• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.5
• /
• pp.427-436
• /
• 2010

The printer sound has many aspects which define its quality because the printer has lots of components and its operation is very complicated. These sound qualities are related to the international competition in printer markets. Recordings inside anechoic chamber were analyzed and a large number of sounds were stimulated using digital signal processing technique. First subjective tests of the printer sound were conducted using semantic different method. By applying factor analysis to the subjective response, two important factors of sound quality were extracted. Second subjective tests were conducted to evaluate the quietness and the impulsiveness of the printer sounds. On the other hand, sound metrics are calculated applying psychoacoustic theories. In this paper, the nonlinear relation between subjective evaluation and sound metrics was identified using artificial neural network and the printer sound quality index was developed. Later, subjective sound quality evaluation will be estimated and evaluated using this index.

• Korean Journal of Materials Research
• /
• v.26 no.6
• /
• pp.325-331
• /
• 2016

This paper presents a study of the tensile properties of austenitic high-manganese steel specimens with different grain sizes. Although the stacking fault energy, calculated using a modified thermodynamic model, slightly decreased with increasing grain size, it was found to vary in a range of $23.4mJ/m^2$ to $27.1mJ/m^2$. Room-temperature tensile test results indicated that the yield and tensile strengths increased; the ductility also improved as the grain size decreased. The increase in the yield and tensile strengths was primarily attributed to the occurrence of mechanical twinning, as well as to the grain refinement effect. On the other hand, the improvement of the ductility is because the formation of deformation-induced martensite is suppressed in the high-manganese steel specimen with small grain size during tensile testing. The deformation-induced martensite transformation resulting from the increased grain size can be explained by the decrease in stacking fault energy or in shear stress required to generate deformation-induced martensite transformation.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.2
• /
• pp.413-419
• /
• 2012

Objective: This study presents an observation and analysis on behavioral characteristics of old users in comparison to young users in the use of control on display interface. Background: Touch interface which allows users to control directly on display, is conceived as delight and easy way of human-computer interaction. Due to the advantage in stimulus-response ensemble, the old users, who typically experiencing difficulties in interacting with computer, would expected to have better experience in using computing machines. Method: Twenty nine participants who are over 50 years old and 14 participants who are in 20s years old were participated in this study. Three primary tasks in touch interface, which are tap, move, and flick, were delivered by the users. For the tap task, response time and point of touch response were collected and the response bias was calculated for each trial. For the move task, delivery time and the distance of finger movements were recorded for each trial. For the flick task, task completion time and flicking distance were recorded. Results: From the collected behavioral data, temporal and spatial differences between young and old users behavior were analyzed. The older users showed difficulty in completing move task requiring eye-hand coordination.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.9
• /
• pp.2717-2722
• /
• 2014

The reaction mechanism between azacyclopropenylidene and epoxypropane has been systematically investigated employing the second-order M${\o}$ller-Plesset perturbation theory (MP2) method to better understand the reactivity of azacyclopropenylidene with four-membered ring compound epoxypropane. Geometry optimization, vibrational analysis, and energy property for the involved stationary points on the potential energy surface have been calculated. It was found that for the first step of this reaction, azacyclopropenylidene can insert into epoxypropane at its C-O or C-C bond to form spiro intermediate IM. It is easier for the azacyclopropenylidene to insert into the C-O bond than the C-C bond. Through the ring-opened step at the C-C bond of azacyclopropenylidene fragment, IM can transfer to product P1, which is named as pathway (1). On the other hand, through the H-transferred step and subsequent ring-opened step at the C-N bond of azacyclopropenylidene fragment, IM can convert to product P2, which is named as pathway (2). From the thermodynamics viewpoint, the P2 characterized by an allene is the dominating product. From the kinetic viewpoint, the pathway (1) of formation to P1 is primary.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2167-2170
• /
• 2013

A low-cost and simple recycling process of waste thermoelectric modules has been investigated using chemical reduction methods. The recycling is separated by two processes, such as dissolving and reduction. When the waste thermoelectric chips are immersed into a high concentration of $HNO_3$ aqueous solution at $100^{\circ}C$, oxide powders, e.g., $TeO_2$ and $Sb_2O_3$, are precipitated in the $Bi^{3+}$ and $HTeO{_2}^+$ ions contained solution. By employing a reduction process with the ions contained solutions, $Bi_2Te_3$ nanoparticles are successfully synthesized. Due to high reduction potential of $HTeO{_2}^+$ to Te, Te elements are initially formed and subsequently $Bi_2Te_3$ nanoparticles are formed. The average particle size of $Bi_2Te_3$ was calculated to be 25 nm with homogeneous size distribution. On the other hand, when the precipitated powders reduced by hydrazine, $Sb_2O_3$ and Te nanoparticles are synthesized because of higher reduction potentials of $TeO_2$ to Te. After the washing step, the $Sb_2O_3$ are clearly removed, results in Te nanoparticles.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.100-106
• /
• 1991

Ba.Fe - hydroxide precipitates were obtained by the variation of pH levelsm, which process was based on the calculated solubility from the solubility product(Ksp). Single phase $BaFe_12O_19$ was synthesized above $790^{\circ}C$. The 98% of theoretical density was obtained in the specimens formed from the filter cake drying and the hand pressing at temperatures $95^{\circ}C$ and $1,100^{\circ}C$ for 2hrs, respectively. The feezing of colloidal coprecipitate suspension formed powders up to several tens of micron size, which led to reduce the filtration time and the consumption of distilled water.

