• 한국의류학회지
• /
• 제28권9_10호
• /
• pp.1300-1311
• /
• 2004

The aim of this study was to provide the 2 and 3 dimensional statistics requisite in the sizing system and design of gloves. The 64 2-dimensional static measurements were selected to provide information about hands. Participants in the study were 824 adults, aged between 18 and 64. To summarize the information from the measurement values, a Factor Analysis and a Cluster Analysis among multivariate analyses were performed. 3-D scanner was used for visual results of hand shape of each cluster. The results were as follows. Twenty-two items were used for the factor and cluster analysis in order to classify the adult hand shape. The variable quantities that are explained by a total of 3 factors amounted to under 79.37% of the variable quantities. The definition results of the factors related to the hands are as follows: Factor 1 is the horizontal dimension, the thickness of hand factor; Factor 2 is the height of the crotch; and Factor 3 is the vertical dimension of the hand. The adults' group hand was divided into 2 clusters according to a cluster analysis using factor scores. The characteristics according to hand type were as follows: Cluster 1 referred to high horizontal dimensions and thickness, rather small vertical dimensions and crotch height; and Cluster 2 represented the rather smaller horizontal dimensions and thickness but longer hand length than Type 1. To provide specific shape data of each cluster, 3-D scanner measurement was performed. 3-dimensional data base was developed for each cluster type and visual information was provided.

• 대한인간공학회지
• /
• 제24권4호
• /
• pp.15-21
• /
• 2005

Use of a glove made of materials with a low elasticity decreases the performance of the hand such as agility, dexterity, range of motion, and grip strength. The present study examined if the adverse effects of a low-elastic glove can be reduced by a design which accommodates the changes of hand surface lengths by hand motion. Two glove designs which provide patches of elastic cloth and pleats at the finger joints and knuckle were developed by considering the hand surface length changes, and then compared with two conditions(bare hand and conventional glove design that does not consider the dynamic characteristics of the hand dimensions) in terms of completion time in peg board insertion task, maximum grip strength, discomfort in hand motion, discomfort in force exertion, and overall discomfort by 24 right-handed participants. The test results confirmed that wearing of a glove significantly reduced the agility and grip strength capability of the hand and indicated that the novel designs were effective to lessen the performance decreases compared to the conventional design. Also, of the glove designs, the pleat glove design was found most preferred for both better hand performance and less subjective discomfort.

• 산업공학
• /
• 제24권2호
• /
• pp.105-111
• /
• 2011

Measurement protocols for hand anthropometry have been studied for ergonomic product design. The present study developed a 3D semi-automatic measurement protocol (3D-SAMP) which semi-automatically measures various hand dimensions using a 3D scanner. The 3D-SAMP was compared with the conventional direct measurement method (DMM) to examine its effectiveness. The 3D-SAMP consists of (1) fabricating a plaster cast of the hand, (2) placing landmarks on the plaster hand, (3) scanning the plaster hand with a 3D scanner, (4) identifying automatically the positions of the landmarks on the digital hand, and (5) extracting automatically hand anthropometric measurements (lengths, widths, thicknesses, and circumferences). An evaluation experiment conducted in the study found the 3D-SAMP preferred to the DMM in terms of reliability (the number of dimensions exceeding the variability criteria SD=2 mm and CV=5% : 3D-SAMP =2 and DMM=24) and ease of measurement (3D-SAMP=5.2 and DMM=4.3 out of 7). The 3D-SAMP can be applied to ergonomic design of a hand-held product.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.24-27
• /
• 2003

This paper discusses practical strategies for transition from a pinching to a power grasping, where a multi-fingered hand mounted on a robotic arm envelops a cylindrical object on a table. When the manipulation system grasps a cylindrical object like a pen on a desk, a complete enveloping is not impossible in the initial configuration. The system firstly pinches the object only with two or three fingers and then grasp it with fingers and a palm after regrasping. In this pinching-grasping transition maneuver, human unconsciously selects proper strategy according to some conditions including object dimensions and initial pinching positions. In this paper we therefore develop six possible strategies for this pinching-grasping transition and then investigate their performances for some objects with various dimensions and various grasping positions, using numerical simulations. Based on their results, effective strategies are implemented by using a hand-arm system.

• 대한가정학회지
• /
• 제43권8호
• /
• pp.115-122
• /
• 2005

The hand performs functions such as grabbing and other movements. In order to accomplish these movements in various kinds of operational environments, appropriate gloves must be worn to protect your hands. Choosing the appropriate type of glove is very important when wearing gloves in these types of operational environments. The reasons one wears gloves varies depending on age and gender. Unmarried women in their early twenties, for example, occasionally wear gloves for decoration rather than for functional reasons. However, previous studies examined a range of topics, and as such investigations dealing with specific body shape and demands of consumer are needed. Therefore in this study, the hands of unmarried women ranging in age from 20 to 24 were measured and hand shape types were analyzed in order to present basal data which can be used to help design improved glove patterns and produce appropriate, functional gloves. A total of 261 Korean women were measured. Fifty-seven right hand dimensions were measured and five dimensions from both hands were measured. Six factors were identified through factor analysis and those factors constituted $73.259\%$ of total variance. Two clusters of hand shapes were categorized using 6 factor scores by cluster analysis. Type 1 hand shape is defined as long hands with small width, girth, and thickness, long and thin fingers, and high vertical palm height. Type 2 hand shape is defined as short hands with large width, girth and thickness, short fingers, thick knuckles, and short vertical palm height. The characteristics of type 1 and 2 hand shapes are similar to women's hand type classification results from previous reports, but there was a significant difference in subject distribution by type. Therefore, standard data on hand shapes should be produced by developing measuring instruments and selling more accurate standard measuring points. By doing this it could help in the development of improved glove patterns, and also aid in planning production based on hand type.

