• Journal of the Korean Society of Food Culture
• /
• v.14 no.3
• /
• pp.259-269
• /
• 1999

The purpose of this study was to investigate the eating behavior, food preference and nutrition knowledge according to the body style of male college students. The subjects were 219 male students enrolled in University, Taegu. The data was collected by using a survey questionnaire and an anthropometric measurement. The results were summarized as follows: The mean height, weight and BMI of subjects were $173.8{\pm}8.7cm,\;65.8{\pm}7.9Kg,\;and\;21.9{\pm}2.4$, respectively. The subjects were divided into three groups according to the BMI: underweight group(<20); normal group(20-25); and overweight group(>25). One third of the subjects preferred to gain weight(33.8%); 47 subjects preferred to lose weight(21.5%); and the rest of the subjects satisfied their physique(44.7%). Most of subjects considered 'supper' as the most important meal during a day. Among the food items, the most frequently and evenly ingested item by subjects was 'Kimchi' : 'Ham and sausage' was the least preferred food among subjects. There was no significant difference in preference among three groups and almost half of the subjects had irregular meal time because of busy schedule. The preference for meat showed high score among underweight group; on the other hand, the preference for fruits and vegetables showed high score among overweight group. Usually subjects gained nutrition knowledge through media including newspaper, magazine and TV. There was no significant difference of the nutrition knowledge score among three groups. Based on these results, nutrition education program for the college student should be arranged in the classes.

• Food Science and Preservation
• /
• v.19 no.5
• /
• pp.783-791
• /
• 2012

The purpose of the study was to provide baseline information that could encourage consumers and establish the direction of development for sprouts and leafy vegetables. A survey on the consumption and preference for sprouts and leafy vegetables of 823 people over 20 years of age in Seoul and Gyeonggi province was conducted. The preference for sprouts was higher in men ($3.75{\pm}0.96$) than in women ($3.64{\pm}0.84$), whereas the preference for leafy vegetables was higher in women ($4.06{\pm}0.74$) than in men ($3.88{\pm}0.90$). Based on age, the respondents in their 40s or above had high preferences for sprouts and leaf vegetables due to the importance that they accorded to health and nutrition (p<0.01). The sprouts and leafy vegetables were purchased mainly for their high nutritional value. The purchase frequency of once a month or more for leafy vegetables (82.7%) was higher than that for sprouts (57.1%). The consumers purchased sprouts and leafy vegetables mainly from a large discount store. The respondents in their 20s showed the highest percentage of purchasing from a local store whereas the older ones showed a high preference for traditional markets. The reason for the choice of the place of purchase was convenience. The freshness and price were important factors in the consumption of sprouts and leafy vegetables. In the case of leafy vegetables, the consumers preferred to buy them using the conventional weight measurement system rather than in small packages. On the other hand, mixed small packages were preferred for sprouts. The purchase frequency was correlated with the preferences, need for improvement and purchase intent for sprouts and leafy vegetables. The aspects that require improvement for producing high-quality sprouts and leafy vegetables were the nutritional and functional properties. To increase the consumption of sprouts and leafy vegetables, there is need for variations and improvement of the quality and safety of the products.

• Journal of Korean Public Health Nursing
• /
• v.1 no.1
• /
• pp.45-61
• /
• 1987

