• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.396-402
• /
• 2006

In this study, dynamic characteristics of water hammer pressure in water supply piping system with water hammer arrester has been investigated experimentally to characterize the transient pressure of water hammer in high rise building. Experiments were conducted to verify the absorption effects by water hammer arresters with 3 different gas volumes of water hammer pressure generated by sudden valve closure. As the results, it has been found that zoning and sizing of pipe diameter for suitable flow velocity and water hammer arresters with effective pressure absorption capacity have to be installed to protect water hammer problems in building water supply piping system.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.405-412
• /
• 2002

The performance of a hammer/driving systems is a major factor which affects bearing capacity and integrity of installed piles. Hammer performance can be evaluated from the results of dynamic pile testing using Pile Driving Analyzer(PDA). By comparing the rated energy with measured maximum transferred energy(EMX), the energy transfer ratio(ETR) can be calculated. This paper based on the dynamic measurements of 442 cases in 130 piling projects and evaluated ETR according to the hammer types(hydraulic and drop hammers) and pile types(steel and concrete piles).

• 한국지반공학회지:지반
• /
• 제12권5호
• /
• pp.117-126
• /
• 1996

표준관입시험은 시험절차의 간편성 등 많은 장점에도 불구하고 시험장비와 시험보조장치 및 시험관리 등에 따라 시험결과인 N치에는 여러가지 오차가 포함되는 시험으로 알려져 있다. 특히, 해머가 낙하할 때에 발생하는 에너지 손실 때문에 실제의 해머 타격에너지와 이론치는 크게 다르기 마련이다. 이 연구에서는 초음파 송수신장치와 PC를 이용하여 국내의 여러 현장에서 시행되고 있는 표준관입시험에서 해머타격에너지를 측정하여 이론치와 비교하였다. 연구결과 R-P해머와 자동해머의 해머에너지비는 이론치에 대하여 각각 64.2%및 75.0%로 측 정되었다. 측정결과에 동적효율 0.72를 적용하여 측정 N치를 보정할 수 있는 평균에너지비를 산출한 결과는 각각 46% 및 54%였다.

• International Journal of Fluid Machinery and Systems
• /
• 제5권3호
• /
• pp.109-116
• /
• 2012

Water hammer pumps can effectively use the water hammer phenomenon for water pumping. They are capable of providing an effective fluid transport method in regions without a well-developed social infrastructure. The results of experiments examining the effect of the geometric form of water hammer pumps by considering their major dimensions have been reported. However, these conventional studies have not fully evaluated pump performance in terms of pump head and flow rate, common measures of pump performance. The authors have focused on the effects on the pump performance of various geometric form factors in water hammer pumps. The previous study examined how the hydrodynamic characteristics was affected by the inner diameter ratio of the drive and lift pipes and the angle of the drive pipe, basic form factors of water hammer pumps. The previous papers also showed that the behavior of water hammer pump operation could be divided into four characteristic phases. The behavior of temporal changes in valve chamber and air chamber pressures according to the air volume in the air chamber located downstream of the lift valve was also clarified in connection with changes in water hammer pump performance. In addition, the effects on water hammer pump performance of the length of the spring attached to the drain valve and the drain pipe angle, form factors around the drain valve, were examined experimentally. This study focuses on the form of the lift valve, a major component of water hammer pumps, and examines the effects of the size of the lift valve opening area on water hammer pump performance. It also clarifies the behavior of flow in the valve chamber during water hammer pump operation.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.286-288
• /
• 2004

The purpose of this study is to evaluate the effects of hammer peening on the redistribution of residual stress at the repair weldment of cast iron using FEA. The FEA results were verified by comparing with experimental results. The maximum residual stress at the repair weldment of cast iron sharply decreases by hammer peening. The effect of hammer peening on the residual stress increases with a decrease of working temperature of hammer peeing.

