• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.3
• /
• pp.219-225
• /
• 2014

In this study, to find the characteristics of the oscillation of a terminating shock wave in a transonic airfoil flow with non-equilibrium condensation, a NACA00-12,14,15 airfoil flow with non-equilibrium condensation is investigated through numerical analysis of TVD scheme. Transonic free stream Mach number of 0.81-0.90 with the variation of stagnation relative humidity and airfoil thickness is tested. For the free stream Mach number 0.87 and attack angle of ${\alpha}=0^{\circ}$, the increase in stagnation relative humidity attenuates the strength of the terminating shock wave and inactivates the oscillation of the terminating shock wave. For the case of $M_{\infty}=0.87$ and ${\phi}_0=60%$, the decreasing rate in the frequency of the shock oscillation caused by non-equilibrium condensation to that of ${\phi}_0=30%$ amounts to 5%. Also, as the stagnation relative humidity gets larger, the maximum coefficient of drag and the difference between the maximum and minimum in $C_D$ become smaller. On the other hand, as the thickness of the airfoil gets larger, the supersonic bubble size becomes bigger and the oscillation of the shock wave becomes higher.

• Journal of the Korean Ceramic Society
• /
• v.31 no.2
• /
• pp.220-226
• /
• 1994

The hydrolysis and condensation reactions in the mixed alkoxide solutions of Si(OC2H5)4 and Zr(O-nC3H7)4 with various water contents (1, 2, 4, and 8 in molar ratio to alkoxide, r) and catalysts were examined by rheological measurements and the number average molecular weight in order to explain the shape of the polymer in the mixed alkoxide solutions. It was found that fibers could be drawn in the viscosity range of 1∼100P from the acid-catalyzed solutions with lower water contents of the mole ratio H2O/alkoxide, r 2. On the other hand, crack free bulk gel was formed from the acid-catalyzed solutions including a large amount of water (r 4), and the base-catalyzed solutions. The relation between the intrinsic viscosity [{{{{ eta }}] and the number average molecular weight n, namely [{{{{ eta }}]=Knα, has shown that the acid-catalyzed spinnable solutions (r=1 and 2) have linear polymers and the exponent α's are about 0.56 and 0.81, whereas non-spinnable solutions (r=4 and 8) have three dimensional network polymers or spherical particles and the exponent α's are 0.41∼0.51 and 0.35.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.28 no.2
• /
• pp.1-14
• /
• 2015

Objectives : This study was designed to investigate the effects of Taraxaci Herba (TH) on cell death in breast cancer cells. Methods : In this experiment, the effects of TH on proliferation rates, cell morphology and growth pattern, intracellular reactive oxygen species (ROS) production. In addition, the effects on nuclear condensation, fragmentation and formation of acidic vesicular organelles (AVO) in MCF-7 cells were also investigated. Finally, autophagy related with protein was observed by using western blot method. Results : TH inhibited proliferation of MCF-7 cells, TH elevated intracellular ROS levels significantly. Treatment with TH did not affect nuclear morphologies such as condensation or fragmentation. On the other hand, TH treatment effectively induced AVO. Finally, one of autophagy related with protein, Microtubule-associated proteins 1A/1B light chain 3A (MAP1LC3A, LC3) level was elevated by treatment with TH. Conclusions : These data indicate that TH is able to be used for patient with breast cancer and mechanisms are involved in autophagy through ROS generation.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.10
• /
• pp.1545-1550
• /
• 2004

meso-Functionalized dipyrromethanes 6-10 were synthesized by acid-catalyzed addition of pyrrole to ${\alpha}$-position of 2-alkenyl pyrroles. The regiochemistry of the reaction can be explained by either the formation of more stable carbocation intermediate or ${\beta}$-addition of ${\alpha},{\beta}$-unsaturated carbonyl compounds. The starting 2-alkenyl pyrroles were synthesized by Aldol condensation of 2-formylpyrrole with active methylene compounds such as nitromethane, diethylmalonate and malononitrile. Attempted ‘2+2' condensation of meso-diethylmalonyldipyrromethane, meso-(p-tolyl)dipyrromethane and p-tolualdehyde afforded three different porphyrins 12, 13 and 14 in reasonable yields. On the other hand, meso-(nitromethyl)dipyrromethane with p-(tbutyl) benzaldehyde resulted in the formation of three different porphyrins such as 5,15-dicyano-10,20-diarylporphyrin (16), 5-cyano-15-formyl-10,20-diarylporphyrin (17) and 5,15-diformyl-10,20-diarylporphyrin (18) in low yields. Conversion of nitromethyl groups to nitrile and (or) formyl group was observed under the porphyrin forming conditions.

• Journal of Power System Engineering
• /
• v.21 no.2
• /
• pp.64-69
• /
• 2017

The purpose of this study is to investigate the performance characteristics of seawater cooling system for a fishing vessel. The circulation amount of refrigerant, condensation capacity, evaporation capacity, compression work and coefficient of performance(COP) were analyzed as the heat source temperature changed. The experimental setup consisted of an open-type compressor, a shell&tube type condenser, an evaporator and an expansion valve. The heat source was controlled by a constant temperature chamber. The main results of this study are summarized as follows. The condensation capacity increased with increasing heat source temperature, and it was confirmed that the effect of circulating amount of refrigerant was dominant. The amount of heat for vaporization was almost constant even though the temperature of the heat source increased. On the other hand, the compression power was increased. This is because the compression ratio increases as the condensation pressure, the enthalpy difference between inlet and outlet, the amount of circulating refrigerant increases. The performance coefficient of this system showed a tendency decreasing with increasing heat source temperature. Therefore, the basic data of the seawater cooling system for the maintenance of the catch line of the shore fishing boats was acquired through this study, and it is considered that it will be sufficient for the actual design.