This Study was an attempt to estimate the optimum numbers of Operating Room Nursing Manpower by measuring the amount of service hours required by the patients in Operating Room in relation to the service amount actually provided by the nurses. The major concern of this study was placed on the measurement of Nursing Service Requirements by using the Operating Room (O. R) Patient Acuity System recently developed by M. M. Hart to classify the O. R. patients into four groups according to the degree of the complexity of operative procedure and some other elements which increase nursing activities in respect of patient care; Acuity IV group is the one requires nursing services most, on the other hand Acuity I requires least. nu sing The objectives of this study were as follows; 1. To analyze functions of the nursing personnel in O. R. by time unit and to estimate the average time a nurse can activate for productive functions. 2. To measure the actual amount of nursing times provided by nurses to the surgical patients. 3. To develop a patient classification system in order to measure the amount of Nursing services required by the patients. 4. To calculate an appropriate number of nursing manpower to meet the needs of the patients. In order to conduct the research both selected nurses and patients in 'S' University Hospital were Studied by utilizing the O. R. Patient Acuity System as well as the Classification Chart developed by Association of Operating Room Nurses (A. O. R. N) as a means of classifying functions of O. R. nurses. That is; Functions of the 10 selected O. R. nurses observed during the period of June 30 to July 4, 1986, whereas the amount of nursing services required by or provided to the 974 patients who had received surgeries during the period of June 9 to July 4, 1986. The results of this study were as follows; 1) The actual working hours per a nurse averaged 6.7 hours a day. 2) Each nurse's daily routine schedule consists of $71.4\%$ for Technical Functions, $16.1\%$ for Nonprodective Functions, $6.6\%$ for Assessment and Evaluation, $3.9\%$ for Overseeing and Supervision and the rest $2.0\%$ for Patient Preparation respectively. 3) Preoperative waiting time per a patient was 24.1 minutes on the average; for the first case was 10.7 minutes, whereas for the following cases was 32.0 minutes. 4) Total Operation time for the 974 patients during the period of observation for this study amounted to 2759.6 hours, weekly hour was equivalent to 689.9 hours, Whereas daily operation time averaged 130 hours. Meanwhile the average operation time per patient was 2.8 hours ; for the case of Acuity IV was 5.6 hours, 5. 1 hours for the case of Acuity III, 2.3 hours for Acuity II and 1.1 hours for Acuity I. 5) According to the O. R. Patient Acuity System, $64.5\%$ of the whole patients belonged to Acuity II, $23.7\%$ to Acuity III, 11. $3\%$ to Acuity IV and $0.7\%$ to Acuity I respectively. 6) Required amount of nursing times based on the preoperative waiting time and operation time was 7167.8 person hours, which showed that $5.5\%$ of them needed for preoperative nursing care, whereas the rest $94.5\%$ for intraoperative nursing care. In terms of the O. R. Patient Acuity System, $49.7\%$ of total nursing service requirements was needed for Acuity II patients, $27.4\%$ for Acuity III patients, $17.2\%$ for Acuity IV patients and $0.2\%$ for Acuity I patients. 7) The rate of the nursing services provided against the required nursing times was about $81.4\%$ on the average; some departments, like those of Plastic Surgery, Otolaryngology and Ophthalmology whose patients mostly belonged to Acuity II recorded hegher provision rate than average, whereas other departments of Thoracic Surgery. Neurosurgery and Orthopedic Surgery whose patients belonged to Acuity III and Acuity IV as well as Acuity II recorded lower provision rate than average. 8) Subsequently, required numbers of nursing manpower was 10.7 nurses additionally. Based on the above findings the following recommendations will be made; 1) this study recommends, develops. and adopts an accurate and realistic O. R. Patient Acuity System which can help measure the nursing service requirements objectively to elicit the rationales of allocation of nursing personnels. 2) this study proposes storongly place nurses who take the role of preoperative nursing care exclusively for the waiting patients in O. R. and shortening their waiting time by close communication between the designated O. R. and the ward.

• Korean Journal of Environment and Ecology
• /
• v.32 no.3
• /
• pp.313-322
• /
• 2018

