• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.210-217
• /
• 2023

Various performances of ultra-high performance concrete (UHPC) applied with microplastics and expanded polystyrene (EPS) beads were evaluated. CompressIve and flexural strength, performance after ignition, flow-down in fresh state, and effective bond strength were evaluated. Designed weight of the cement panel with these mixtures was calculated based on the flexural strength. As a result of the experiments, it was confirmed that the EPS could reduce the density of UHPC with largest range. By maximum addition of EPS beeds, the density of UHPC decreased to 1300 kg/m³, and the compressive and flexural strengths for this mixtures were in ranges of 20-30 MPa and 15-20 MPa, respectively. On the other hand, lightest cement panel could be designed with UHPC having a density ranges about 2.0 g/cm³.

• International Journal of Computer Science & Network Security
• /
• v.24 no.3
• /
• pp.182-188
• /
• 2024

Hardware components are an integral part of Hardware Define Radio (HDR) for seamless operations and optimal performance. On the other hand, Software Define Radio (SDR) is a program that does not rely on any hardware components for its performance. Both of the latter radio programmers utilize modulation functions to make their core components from signal processing viewpoint. The following paper concentrates on SDR based modulation and their performance under different modulations. The bit error rate (BER) of modulations such as PSK, QAM, and PSAM were used as indicators to test channel quality estimation in planar Rayleigh fading. Though it is not commonly used for channel fading, the method of the adder determines the regionally segmented channel fading. Thus, the estimation error of the channel change substantially reduces the performance of the signal, hence, proving to be an effective option. Moreover, this paper also elaborates that BER is calculated as a function of the sample size (signal length) with an average of 20 decibels. Consequently, the size of the results for different modulation schemes has been explored. The analytical results through derivations have been verified through computer simulation. The results focused on parameters of amplitude estimation error for 1dB reduction in the average signal-to-noise ratio, while the combined amplitude deviation estimation error results are obtained for a 3.5 dB reduction

• Atmosphere
• /
• v.34 no.3
• /
• pp.273-281
• /
• 2024

Analyzing the information about climate change on Korean Peninsula is essential for the national defense. In this study, we used HadGEM3-RA model output (a member of CORDEX-EA) and analyzed the 3 operational weather factors (VMC, runway temperature, WBGT), which affect the aircraft field. The number of future limited days was quantitatively calculated based on the model outputs applying SSP1-2.6 and SSP5-8.5 and the operational limits of the previous three factors, and the spatial distribution, time series, and correlation of each result were analyzed. In conclusion, it was analyzed that the number of limited days by VMC would decrease, resulting from the rise in temperature and the drop in relative humidity. This means the operational environment in VMC will improve. On the other hand, the number of limited days by the runway temperature and WBGT would increase, resulting from the rise in temperature. This means the operational environment in runway temperature and WBGT will worsen.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.3
• /
• pp.198-205
• /
• 2014

The present paper investigates the leaching property of coal fly ash (FA) using distilled water as solvent and its performance of mineral carbonation. The highest leaching efficiency is obtained at 100 min after leaching begins and the overall leaching efficiencies of Ca and Na via five consecutive leachings were calculated to be 25.37% and 7.40%, respectively. In addition, because $Ca(OH)_2$ produced during the leaching reacts with $SiO_2$ which is the major component of FA, the Pozzolanic reaction may occur and thus reduces leaching efficiency. Total carbonation capacity of FA by absorbing $CO_2$ into FA leachates is 6.08 mg $CO_2/g$ FA and the contribution of alkali substances such as Ca, Na, Mg and K to this value is calculated to be 5.19 mg $CO_2/g$ FA. Carbonation efficiencies of Ca and Na based on leachates are 85.62% and 77.70%, respectively. On the other hand, the ratios of Ca and Na in raw FA to participate in carbonation are calculated to be 9.04% and 5.26%, respectively.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.2
• /
• pp.89-96
• /
• 2006

Purpose: To study effectiveness of heterogeneity correction of internal-body inhomogeneities and patient positioning immobilizers in dose calculation, using images obtained from CT-Simulator. Materials and Methods: A water phantom($250{\times}250{\times}250mm^3$) was fabricated and, to simulate various inhomogeneity, 1) bone 2) metal 3) contrast media 4) immobilization devices(Head holder/pillow/Vac-lok) were inserted in it. And then, CT scans were peformed. The CT-images were input to Radiation Treatment Planning System(RTPS) and the MUs, to give 100 cGy at 10 cm depth with isocentric standard setup(Field Size=$10{\times}10cm^2$, SAD=100 cm), were calculated for various energies(4, 6, 10 MV X-ray). The calculated MUs based on various CT-images of inhomogeneities were compared and analyzed. Results: Heterogeneity correction factors were compared for different materials. The correction factors were $2.7{\sim}5.3%$ for bone, $2.7{\sim}3.8%$ for metal materials, $0.9{\sim}2.3%$ for contrast media, $0.9{\sim}2.3%$ for Head-holder, $3.5{\sim}6.9%$ for Head holder+pillow, and $0.9{\sim}1.5%$ for Vac-lok. Conclusion: It is revealed that the heterogeneity correction factor calculated from internal-body inhomogeneities have various values and have no consistency. and with increasing number of beam ports, the differences can be reduced to under 1%, so, it can be disregarded. On the other hand, heterogeneity correction from immobilizers must be regarded enough to minimize inaccuracy of dose calculation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.342-347
• /
• 2016

