• Journal of Families and Better Life
• /
• v.26 no.1
• /
• pp.121-135
• /
• 2008

This study examined influences of work-family conflict on husband-to-wife battering and explored the mediating effects of stress between work-family conflict and wife battering. Subjects were 293 male violence offenders sampled from 65 domestic violence counseling centers nationally. Both directions of conflict between. work and family, work-to-family interference (WIF) and family-to-work interference (FIW), were proven to be significantly influential on wife battering and stress. Work-to-family interference did not have direct influence on wife battering but indicated a complete mediation effect of stress. On the other hand, family-to-work interference implied a partial mediation effect of stress, with both direct and indirect influences on wife battering. Based on these findings, the research discussion was extended to include the implication of an intervention that would decrease husband-to-wife battering.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.5
• /
• pp.469-474
• /
• 2013

Objective: The purpose of this study was to analyze the risk factors of MSDs for the types of office work. Background: Physical risk factors of VDT(Video Display Terminal) associated with shoulder and neck musculoskeletal disorders(MSDs) include static work postures and workstation status. Method: In this study, office work was divided into data search, data entry and design work(drawings, etc.), and then we were surveyed 7 major work places which was included these works. We recorded working postures and obtained still images, depending on the types of office work. Then, RULA(Rapid Upper Limb Assessment) and ROSA(Rapid Office Strain Assessment) were used to analysis the risk factors. Results: The results of RULA showed that design work was under risk levels and required change, but ROSA showed that data entry and design work were high risk. The RULA is to evaluate the level of risk factors based on the working posture; on the other hand, the ROSA is to consider the use of peripheral, same as chair, keyboard/mouse, monitor and computer workstations. Conclusion: Conclusions of this study, the office work is necessary to identify the risk factors caused by the use of peripheral, as well as working posture.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.20 no.2
• /
• pp.119-126
• /
• 1992

The purpose of this study is to develop the allocation method which could be applied to the transitional stage between analysis and synthesis to select the best alternative in landscape planning process. By using the matrix of alternatives with site-planning elements locational drawing in each, the combinational allocation method can make the process more rational and also more efficient. Hand-drawn map overlay technique accommodates the work I handy way. The method is useful in building conceptual scheme in landscape planning especially when it is applied to small scale project.

• Journal of Fashion Business
• /
• v.10 no.1
• /
• pp.1-19
• /
• 2006

The purpose of this study is to investigate the social and cultural background of hand-knitting things with handcraft feeling which is appeared conspicuously after 2000. And to analyze the types and characteristics of hand-knit design. The resorts of this study is as follows: First, it is found that the pattern of stitch in their forms and ornament technique of handcraft feeling are the remarkable factors to decide the specific designs in the most of hand-knit designs. The major forms are plain stitch, rib stitch, cable stitch, lace stitch, relief stitch and pile stitch and the ornament techniques such as patch work, fringe, embroidery and collage are being widely used. Second, after 2000, due to peoples' preference for handcraft feeling manufactures, pursuit trend of artless luxury by retouch appeared, it made feeling for recurrence of the past and the warm humanity. In addition, the pro-eco trend using pro-environment materials and capturing the nature as images are on its way to advance. Through the mix & match of materials, details and items, it becomes possible to express many kinds of images. Thanks to those characteristics, the hand-knit designs are now acknowledged as luxurious with the couture sense attached and are shaking off their previous image of recycling.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.192-198
• /
• 2013

A light-weight enough to be portable yet functionally complete hand-writing machine was designed with hardware assembled and software implemented. The machine simulating human hand-writing not only allows identical massive scriptings on papers in human's proxy, but also offers emotional appearance as if the script was directly hand-written in ink. The features of human writing were independently put together to complete the action of scripting. The writing style could be altered in order to mimic a person's own specific writing style. The present work demonstrates that the assembled hand-writing machine was able to duplicate writing of scripts in almost parallel lines in consistent manner. The machine can be used in the emotional marketing area where seasonal greetings or thank-you cards are to be sent in massive manner. The pen-holding machine can also find an emotional application such as writing a short greeting note on a plastic lid on a disposable coffee cup in coffee-selling stores.

• Journal of Broadcast Engineering
• /
• v.19 no.6
• /
• pp.942-956
• /
• 2014

This paper proposes a real-time hand pose tracking method using a monocular RGB camera. Hand tracking has high ambiguity since a hand has a number of degrees of freedom. Thus, to reduce the ambiguity the proposed method adopts the step-by-step estimation scheme: a palm pose estimation, a finger yaw motion estimation, and a finger pitch motion estimation, which are performed in consecutive order. Assuming a hand to be a plane, the proposed method utilizes a planar hand model, which facilitates a hand model regeneration. The hand model regeneration modifies the hand model to fit a current user's hand, and improves robustness and accuracy of the tracking results. The proposed method can work in real-time and does not require GPU-based processing. Thus, it can be applied to various platforms including mobile devices such as Google Glass. The effectiveness and performance of the proposed method will be verified through various experiments.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.36-49
• /
• 1998