To investigate the changing patterns of sub-alpine forest vegetation due to climate change requires accumulation of contiguous reference data and continuous monitoring. Furthermore, it is crucial to monitor short-term ecological change of lower level vegetation to understand the trend of long-term vegetation change. Therefore, this study carried out a vegetation survey and tree diameter measurement in 36 plots of Mt. Jiri inhabited by Abies koreana species from 2015 to 2017 to examine the short-term dynamics of Abies koreana seedling and the change of vegetation distribution according to altitude. We analyzed the importance value and MIV (mean importance value) of major species by each stratum as well as the importance value and species diversity index of major species and the change of seedling population by altitude. The results showed that Abies koreana had the highest importance value on tree layer, Rhododendron schlippenbachii on shrub layer and Tripterygium regelii on herb layer. MIV was high in the order of Abies koreana, Rhododendron schlippenbachii and Acer pseudosieboldianum. Regarding the species composition and species diversity index (H') along the altitudinal gradient, Sasa borealis showed high MI and low H' in the elevation less than 1,500 m, and IV of Tripterygium regelii and H' of herb layer were high in the elevation of 1,700 - 1,800 m. Abies koreana seedling decreased by 22.4% from 1,250 n/ha in 2015 to 970 n/ha in 2017 (p <0.05) throughout the investigated area. The decline rate along seedling and sapling height were 22.9% in less than 10 cm, 3.4% in 10-30 cm, 8.9% in 30-50 cm, 39.3% in 50-100 cm, and 55.1% more than 100 cm. Few of A. koreana seedlings appeared due to the dominance of Sasa borealis in the elevation of 1,500 m or less and due to the dominance and high species diversity of Tripterygium regelii in the elevation of 1,700-1,800 m. On the other hand, many of A. koreana seedlings appeared in the elevation of 1,600-1,700 m due to no distribution of S. borealis and T. regelii species in that altitude range. Therefore, we concluded that those seedlings and saplings of A. koreana could be more stable in the altitude of 1,600-1,700 m.

• Management & Information Systems Review
• /
• v.35 no.4
• /
• pp.1-19
• /
• 2016

The researchers in strategic management have focused on identifying the effects of CEO's demographic characteristics and experience on the strategic choices and performance of firms. On the other hand, they have failed to identifying the effects of CEO's psychological characteristics on them because of the difficulties over data collection and measurement for variables. To overcome this limitation of prior researches, this study is designed to achieve two specific objectives. The first is to examine the effect of CEO narcissism on diversification strategy and performance of listed corporations on Korean securities market in an economic downturn. The other is to examine the moderating effects of various corporate governance systems that are related to board and/or ownership structures on those relationships. The empirical setting for this study was drawn from a multi-year(2011~2014) sample of large listed corporations in Korean securities market. To achieve the objectives, the hypotheses of research are analyzed by implementing multiple regression analyses in two separate models. The results of these analyses show that CEO narcissism is positively related to the diversification of listed large corporations in Korean securities market. Regrading the moderating effects, the stake of institutional investors weakens the positive relationship between CEO narcissism and firm's diversification. The findings of this research imply that CEO narcissism can intensify the tendency of Korean corporations to adopt high-risk and high return strategy in an economic downturn. Thus, firms might be able to use CEO narcissism to drastically restructure the business portfolio in an economic downturn. However, Korean corporations should be very cautions to maximize the positive effect of CEO narcissism. They might be use the institutional investors as their corporate governance system to monitor and control the opportunism of CEO in the decision for diversification in an economic downturn.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• Journal of Conservation Science
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2015

In the case of adhesives & restoration agents currently being used for the preservation treatment of ceramics and earthenware, epoxy type, cellulose type and cellulose type are mainly being used. However, they are showing various problems such as re-detachment from severe contraction, color change from yellowing, work inconvenience of staining on tools and hand during usage and irreversibility. For the purpose of solving the issues of yellowing and irreversibility of epoxy resin being used to restore ceramics, urethane synthetic resin with low yellowing excellent reversibility has been developed in this study. The adhesive strength of urethane resin that has been developed has excellent properties with 2.07MPa for undiluted solution, which is 1.5 times higher than that of existing material EPO-$TEK301^{(R)}$ 1.21MPa. The result of workability measurement showed that the wear rate of urethane resin (in Talc 50wt%) was 1.09%, which was somewhat higher than that of existing material Quick $Wood^{(R)}$ (1.02%). In addition, its wear rate is two times higher than that of $EPO-TEK301^{(R)}$ (0.41%) and $L30^{(R)}$ (0.39%), thereby showing an advantage in its forming process compared to existing materials. As for the advantage of urethane resin of reversibility experiment, 12 hours after acetone, ethyl alcohol deposition, urethane resin and filler talc were dissolved 100% while showing powdering phenomenon. Compared to 0% reversibility of existing epoxy resin, it has much superior reversibility. The result of UV rays experiment to evaluate its durability showed that ${\Delta}E^*ab$ color change value based on undiluted solution of urethane resin was 2.76 before & after UV rays exposure, which was a decrease by about 7-20 times compared to that of existing resin, thereby minimizing the issue of heterogeneity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.465-471
• /
• 2008

