• Journal of Korean Academy of Oral Health
• /
• v.41 no.4
• /
• pp.262-266
• /
• 2017

Objectives: The aim of this study was to compare Plaque Percent Index (PPI), calculated by Patient Hygiene Performance Index (PHPI), Rustogi's modification of the Navy Plaque Index (RMNPI), and the Quigley & Hein Plaque Index (QHPI), with visual assessment. Methods: Ninety-six subjects, aged between 30-65 years, were examined; twenty subjects were included in the final analysis. The subjects' teeth were stained and photographed. Dental coloring and intraoral camera photography were performed by a single examiner. The oral images obtained were analyzed using Image J to measure the area of dental plaque. The values of PHPI, RMNPI, and QHPI were calculated twice. Statistical analyses were performed using descriptive statistics, chi-square test, and Pearson's correlation coefficient. Results: The results of the correlation analyses of PPI with PHPI, QHPI, and RMNPI were as follows: for PHPI, the correlation coefficient (r)=0.584; for QHPI, r=0.689; and for RMNPI, r=0.729. Further, the kappa indices of PHPI, QHPI, and RMNPI were 0.810, 0.677, and 0.590 respectively. Conclusions: Among RMNPI, QHPI, and PHPI dental plaque indices, RMNPI and QHPI showed a high degree of correlation with the actual stained dental plaque area; on the other hand, PHPI showed the highest kappa index.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.3051-3057
• /
• 2021

The concrete is considered as an important radiation shielding material employed widely in nuclear reactors, particle accelerators, laboratory hot cells and other different radiation sources. The present research is dedicated to the shielding properties study of the ordinary concrete reinforced with different weight fractions of lead oxide micro/nano particles. Lead oxide particles were fabricated by chemical synthesis method and their properties including the average size, morphological structure, functional groups and thermal properties were characterized by XRD, FESEM-EDS, FTIR and TGA analysis. The gamma ray mass attenuation coefficient of concrete composites has been calculated and measured by means of the Monte Carlo simulation and experimental methods. The simulation process was based on the use of MCNP Monte Carlo code where the mass attenuation coefficient (μ/ρ) has been calculated as a function of different particle sizes and filler weight fractions. The simulation results showed that the employment of the lead oxide filler particles enhances the mass attenuation coefficient of the ordinary concrete, drastically. On the other hand, there are approximately no differences between micro and nano sized particles. The mass attenuation coefficient was increased by increasing the weight fraction of nanoparticles. However, a semi-saturation effect was observed at concentrations more than 10 wt%. The experimental process was based on the fabrication of concrete slabs filled by different weight fractions of nano lead oxide particles. The mass attenuation coefficients of these slabs were determined at different gamma ray energies using ²²Na, ¹³⁷Cs and ⁶⁰Co sources and NaI (Tl) scintillation detector. The experimental results showed that the HVL parameter of the ordinary concrete reinforced with 5 wt% of nano PbO particles was reduced by 64% at 511 keV and 48% at 1332 keV. Reasonable agreement was obtained between simulation and experimental results and showed that the employment of nano PbO particles is more efficient at low gamma energies up to 1Mev. The proposed concrete is less toxic and could be prepared in block form instead of toxic lead blocks.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.3
• /
• pp.348-355
• /
• 2021

