• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.10
• /
• pp.91-101
• /
• 1997

In this paper, the complexity of the product is evaluated quantitatively regarding to access of assembly tools and handling of part. To evaluate the complexity of the product, we grasped factors that could influence on the complexity of the product with access and handling, and then we determined the criteria of comparison for each complexity factor. The criteria compare the complexities of product alternatives on each access and handling.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.250-254
• /
• 2002

It is conducted to analyze vibration loads on KSR-III(KSR: Korea Sounding Rocket) and its major segments during their ground transportation and various handling process. These loads may be different from the real flight environment. Inadequate assessment of these loads can cause not only local damages on the rocket system but also the critical problem like flight mission failure. Therefore, transportation and handling loads must be considered during design and attenuated to ensure that the rocket structural damage does not occur. This work is concerned with the generation of criteria and prediction of transportation and handling loads for KSR-III. The results show that the shipping container is well designed to satisfy the design requirements. The maximum vibration level recorded during whole transportation and handling for KSR-III is less than 2g, the criteria of KSR-III movement condition.

• Korean Journal of Hazardous Materials
• /
• v.6 no.2
• /
• pp.1-6
• /
• 2018

The use of chemicals to enhance and improve life is a widespread practice worldwide. But alongside the benefits of these products, there is also the potential for adverse effects to people or the environment. Thus, If anyone handles hazardous chemicals, they should adhere to specific criteria for hazardous chemicals. This study used hazard statement(H-code) and precautionary statement(P-code) to set specific criteria for handling chemicals. According to the UN GHS, hazard statement means a statement assigned to a hazard class and category that describes. And a precautionary statement is a phrase which describes recommended measures that should be taken to minimize or prevent adverse effects resulting from exposures to a hazardous product, or improper storage or handling of a hazardous product. The study suggests the treatment criteria(Public Notice) of 785 types of hazardous chemicals managed by the Chemical Control Act.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.5
• /
• pp.603-614
• /
• 2004

The purpose of this study was to investigate the criteria of evaluating clothing and web service on internet shopping malls related to consumers' shopping behavior, This study surveyed consumers who have an experience of buying products on the internet shopping mall and the questionnaire and judgment sampling was used. The subjects were 305 men and women living in the metropolitan area. Method of data analysis were factor analysis, t-test, ANOVA, Duncan test and descriptive statistics. The results were as follows: the items buy from the internet were t-shirts, blouses, knits, skirts and pants. The reasons for buying clothing on the internet were good prices, time saving, door-to-door delivery, while the reasons for not buying on the internet were worries about differences between the product shown on the screen and the actual one, quality guarantee, delivery accident and inconvenience in exchange and refund. Among the differences of clothing evaluation criteria according to internet shopping behavior, significant differences were found in the esthetic criteria and the quality performance criteria according to internet using hours, and in the esthetic criteria according to buying experiences. Among the differences of web service evaluation criteria according to internet shopping behavior, the differences among the groups were found in the reliance criteria, the product reference criteria, the order processing criteria and the handling after purchase criteria according to internet using hours. The significant differences were found in the handling after purchase criteria and the promotion$.$policy criteria according to buying experience, and in the promotion$.$policy criteria according to times of purchase.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.3
• /
• pp.1-7
• /
• 2010

The aim of this research is to evaluate movement and path characteristics of developed heavy duty handling robot using laser tracker(API T3) according to the ISO 9283 robot performance evaluation criteria. As carry out 3D modeling and simulation using CATIA, a test cube was set up to select moving and measuring range of robot. Performance test for pose and distance accuracy, path and path velocity accuracy under payload zero and 440kgf was accomplished. The resulted output data show the reliability of the developed robot.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.5
• /
• pp.819-829
• /
• 2010

By referring thirty-seven previous studies on manual material handling (MMH), this paper analyzed guidelines and main factors of one-handed tasks. The previous studies concerned main factors of distance, weight, frequency, posture, gender, age, training, direction of force, height of the force exerted, and object shape and size. Based on these factors, the criteria used to understand one-handed tasks were objective measures of maximum strength, reaction force, etc., psychophysical measures of maximum acceptable frequency and weight, etc., and physiological measures of oxygen uptake, heart rate, electromyography, etc. An allowance threshold model regarding quantitative and objective fatigue and workload would be suggested for future research. This study would be expected that it serve to establish and Korean recommendations of one-handed tasks.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.79-90
• /
• 1995

The material handling equipment selection, that is a key task in the material handling system design, is a complex, difficult task, and requires a massive technical knowledge and systematic analysis. It is invaluable to justify the selected equipment model by the performance evaluation before its actual implementation. This paper presents an intelligent knowledge-based expert system called "IMESE" created by authors, for the selection and evaluation of material handling equipment model suitable for movement and storage of materials in a manufacturing facility. The IMESE is consisted of four modules: a knowledge base to select an appropriate equipment type, a multiple criteria decision making procedure to choose the most favorable commercial model of the selected equipment type, a database to store the list of commercial models of equipment types with their specifications, and simulators to evaluate the performance of the equipment model. The whole process of IMESE is executed under VP-Expert expert system environment.vironment.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.9
• /
• pp.622-629
• /
• 2007

Compact semi-center type automotive air handling system(AHS) is developed in this study and it's performance is compared with the conventional 3-pieces type air hand-ling system. The pressure drop is measured at component level and system level, and air flow rate and air distribution of discharge air through each ducts from air handling system are measured. System level characteristics of pressure drop at face and windshield discharge mode and air flow rate are investigated, and also temperature control linearities are tested. The volume of the air handling system package is reduced about 20%. And air flow rate increase about 5 to 20% compared to the conventional 3-pieces type air handling system at each discharge mode with significantly improved air pressure drop both component and system level. Also, air distribution and temperature controllability meet to evaluation criteria.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.185-192
• /
• 2005

The aim of this paper is to analyze handling qualities of tiltrotor aircraft(TR-S4) in helicopter flight mode including hovering and forward flight. Analysis of handling qualities is composed of aircraft response to control inputs that effect on stability and controllability. In short term response analysis, bandwidth is the critical parameter for small amplitude motions since it relates to the ability of a pilot to crisply start and stop maneuver. The handling qualities of TR-S4 in helicopter mode are analyzed with a SAS and an attitude controller and are satisfied level 1 in almost criteria with simulation of TR-S4 6-DOF nonlinear model.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.105-114
• /
• 2003

It is conducted to analyze vibration loads on the 1st stage of KSR-III(KSR : Korea Sounding Rocket) during their ground transportation and various handling process. These loads may be different from the real flight environment. Inadequate assessment of these loads can cause not only local damages on the rocket system but also the critical problem like flight mission failure. Therefore, transportation and handling loads must be considered during design and attenuated to ensure that the rocket structural damage does not occur. This work is concerned with the generation of criteria and prediction of transportation and handling loads for KSR-III. The results show that the shipping container is well designed to satisfy the design requirements. The maximum vibration level recorded during whole transportation and handling for KSR-III is less than 2g, the criteria of KSR-III movement condition.