• Particle and aerosol research
• /
• v.17 no.3
• /
• pp.43-54
• /
• 2021

Size distributions of atmospheric particulate matter (PM) and its water-soluble organic and inorganic components were measured between January and February 2021 at an urban site in Gwangju in order to identify the major factors that determine their size distributions. Their size distributions during the study period were mainly divided into two groups. In the first group, PM, NO₃^-, SO₄^2-, NH₄⁺ and water-soluble organic carbon (WSOC) exhibited bi-modal size distributions with a dominant condensation mode at a particle size of 0.32 ㎛. This group was dominated by local production of secondary water-soluble components under atmospheric stagnation and low relative humidity (RH) conditions, rather than long-range transportation of aerosol particles from China. On the other hand, in the second group, they showed tri-modal size distributions with a very pronounced droplet mode at a diameter of 1.0 ㎛. These size distributions were attributable to the local generation and accumulation of secondary aerosol particles under atmospheric conditions such as atmospheric stagnation and high RH, and an increase in the influx of atmospheric aerosol particles by long-distance transportation abroad. Contributions of droplet mode NO₃^-, SO₄^2-, NH₄⁺ and WSOC to fine particles in the second group were significantly higher than those in the first group period. However, their condensation mode contributions were about two-fold higher in the first group than in the second group. The significant difference in the size distribution of the accumulation mode of the WSOC and secondary ionic components between the two groups was due to the influx of aerosol particles with a long residence time by long-distance transport from China and local weather conditions (e.g., RH).

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.13-18
• /
• 2017

Water glass is much cheaper than silicon alkoxide, so it has advantage for commercialization. A condensation by acid catalyst makes considerable effect about the properties of water glass based silica aerogel among many factors in silica aerogel process. The pore structural properties of water glass based silica aerogel such as specific surface area and pore size distribution have been investigated through the changes in the amount and the kinds of acid catalyst. It has been confirmed that water glass based silica aerogel is affected by various conditions of catalyst in the condensation reaction such as the kind, concentration, and the amount of mole of acid catalyst on the properties of final products. Especially, it is checked that the effect of mole of acid is more prominent than that of concentration. In the case for conventional method with introducing 4M HCl in condensation step, the silica aerogel could be synthesized which has $394m^2/g$ of specific surface area, 2.20 cc/g of pore volume, 22.3 nm of average pore size, and 92.53% of porosity. On the other hand, when 4M sulfuric acid was used with 73 mmol at the condensation step of water glass based silica aerogel, the pore structural characteristics of water based silica aerogel showed better properties than the case of using HCl, for example, specific surface area was measured as $516m^2/g$, and pore volume, average pore diameter, and porosity were obtained as 3.10 cc/g, 24.1 nm, and 96.1%, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.15 no.5
• /
• pp.47-54
• /
• 1991

The lip seals widely used nowadays in stern tube sealing system of ships have radial sealing contact with shafts or liners, on the other hand the face seals of stern tube sealing system have axial sealing contact with seat. Because of axial sealing contact, the face seals have a large number of merits such as durability of life, simplicity of structure, easy fitting and replacement, etc. In this paper, for the purpose of development of face seals, the fundamental properties of axial sealing contact were analyzed and a trial face seal was designed and manufactured using N.B.R. rubber and Thordon which is widely used for bearing materials. The seal proper of trial face seal was made from N.B.R. rubber and the face insert was made from Thordon, thermosetting resins which are three dimensional, cross linked condensation polylmers. The performance test of trial face seal was carried out on the test bench which was specially designed and manufactured. The results were satisfactory enough to be used in practical stern tube sealing system.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.421-426
• /
• 2007

A linking ligand containing sulfur donor atoms in the terminal thiophene rings, 1,2-bis(thiophen-2-ylmethylene) hydrazine (L), was prepared by Schiff-base condensation. Ligand L reacted with [PdCl2(NCPh)2] to produce a molecular Pd compound [PdL2Cl2] (1). On the other hand, it reacted with AgNO3 and AgClO4 to produce a 2-D network [AgL0.5(NO3)] (2) and a 1-D polymer [AgL]ClO4 (3), respectively, whose structures are based on secondary intermolecular forces such as H-bonding, van der Waals interaction, and π-π stacking. Polymer 2 exhibited photoluminescence at room temperature in the solid state.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.6
• /
• pp.476-479
• /
• 1987

The macrocyclic nickel complex of the molecular formula[Ni($C_{32}H_{26}N_4$)] has been synthesized from the template condensation reaction between 1-benzoylacetone and o-phenylenediamine in the presence of nickel acetate. Protonation and deuterium exchange reactions of the demetallated macrocyclic ligand and the nickel complex have been carried out. The infrared, electronic and proton magnetic resonance spectral data of both compounds are compared and discussed; protonation of the macrocyclic ligand take place at the nitrogen atoms and all the amine protons undergo very rapid deuterium exchange while the methine protons undergo very slow exchange. On the other hand, protonation of the nickel complex occurs at the nitrogen atoms and only amine protons undergo rapid deuterium exchange. Protonation and deprotonation of the nickel complexes proceed reversibly.