also, air distribution and temperature controllability meet to evaluation criteria.

• 한국항행학회논문지
• /
• 제9권2호
• /
• pp.185-192
• /
• 2005

본 논문은 스마트 개발 사업의 일환으로 틸트로타 항공기(TR-S4) 비선형 시뮬레이션 모델의 비행성 분석을 수행하였다. TR-S4는 이착륙을 위한 헬리콥터 모드와 천이모드, 고정익 모드로 구분할 수 있다. 본 논문에서는 헬리콥터 모드만 고려하며, 이 모드는 호버링 모드와 전진비행 모드로 구분한다. 비행성 분석은 안정성과 조종성에 영향을 주는 조종입력에 대한 항공기 응답으로 구성된다. 조종사가 정확한 출발기동과 멈춤기동을 할 수 있게 하는 비교적 변위가 작은 운동과 연관되는 단주기 응답특성 파리미터인 bandwidth를 이용하여 비행성을 분석하였다. 안정성 증강장치(SAS)와 자세 제어기를 장착한 6자유도 비선형 시뮬레이션 모델을 이용한 TR-S4 헬리콥터 모드의 비행성은 대부분 ADS-3 규격서의 level 1을 만족하였다.

• 항공우주기술
• /
• 제2권2호
• /
• pp.105-114
• /
• 2003

본 논문에서는 KSR-III 1단부의 도로운송과 핸들링시에 예상되는 진동하중의 분석을 다룬다. 일반적으로 기체가 이송 중에 겪는 진동하중은 실제 기체가 비행 중에 겪는 진동 환경과는 많은 차이가 있다. 이송시 겪는 진동하중 특성에 대한 부적절한 해석은 이송 중에 로켓시스템에 직접적인 손상을 야기할 수 있을 뿐만 아니라, 비행임무 실패로 이어질 수도 있다. 그러므로, 기체 설계단계에서부터 이송시 진동하중을 함께 고려하여야 하며, 이송에 대한 적절한 방법을 강구해야 한다. 본 연구에서는, KSR-III의 도로운송이나 핸들링시의 진동하중을 예측하여 그 규격을 설정하는 과정을 기술하며, 저진동 이송치구의 동특성 분석과 사전도로테스트를 통하여 이송치구와 이송과정의 타당성을 검증하고, KSR-III 단인증 모델(1단)의 이송결과를 정리하고 분석한다. KSR-III 운송과정중의 최대허용 진동하중은 2g이며, 실제 운송결과 이보다 작은 값이 기록되었다.