• 한국의류학회지
• /
• 제29권5호
• /
• pp.662-670
• /
• 2005

The purpose of this study was to find out the effect of color, tone, perceiver's gender on image perception of natural dyeing of cotton and mosi. The experimental materials developed for this study were a set of stimuli and response scale(The 7-point semantic). The stimuli was 20 fabrics manipulated with two kinds of fabrics(cotton, mosi), five colors(red, yellow, blue, green, purple) and two tone variations. The subjects were 412 adults in Daejeon and Kongju. The results were as follows: The perceived image of the stimulus material consisted of 4 dimensions (attractive, conspicuous, hand, weight) colors, tons, materials as well as perceiver's gender affected on some selected image dimensions color affected on the four image dimensions, tone affected on the conspicuous, hand and weight images, materials affected on the attractive and hand image and perceiver's gender affected on the weight image. Interaction effects existed among colors, tons and materials on the conspicuous image. In conclusion the results support gestalt theory in which the sum of the parts is bigger than the whole and design strategies for the Mosi fabrics should be developed on the basis of persuited design image as well as target consumers.

• 한국광물학회지
• /
• 제3권2호
• /
• pp.89-97
• /
• 1990

To examine how London energy controls the c-dimensions of phyllosilicates, London energy, as well as Coulomb and Pauli repulstion energy was calculated as a function of d(001) for 1M and d(002) for 2M 1 phyllosilicates. London and Pauli repulstion energy calcualtion use a direct interaction calculation method and Coulomb energy calculation adopts Fourier synthesis method. The energy calculations show that Coulmb and Pauli repulsion energy dominantly control the c-dimensions of phyllosilicates having the interlayer cationss, i.e., the layer charges. On the other hand, if phyllosilicates have no interlayer cations, London energy is solely responsible for holding the layers and maintain the c-dimensions. The significance of London energy in determining the c-dimensions of phyllosislicates de-creases as the layer charge increases. When the layer charge is lower than one equivalent on the basis of Oη(OH)2 formula, London energy plays an important role in determing the c-dimensions. however, if the layer charge is higher than one equivalent, London energy becomes insignifi-cant in determining the c-dimension.

• 산업공학
• /
• 제16권2호
• /
• pp.140-148
• /
• 2003

This study was performed to measure the various dimensions of the hand for Korean adults. Three hundred and eighteen males and two hundred and sixty females, age ranged 18 to 60, participated in this study. Thirty-five dimensions were selected to measure. Subjects were divided into three age groups, 18 to 29, 30 to 39, and 40 to 60, for each sex. The data were analyzed to see the differences between the age groups and sex by using SAS program. The results showed that the measurements related to breadth and thickness tended to increase as the age increased. Wrist breadth, index finger breadth(distal), index finger breadth(proximal), thumb breadth, and index finger thickness(proximal) increased as the age increased for both males and females (p<0.05). However, the measurements related to length tended to increase as the age decreased. The relationship between the parts that are length related showed high correlation. Hand length showed high correlation with palm length, middle finger length and index finger length. Males' were significantly greater than females' in every dimension (p<0.05). Also, the results of this study were compared with the data of Japanese and U.S. army. The results of this study can be used to design the hand related products.

• Safety and Health at Work
• /
• 제6권1호
• /
• pp.9-17
• /
• 2015

The human hand is a complex structure that performs various functions for activities of daily living and occupations. This paper presents a literature review on the methodologies used to evaluate hand functions from a biomechanics standpoint, including anthropometry, kinematics, kinetics, and electromyography (EMG). Anthropometry describes the dimensions and measurements of the hand. Kinematics includes hand movements and the range of motion of finger joints. Kinetics includes hand models for tendon and joint force analysis. EMG is used on hand muscles associated with hand functions and with signal-processing technology.

• 대한인간공학회지
• /
• 제12권1호
• /
• pp.25-38
• /
• 1993

The objective of this study is to collect and analyze the anthropometric data for Korean adults. These data are intended to be used for the product design in industry. Sixty three college students participated in the measurement. One hundred twenty four lengths, thirty circumferences, four strengths, weight, and age data were collected. Descriptions and statistical analysis of the anthropo- metric data are summarized. The results were compared with foreign data available. It was found that forty weven body dimensions were closely correlated each other. It was also found that three dimensions, stature, eye height, and hand length, can be assessed by adding other body dimensions.