This paper dealt with the economic analysis on the application of shipboard LED (Light Emitting Diode) luminaires to replace incandescent and fluorescent lamps, which account for over 80 % of light source on a training or naval vessel. The rates of savings achieved in the power consumption, initial investment, maintenance cost, and fuel cost were analyzed. The break-even points and the $CO_2$ emissions were also calculated. For the training vessel, the initial investment was increased by 3.8 times, while the maintenance cost over five years was reduced by 51 %. When 40 %, 50 %, and 60 % of luminaires were turned on, the calculated break-even points were 11 months, 9 months, and 7 months, respectively. On the other hand, the initial investment was increased by 3.5 times while the maintenance cost over five years was saved by 55 % for the naval vessel. The break-even points were calculated as 15 months, 12 months, and 10 months, respectively. Moreover, the $CO_2$ emissions of the training and the naval vessels were reduced by 69 % and 65 %, respectively. From the results, it was revealed that the maintenance cost can be reduced by more than 50 %, and that the power consumption, fuel cost, and $CO_2$ emissions can be reduced by more than 60 % if LED luminaires are used on two types of vessels.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.4
• /
• pp.398-402
• /
• 1989

Moisture sorption and cooking properties of two varieties of Korean soybean(Jangyup and Whangkeum) were studied. When soybean was stored under the various relative humidities (RH) of 33-86% at 16'E for 125hours, its sorption behaviors were divided into two : desorption at the RHs of 33 and 44% and adsorption at the RHs of above 55%. The sorption rate was decreased rapidly during storage. In comparisons with only storage humidities, the sample stored at higher RH held the higher sorption rate. The relationships between storage time and sorption rate were applied well to the equation, log dw/dt= b log t+ log a, where w is the moisture content(%, db), t is time(hour) and a and b are the parameters which were calculated from the experimental data. The calculated moisture contents from the equation agreed well with the measured moisture contents. On the other hand, the cooking degrees of soybean which was steamed in an autoclave at $106-121^{\circ}C$ were compared by the maximum cutting forces. The cooking time to attain the same degree of cooking decreased logarithmically as the cooking temperature increased. The z-values which were calculated from the time-temperature combinations that gave the same degree of cooking for Jangyup and Whangkeum were $13.3^{\circ}C$ and $12.8^{\circ}C$ respectively.

• Horticultural Science & Technology
• /
• v.29 no.3
• /
• pp.181-186
• /
• 2011

To predict the bud bursting date of 'Campbell Early' grapevines, the bud developmental rate (DVR) models were constructed. The DVRs for bud bursting were calculated from the demanded times at controlled air temperatures. The DVRs were examined on the 'Campbell Early' grapevines incubated in three different temperatures at 4.6, 11.8, and $16.6^{\circ}C$. The DVR increased exponentially or linearly on the air temperature with a slope of about 0.0019. The DVR equations were computed as $DVR=0.0249+0.0020e^{0.1654x}$ or DVR = 0.0019x + 0.0187. These DVR equations offered developmental indices and predicted dates for bud bursting with air temperature data. The DVR equations were validated to the bud bursting data observed in the field. When bud bursting dates were calculated with daily temperature data, the root mean squared error (RMSE) between the observed and the predicted dates was less than 4 days. When those were calculated with hourly temperature data, on the other hand, the RMSE was less than 3 days. These results suggest that the DVR models are useful to predict bud bursting date of 'Campbell Early' grapevines.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1425-1434
• /
• 2021

Continuous and periodic data acquisition must be preceded to maintain and manage the river facilities effectively. Adapting the existing general facilities methods, which include river surveying methods such as terrestrial laser scanners, total stations, and Global Navigation Satellite System (GNSS), has limitation in terms of its costs, manpower, and times to acquire spatial information since the river facilities are distributed across the wide and long area. On the other hand, the Mobile Mapping System (MMS) has comparative advantage in acquiring the data of river facilities since it constructs three-dimensional spatial information while moving. By using the MMS, 184,646,009 points could be attained for Anyang stream with a length of 4 kilometers only in 20 minutes. Levee points were divided at intervals of 10 meters so that about 378 levee cross sections were generated. In addition, the waterside maximum and average slope could be automatically calculated by separating slope plane form levee point cloud, and the accuracy of RMSE was confirmed by comparing with manually calculated slope. The reference slope was calculated manually by plotting point cloud of levee slope plane and selecting two points that use location information when calculating the slope. Also, as a result of comparing the water side slope with slope standard in basic river plan for Anyang stream, it is confirmed that inspecting the river facilities with the MMS point cloud is highly recommended than the existing river survey.

• Journal of Radiation Protection and Research
• /
• v.9 no.2
• /
• pp.76-89
• /
• 1984

Weighted committed dose equivalents($W_T\;H_{50}$) per intake of unit activity of four nuclides-I-131, I-133, Cs-134 and Cs-137-, which was based on the concepts of ICRP Pub. 30, are calculated for adult who is 70 kg and 25 years old and, for infant who is 10 kg and 1 year old. Metabolism of iodine taken through oral or inhalation pathway is described by using the three-compartment model which consists of inorganic, thyroid and organic compartment. After intake, the amount of iodine in every compartment is calculated by solving the transfer equations among the these compartments. As soon as caesium is taken into the body, it is distributed uniformly in the body through the transfer compartment. In this case, the amount of caesium in total body is calculated by using the total body compartment model which is divided into two tissue compartments because of their different biological half-lifes of caesium in body. As a result of calculations, whether oral or inhalation pathway, the values of ($W_T\;H_{50}$) per intake of unit activity of I-131 for infants are about ten times as much as those of adults. On the other hand, for Cs-134 and Cs-137, the values of $W_T\;H_{50}$ per intake of unit activity show that, whether adults of infants, they have almost the same values.