• Phonetics and Speech Sciences
• /
• v.10 no.1
• /
• pp.9-14
• /
• 2018

This study compared the relative contributions of intensity, F0, duration and vowel spectra of L2 English lexical stress by Japanese and Korean learners of English. Recordings of Japanese, Korean and native English speakers reading eighteen 2 to 4 syllable words in a carrier sentence were analyzed using multiple regression to investigate the influence of each acoustic correlate in determining whether a vowel was stressed. The relative contribution of each correlate was calculated by converting the coefficients to percentages. The Japanese learner group showed phonological transfer of L1 phonology to L2 lexical prosody and relied mostly on F0 and duration in manifesting L2 English stress. This is consistent with the results of the previous studies. However, advanced Japanese speakers in the group showed less reliance on F0, and more use of intensity, which is another parameter used in native English stress accents. On the other hand, there was little influence of F0 on L2 English stress by the Korean learners, probably due to the transfer of the Korean intonation pattern to L2 English prosody. Hence, this study shows that L1 transfer happens at the prosodic level for Japanese learners of English and at the intonational level for Korean learners.

• Geomechanics and Engineering
• /
• v.8 no.4
• /
• pp.511-521
• /
• 2015

It is a common failure type that high-filled embankment slope sideslips. The deformation mechanism and factors influencing the sideslip of embankment slope is the key to reduce the probability of this kind of engineering disaster. Taking Liujiawan high-filled embankment slope as an example, the deformation and failure characteristics of embankment slope and sheet-pile wall are studied, and the factors influencing instability are analyzed, then the correlation of deformation rate of the anti-slide plies and each factor is calculated with multivariate linear regression analysis. The result shows that: (1) The length of anchoring segment is not long enough, and displacement direction of embankment and retaining structure are perpendicular to the trend of the highway; (2) The length of the cantilever segment is so large that the active earth pressures behind the piles are very large. Additionally, the surface drainage is not smooth, which leads to form a potential sliding zone between bottom of the backfill and the primary surface; (3) The thickness of the backfill and the length of the anti-slide pile cantilever segment have positive correlation with the deformation whereas the thickness of anti-slide pile through mudstone has a negative correlation with the deformation. On the other hand the surface water is a little disadvantage on the embankment stability.

• Journal of The Korean Astronomical Society
• /
• v.37 no.5
• /
• pp.405-412
• /
• 2004

Cosmological shocks form as an inevitable consequence of gravitational collapse during the large scale structure formation and cosmic-rays (CRs) are known to be accelerated at collisionless shocks via diffusive shock acceleration (DSA). We have calculated the evolution of CR modified shocks for a wide range of shock Mach numbers and shock speeds through numerical simulations of DSA in 1D quasi-parallel plane shocks. The simulations include thermal leakage injection of seed CRs, as well as pre-existing, upstream CR populations. Bohm-like diffusion is assumed. We show that CR modified shocks evolve to time-asymptotic states by the time injected particles are accelerated to moderately relativistic energies (p/mc $\ge$ 1), and that two shocks with the same Mach number, but with different shock speeds, evolve qualitatively similarly when the results are presented in terms of a characteristic diffusion length and diffusion time. We find that $10^{-4} - 10^{-3}$ of the particles passed through the shock are accelerated to form the CR population, and the injection rate is higher for shocks with higher Mach number. The CR acceleration efficiency increases with shock Mach number, but it asymptotes to ${\~}50\%$ in high Mach number shocks, regardless of the injection rate and upstream CR pressure. On the other hand, in moderate strength shocks ($M_s {\le} 5$), the pre-existing CRs increase the overall CR energy. We conclude that the CR acceleration at cosmological shocks is efficient enough to lead to significant nonlinear modifications to the shock structures.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.75-82
• /
• 2007

The purpose of this study was to analyze and compare the effect of gait time on the gait patterns in elderly female OA and non-OA patients. The intensity of the subjects joint pain was surveyed by using WOMAC. Twelve subjects participated in this study. Measurements were taken for every the 10 minutes for 30 minutes after walking by a force plate. The following variables were recorded; double stance support time, Fx, Fy, Fx_time, Fz and so on. From the investigation of these variables the following was observed and concluded. The Fz values for the OA group was 1.01BW at the start and after 30 minutes was 1.04BW on the other hand the non-OA group's Fz1 was 1.08BW and 1.10BW. There was no significant difference calculated between the two groups and at the start and end of the experiment about all the variables. Therefore, it is concluded that there was no negative effect caused by walking for the 30 minutes and that it was an effective way of strengthen both respiratory and muscle function.