Hantaan virus(HTNV) causes hemorrhagic fever with renal syndrome(HFRS) with a case fatality rate ranging from <1 to 15 % in human. Hantavax^Ⓡ is a vaccine against the Hantavirus, which has been conditionally approved by the Ministry of Food and Drug Safety(MFDS). However, only 50 % of volunteers had neutralizing antibodies 1 year following the boost. Effective antiviral treatments against HTNV infection are limited. Hantaviruses generally cause asymptomatic infection in adult mice. On the other hand, infection of suckling and newborn mice with hantaviruses causes lethal neurological diesease or persistant infection, which is different from the disease in humans. The development of vaccines and antiviral strategies for HTNV has been partly hampered by the lack of an efficient lethal mouse model to evaluate the efficacy of the candidate vaccines or antivirals. In this report, we established a lethal mouse model for HTNV, which may facilitate in vivo studies on the evaluation of candidate drugs against HTNV. The median lethal dose value of HTNV was calculated by probit analysis of deaths occurring within two weeks. Five groups of ten ICR mice were injected intracranially with serial 2-fold dilutions (from 50 to 3.125 PFU/head) of HTNV. Mice injected with HTNV began to die at 8 days post-infection. The lethal dose required to kill 50 % of the mice (LD₅₀) was calculated to be 2.365 PFU/head.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.116-130
• /
• 2023

Expressways play pivotal roles in cargo transportation because of their superior accessibility and mobility compared to rail and air. On the other hand, there is a limit to the accurate calculation of cargo transportation performance using existing highways owing to the mixture of vehicle types and difficulty in identifying cargo loads of individual cargo vehicles. This paper presents an algorithm for calculating more reliable cargo transportation performance using big data. The traffic performance (veh·km/day) was derived using the data collected from Toll Collecting System. The average tolerance weight for each vehicle type and the cargo load unit (ton/unit) considering it was calculated using vehicle specification information data and high-speed and low-speed axis data. This study calculated the cargo transportation performance by section and type using various online integrated highway data and presented a method for calculating the transportation performance by linking open business offices and private highways.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.168-175
• /
• 2011

Construction accidents are major problem in Turkish Construction industry and especially fatally rates are very high. Current legislative system on occupational safety in Turkey enforces employers to implement safety measures as well as safety management systems. However level of consciousness in the industry is unsatisfactory and safety are perceived as extra cost and unnecessary expenditure. Moreover, especially in small residential building constructions which have a big share in the industry and unfortunately safety measures to mitigate or abate construction risks do not exist. The study focuses on small residential building construction sites and in the scope of this study, thirty building projects are examined. For each building project, project cost including labour and material costs, service and consultancy costs for mechanical, electrical systems as well as architectural and structural services, costs for supervision and finally general expenditures for construction site facilities were calculated. On the other hand, occupational safety costs for personal protective equipment, collective protective measures, consultancy and training were determined. Work breakdown structures were established and for each work item firstly occupational risks were evaluated and furthermore according to risk scores safety measures to be implemented were defined and related costs were calculated. The study gave results for total safety cost on average, in terms of percentage of total project cost (3.73% of total project cost), safety cost per man-hour (0.40 USD) and safety cost in terms of unit construction area (11.60 USD per square meter). Since safety management is a part of whole project management process, study gives suggestions and techniques to calculate safety costs and implement safety measures as a part of project management service for professionals. Authors believe that suggested approach may easily developed by the usage of more data to establish a model for estimation not only for building construction sites but also for all construction projects.