The purpose of this study is to investigate the relationship between the work postures and upper extremity cumulative trauma disorders(CTDs) in female medical insurance bill reviewers(n=448). This study included diagnosis for CTDs, anthropometry and job analysis (workstations and posture). The characteristics of subject were 33.6 years of average age and 8.7 years of average work duration. The results were as fallows. Ergonomic conditions of workstation were unsuitable compared with anthropometry result. The height of work surface(79.5 cm) and chair(43.0 cm)were high. work space was small, and legs space under the table was limited. Work postures were awkward compared with recommended neutral postures. Neck flexion($21.0-36.0^{\circ}$), elbow elevation, shoulder abduction ($46.0-47.0^{\circ}$). wrist radial and ulnar deviation, forearm supination and pronation, and wrist repeated motion(12.7-21.5 freq./min) were analyzed as hazardous risk factors by job analysis. The prevalence of CTDs was 32.8 % by medical diagnosis. The prevalence rate of CTDs in hazardous work posture group was significantly greater than safe work posture group both neck-shoulder (relative prevalence = 5.2, p<0.001) and wrist-hand (relative prevalence = 2.5, p<0.05).

• Korean Journal of Oriental Medicine
• /
• v.14 no.3
• /
• pp.103-111
• /
• 2008

Recently, skin diagnosis has been suggested as a promising tool for discrimination of Sasang Constitution, reported by examining the skin characteristics such as thickness, stiffness, slip, and skin textures like wrinkles and furrows. However, the works had a limitation in that clinical decision on the skin characteristics was made by relying upon oriental medicine doctors' subjective sense of touch. In order to objectify the skin diagnosis and claim its efficacy on the discrimination of the Sasang Constitutions, it is necessary to demonstrate its discrimination capability by providing numerical values in terms of physical quantities obtained from measurements using today's sensors and equipment technologies, which motivated this work as a priliminary step towards objectification of skin diagnosis. The skin characteristics focused in this work is the slip property of the back-hand skin that has been exploited using the dynamic friction measurement system. First, curved geometric effects of the back-hand skin on the measured lateral/vertical force signals were estimated using the artificially designed silicon coated structures, which led to a suggestion on a quality controlled experimental design based upon a empirical analysis model. Second, the experimental design thus suggested has been applied to the measurement of dynamic friction coefficients for two healthy male subjects of Taeumin (TE) and Soyangin (SY), respectively. The result shows that the dynamic friction coefficient is less for the SY subject than for the TE subject around the area of the skin used for diagnosis by the oriental medicine doctor, implying the TE subject's skin is more slippery than the SE subject's that is consistent with the oriental medicine doctor's diagnosis. Hopefully, this work can provide guidelines for obtaining quality data in friction measurement to be collected for discussion on the efficacy of the skin diagnosis and its objectification through statistical analysis.

• Safety and Health at Work
• /
• v.4 no.2
• /
• pp.100-104
• /
• 2013

Background: The aim of this study was to assess public and private medical diagnostic laboratories in Nigeria for the presence of biosafety equipment, devices, and measures. Methods: A total of 80 diagnostic laboratories in biosafety level 3 were assessed for the presence of biosafety equipment, devices, and compliance rate with biosafety practices. A detailed questionnaire and checklist was used to obtain the relevant information from enlisted laboratories. Results: The results showed the presence of an isolated unit for microbiological work, leak-proof working benches, self-closing doors, emergency exits, fire extinguisher(s), autoclaves, and hand washing sinks in 21.3%, 71.3%, 15.0%, 1.3%, 11.3%, 82.5%, and 67.5%, respectively, of all laboratories surveyed. It was observed that public diagnostic laboratories were significantly more likely to have an isolated unit for microbiological work (p = 0.001), hand washing sink (p = 0.003), and an autoclave ($p{\leq}0.001$) than private ones. Routine use of hand gloves, biosafety cabinet, and a first aid box was observed in 35.0%, 20.0%, and 2.5%, respectively, of all laboratories examined. Written standard operating procedures, biosafety manuals, and biohazard signs on door entrances were observed in 6.3%, 1.3%, and 3.8%, respectively, of all audited laboratories. No biosafety officer(s) or records of previous spills, or injuries and accidents, were observed in all diagnostic laboratories studied. Conclusion: In all laboratories (public and private) surveyed, marked deficiencies were observed in the area of administrative control responsible for implementing biosafety. Increased emphasis on provision of biosafety devices and compliance with standard codes of practices issued by relevant authorities is strongly advocated.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.171-176
• /
• 2020

This paper presents an implementation of a gesture recognition platform that can be used in a factory workplaces. The platform consists of signages that display worker's job orders and a control center that is used to manage work orders for factory workers. Each worker does not need to bring work order documents and can browse the assigned work orders on the signage at his/her workplace. The contents of signage can be controlled by worker's hand and arm gestures. Gestures are extracted from body movement tracked by 3D depth camera and converted to the commandsthat control displayed content of the signage. Using the control center, the factory manager can assign tasks to each worker, upload work order documents to the system, and see each worker's progress. The implementation has been applied experimentally to a machining factory workplace. This flatform provides convenience for factory workers when they are working at workplaces, improves security of techincal documents, but can also be used to build smart factories.