• 산업기술연구
• /
• 제22권A호
• /
• pp.119-125
• /
• 2002

In Kwangjin industrial company, mill is operating for the foundry sand production at the rate of 25t/hr from quartzite. Foundry sands fall into four distinct categories: silica sand, lake sand, bank sand, and natural molding sand. Silica sand is a general term used to describe crushed, washed, graded, dried, and cooled clay-free sands. This study was conducted for the investigation of the foundry sand productivity and the life span of the hammer according to the material quality. The life time of hammer from several manufacturer were compared in order to find out the grinding efficiency of the various hammer material. In the result of tests, the life time of high-Mn hammer was 10.5 hours while that of high-Cr was 19.5 hours. The life time in case of typical worn shape hammers was about 12 hours and the average time of a blowhole hammer was about 6.5 hours.

• 한국지반신소재학회논문집
• /
• 제14권3호
• /
• pp.1-12
• /
• 2015

국내외에서 차수벽이나 흙막이 벽체로 많이 사용되고 있는 강널말뚝의 관입시 일반적으로 진동해머를 이용하여 시공하고 있다. 진동해머 중에서도 유압식 진동해머가 많이 사용되고 있는데, 진동해머의 시동을 켜고 끌 경우 진동해머 편심축의 이동에 따라 고유진동수의 변화로 진동해머에서 공진이 일어나 진동 및 소음이 크게 발생하는 문제점이 있다. 이에 본 연구에서는 일반 유압식 진동해머에서 발생하는 공진 발생에 의한 진동 및 소음을 줄이기 위하여 진폭가변형 유압진동해머를 개발하였다. 개발된 진폭가변형 유압진동해머는 두 쌍의 편심체 수평 각도를 조절하여 진동수 및 진폭을 조절할 수 있으며, 일반 유압식 진동해머와 개발된 진폭가변형 유압진동해머의 기진체 현장실험을 이용한 성능 평가 비교를 통해, 기존 일반 유압식 진동해머에 비해 진폭가변형 유압진동해머의 진동 및 소음이 감소함을 확인하였다. 또한 현장실험 결과 진폭가변형 유압진동해머는 굴삭기의 추력으로 인해 기존 전기식 진동해머에 비해 관입속도가 증가하였으며, 일반 유압식 진동해머에 비해서도 진폭가변으로 지반조건에 따라 관입속도가 빨라질 수 있음을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.599-600
• /
• 2010

• 대한기계학회논문집A
• /
• 제36권1호
• /
• pp.109-116
• /
• 2012

현재 천공장비 및 천공방법에 대한 많은 연구가 진행되고 있지만 DTH hammer의 타격성능을 규명하고 최적화에 대한 연구는 전무하다. 또한 DTH drilling의 시험 장비를 구축하기 위해서는 막대한 비용과 많은 시간이 요구되기 때문에 성능규명에 있어 시험적으로 접근하기가 매우 곤란한 실정이다. 따라서 본 논문에서는 DTH hammer의 구동원리를 파악 후 공압 해석을 이용하여 구동 특성 및 성능을 규명하였다. 또한 실험계획법을 이용하여 DTH hammer의 성능에 영향력이 있는 설계인자를 도출하고 이를 다구찌 기법에 적용해 DTH hammer의 타격성능인 타격수와 타격에너지의 최적화에 대한 연구를 수행하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제4권4호
• /
• pp.367-374
• /
• 2011

Water hammer pumps can effectively use the water hammer phenomenon in long-distance pipeline networks that include pumps and allow fluid transport without drive sources, such as electric motors. The results of experiments that examined the effect of the geometric form of water hammer pumps by considering their major dimensions have been reported. In addition, a paper has also been published analyzing the water hammer phenomenon numerically by using the characteristic curve method for comparison with experimental results. However, these conventional studies have not fully evaluated the pump performance in terms of pump head and flow rate, common measures indicating the performance of pumps. Therefore, as a first stage for the understanding of water hammer pump performance in comparison with the characteristics of typical turbo pumps, the previous paper experimentally examined how the hydrodynamic characteristics were affected by the inner diameter ratio of the drive and lifting pipes, the form of the air chamber, and the angle of the drive pipe. To understand the behavior of the components attached to the valve chamber and the air chamber that affects the performance of water hammer pumps, the previous study also determined the relationship between the water hammer pump performance and temporal changes in valve chamber and air chamber pressures according to the air chamber capacity. For the geometry of components attached to the drain valve, which is another major component of water hammer pumps, this study experimentally examines how the water hammer pump performance is affected by the length of the spring and the angle of the drain pipe.