• Journal of Nutrition and Health
• /
• v.11 no.4
• /
• pp.31-38
• /
• 1978

Younghung-myun is located on a small island under the jurisdiction of Gyunggi province. The island occupying a total of approximately 40sq km is populated by 5,850 people. Two areas within the island were selected for this survey; 1) Nae 4-ri in Younghung-myun (mainly engaged in farming) 2) Nae 5-ri in Younghung-myun (mainly engaged in fishery) The survey was conducted for the period of 5-12 august 1978. Intake of foods and nutrients of all members in the households surveyed by means of questionnaire was computed based on number of meals a day. On the other hand, daily intake of nutrients by an individual was calculated by sex, age and type of work based on the conversion rate of RDA (Korean Recommended Dietary Allowances for Adult). The results obtained are summarized; 1. Status of food intake Average daily food intake of an individual in the surveyed areas was 1,018gm. Out of 1,018gm above, 490gm which represent 48% of the total intake were from cereals, grains or other vegetative products. Ratio of animal-origin foods was determined as only 16% of the total intake. These findings led us to the conclusion that people in the surveyed areas live heavily on vegetative foods. 2. Status of nutrients intake 1) Overall average intake of calorie by an individual in the surveyed areas was 2026.3Kcal per day. On the other hand, average calorie intake by adult persons was 2,491.3 Kcal per day, which is lower than 2,700 Kcal recommended by RDA by approximately 7.7%. Furthermore, it was observed that most of 2,491.3 Kcal obtained by adult persons was from such vegetative foods as cereals, grains, ect. 2) Overall average intake of protein by an individual in the areas surveyed was 52.2gm per dar. On the other hand, average protein intake among adult persons was 67.7gm a day, which indicates lower intake of protein than 80gm of RDA. It was also found that 84.3% of the protein intake by an adult person was of plant origin. 3) Overall average of fat intake by an individual in the areas surveyed was 18.9gm per day, whereas average fat intake among adult persons was 23. 2gm a day. It was brought to our attention that the average fat intake by adult persons is much lower than 36gm recom mended by RDA. 4) Average calcium intake among adult persons in the areas surveyed was 457.1mg per day, that is somewhat lower than 500mg in RDA. However, average iron intake among adult persons in the areas was slightly higher with 10.5mg a day than 10mg of RDA. 5) With exception with vitamin C, intake of all other vitamin groups, such as vit. A, vit. $B_1$, vit. $B_2$ and niacin, were lower among the inhabitants than recommended by RDA. 3. Economic status Average schooling years of food handlers was 6.5 years with average monthly income of \89,000 in the areas surveyed. Petroleum was used by majority of the households for fuel.

• Restorative Dentistry and Endodontics
• /
• v.24 no.3
• /
• pp.503-510
• /
• 1999

The purpose of this study was to evaluate the amount of transportation of original canal, zip formation, permanent deformation and fracture of instruments after canal enlargement. In this study, the 60 resin blocks that have curved canals were randomly divided into 3 experimental groups with 20 teeth each according to instrument types and filling methods for canal enlargement. The curved canals of each experimental groups were enlarged to No 40 ISO size with the K-flexo stainless steel file (Group 1), Engine-driven Ni-Ti Profile new series(Group 2) and Engine-driven Ni-Ti Quantec 2000 series(Group 3) according to the manufacturer's recommendation. Pre- and postoperative X-rays were taken at same position and the films were scanned and the canal images were traced to determine the canal curvature according to the method of Schneider. The amount of reduction in canal curvature were calculated between pre- and postoperative X-rays. In addition to zip formation, permanent deformation and fracture of instruments were examined after canal enlargement. The results were as follows : 1. All experimental groups showed some loss of canal curvature after instrumentation. There was a significant change in curvature between before and after instrumentation in each group(p<0.001). 2. Engine-driven Ni-Ti instrumentations resulted in an average loss of curvature of 2.36 degrees for Profile new series, 3.43 degrees for Quantec series, and hand instrumentation showed an average loss of curvature of 6.48 degrees for K-flexo file. There was a statistical significant difference between hand instrumentation and engine-driven Ni-Ti instrumentations(p<0.05). But there was no statistical difference between Profile new series and Quantec series. 3. There were many apical zip formations in group 1(Hand instrumentation). But there were no apical zip formations in group 2,3(Engine-driven Ni-Ti instrumentation). 4. The instrument deformation occured 9 cases in group 1(K-flexo file), 2 cases in group 2(Profile new series) and 3 cases in group 3(Quantec) after instrumentation. And the instrument fracture occured 1 case in each group. The results showed that the engine-driven Ni-Ti instruments, if we use carefully according to manufacturer's recommendations, can be use effectively for instrumenting the curved root canals in case of the MAF was over size 40.