Physicochemical characteristics of black garlic were analyzed. Colorimetry measurement showed that the black garlic, compared with fresh and steamed garlics, was the highest in a value and the lowest in L and b values. Crude lipid, crude protein, and total sugars were the highest in black garlic, which was followed by steamed and fresh garlic. On the other hand, moisture content was the lowest in the black garlic and the highest in the fresh garlic. The pH of garlics was ca. 6.8, 6.5, and 4.4 in fresh, steamed, and black garlic, respectively, which indicated that garlics tended to be acidified with the thermal processing. Total pyruvate and total thiosulfinates were the lowest in steamed garlic ($77{\mu}mol$/g and 0.07 OD/g for each) and the highest in black garlic ($278{\mu}mol$/g and 0.77 OD/g). Arabinose and galactose were detected only in black garlic and their contents were 1.6 and 13 mg/100 g, respectively. Free sugars such as glucose, sucrose and fructose were the highest in the order of fresh, steamed, and black garlic. Potassium was a predominant mineral in all garlics, constituting 76% of total minerals. Glutamic acid, arginine, and aspartic acid were the major composition amino acids in all garlics, regardless of processing conditions. 15 kinds of free amino acids were detected in fresh and steamed garlic, while five more free amino acids, O-phosphoethanolamine, and urea were additionally detected in black garlic.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.1
• /
• pp.59-67
• /
• 1995

Blood lead assay by $D_2$ lamp background correction method of atomic absorption spectrophotometer(AAS) with wavelength of 283.3 nm is most popular in occupational health practice in Korea. On the other hand, $D_2$ lamp background correction method with wavelength of 217.0 nm is also often used in general chemical analysis for lead assay in general purpose. But both methods have some weakness of background correction which brought direct effect on the results of analysis. Recently blood lead assay with polarized Zeeman effect of AAS was introduced and is now preferred in many laboratory than $D_2$ correction method in blood lead analysis. But still AAS with $D_2$ lamp are widely used in the field of occupational health in Korea. This study compared blood lead assay data with $D_2$ correction methods(283.3 and 217.0 nm) and with that of polarized Zeeman effect correction method to evaluate the validity of 02 correction methods. The results obtained were as follows; 1. Taking the value of polarized Zeeman effect method as reference value of 1.00, the mean relative value of $D_2$ correction method with wavelength of 217.0 nm was 0.92 and that with wavelength of 283.3 nm was 0.90 respectively in the analysis of blood lead whose value were below $20.0{\mu}g/dl$(p<0.001). Both mean values were statistically smaller than polarized Zeeman effect correction method. But in the analysis of blood whose value were between 20.0 to $20.0{\mu}g/dl$, the mean relative value of $D_2$ correction method was 0.96 in both wavelength and did not differ from polarized Zeeman effect method(p<0.001). There was no difference of blood lead between $D_2$ correction method and polarized Zeeman effect method in the analysis of blood lead whose value were over $40.0{\mu}g/dl$. 2. The variations of background correction value in polarized Zeeman effect method were not changed by increase of blood lead, but those in $D_2$ correction methods were increased by the increase of blood lead. While then relative standard deviation(RSD) of data measured by Zeeman effect method were decreased by the increase of blood lead, those by $D_2$ methods were nol differed by the increase of blood lead.