• Journal of agricultural medicine and community health
• /
• v.29 no.2
• /
• pp.249-263
• /
• 2004

Objectives: The objectives of the present study were to establish the exposure monitoring method of chlorpyrifos and chlorothalonil application to pear and field red pepper by vehicle-mounted sprayer, hand-held sprayer and to assess the risk. Methods and Results: Chlorpyrifos met all of requirements of sampling and analysis method(U.S. EPA), but chlorothalonil met only dermal patch method. Potential dermal and inhalation exposure was evaluated in 42 farmers. Compared with the hand-held sprayer application, vehicle mounted sprayer demonstrated producing relatively lower dermal exposure levels with statistical significance. In dermal exposure during hand-held application, there is no significant difference between pear and red pepper. Conclusions: This results show that application method is the main factor of dermal exposure. There was no statistically significant difference between each group of respiratory exposure level. The margin of safety (MOS) was calculated to assess the risk of pesticide exposure. All Chlorpyrifos MOS values are lower than 0.2, which mean working conditions are unsafe. In order to protect farmers, big efforts to control exposure are needed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1087-1096
• /
• 2011

Vehicular Ad Hoc Network(VANET) using wireless network is offering the communications between vehicle and vehicle(V2V) or vehicle and infrastructure(V2I). VANET is being actively researched from industry field and university because of the rapid developments of the industry and vehicular automation. Information, collected from VANET, of velocity, acceleration, condition of road and environments provides various services related with safe drive to the drivers, so security over network is the inevitable factor. For the secure message authentication, a number of authentication proposals have been proposed. Among of them, a scheme, proposed by Jung, applying database search algorithm, Bloom filter, to RAISE scheme, is efficient authentication algorithm in a dense space. However, k-anonymity used for obtaining the accurate vehicular identification in the paper has a weak point. Whenever requesting the righteous identification, all hash value of messages are calculated. For this reason, as the number of car increases, a amount of hash operation increases exponentially. Moreover the paper does not provide a complete key exchange algorithm while the hand-over operation. In this paper, we use a Received Signal Strength Indicator(RSSI) based velocity and distance estimation algorithm to localize the identification and provide the secure and efficient algorithm in which the problem of hand-over algorithm is corrected.

• Annals of Occupational and Environmental Medicine
• /
• v.34
• /
• pp.23.1-23.14
• /
• 2022

Background: The musculoskeletal disease (MSD) burden is an important health problem among Korean fishers. We aimed to investigate the indicators of the prevalence of MSD and contributions of significant indicators to MSD in Korean fishers. Methods: This cross-section study included 927 fishers (male, 371; female, 556) aged 40 to 79 years who were enrolled from 3 fishery safety and health centers. The outcome variable was one-year prevalence of MSD in 5 body parts (the neck, shoulder, hand, back, and knee). Independent variables were sex, age, educational attainment, household income, job classification, employment xlink:type, hazardous working environment (cold, heat, and noise), ergonomic risk by the 5 body parts, anxiety disorder, depression, hypertension, diabetes, and hyperlipidemia. The adjusted odds ratio of MSDs by the 5 body parts were calculated using multiple logistic regression analysis. We computed the population attributable fraction (PAF) for each indicators of MSDs using binary regression models. Results: The one-year prevalence of MSD in the neck, shoulder, hand, back, and knee was 7.8%, 17.8%, 7.8%, 27.2%, and 16.2% in males vs. 16.4%, 28.1%, 23.0%, 38.7%, and 30.0% in females, respectively. The ergonomic risk PAF according to the body parts ranged from 22.8%-59.6% in males and 22.8%-50.3% in female. Mental diseases showed a significant PAF for all body parts only among female (PAF 9.1%-21.4%). Cold exposure showed a significant PAF for the neck, shoulder, and hand MSD only among female (25.6%-26.8%). Age was not a significant indicator except for the knee MSD among female. Conclusions: Ergonomic risk contributed majorly as indicators of MSDs in both sexes of fishers. Mental disease and cold exposure were indicators of MSDs only among female fishers. This information may be important for determining priority risk groups for the prevention of work-related MSD among Korean fishers.