• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.1211-1215
• /
• 2014

본 논문에서는 신소재 $Rb_2LiCeCl_6$ 할라이드 섬광체를 개발하고, 개발된 섬광체의 섬광 및 열형광 특성에 대하여 조사하였다. $Rb_2LiCeCl_6$의 섬광스펙트럼은 $Ce^{3+}$ 이온의 4f ${\rightarrow}$ 5d 천이에 따라 파장범위가 350~410 nm, 피이크 파장은 368 nm 및 378 nm이었다. 섬광감쇠시간 특성은 71 ns의 빠른 시간 특성 성분(85%)과 405 ns의 느린 성분(15%)의 2개로 구성되며, 잔광에 기여한 포획준위의 물리적 변수를 열형광 측정법에서 분석한 결과, 포획 준위의 활성화에너지, 발광차수 및 주파수 인자의 평균값은 각각 0.75 eV, 1.48 및 $3.0{\times}10^8s^{-1}$이었다.

• Tribology and Lubricants
• /
• 제30권6호
• /
• pp.323-329
• /
• 2014

The friction-reducing properties of lubricants containing ionic liquids based on ammonium dithiocarbamate are studied. The ionic liquids are produced through the following two steps: the synthesis of sodium alkyl dithiocarbamates via the substitution reaction of dialkylamine and carbon disulfide and their subsequent conversion into ammonium dithiocarbamate-based ionic liquids through an ion-exchange reaction with a quaternary alkyl ammonium halide salt. The structures of the ionic liquids are characterized by NMR spectroscopy and Fourier transform infrared spectroscopy. The isolated yields of the ionic liquids, which are viscous and pale yellow, are approximately 92%. The Brookfield viscosities and pour points of the ionic liquids are determined. Further, their wear resistances are measured through the four-ball wear test and the Schwingung Reibung Ver-schleiss (oscillation, friction, wear) test. The wear scar diameter of the lubricants containing 1 wt of the quaternary alkyl ammonium dithiocarbamate-based ionic liquids (0.475-0.631 mm) is significantly lower than that of the base oil (0.825 mm), proving that the ammonium dithiocarbamate-based ionic liquids have good friction-reducing characteristics. However, these friction-reducing characteristics fade significantly after long-term storage, owing to the degradation of the ionic liquids.

• 원예과학기술지
• /
• 제34권1호
• /
• pp.55-66
• /
• 2016

This study was carried out to investigate the effect of artificial light sources with different light qualities on the growth and flowering characteristics of a herbaceous long-day plant, Petunia ${\times}$ hybrida Hort. Seedlings of petunia cultivar 'Madness Rose' were potted, acclimated for one week, and grown in a phytotron equipped with tube- and bulb-type fluorescent lamps (FL tube and bulb), tube-type white light-emitting diodes (LED tube), halogen lamps (HL), metal halide lamps (MH), and high pressure sodium lamps (HPS) for 10 weeks. The temperature, photoperiod, and photosynthetic photon flux density (PPFD) in the phytotron were $22{\pm}2^{\circ}C$, 16 h, and $25{\pm}2{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. Light sources combined with HL promoted stem elongation, and plant height and internode length decreased with increasing red to far-red (R:FR) ratio. FL tube + LED tube, HPS, and FL tube promoted branching, whereas plants grown under light sources combined with HL did not have any branches. Days to flowering (from longest to shortest) occurred as follows: FL tube + HL > FL tube + HL > MH > HPS = FL tube + FL bulb > FL tube + LED tube > LED tube > FL tube, indicating that reducing the R:FR ratio of the light sources promoted flowering. Only 20% of plants grown under an FL tube flowered, whereas under all other treatments, 100% of plants flowered. At 10 weeks after treatment, plants grown under HPS and MH had (cumulatively) 12 open flowers, and those grown under FL tube + FL bulb, LED tube, FL tube + LED tube, and HPS treatment had approximately seven flower buds. These results suggest that light sources with low R:FR ratios promote flowering and stem elongation in petunia, but they reduce its ornamental value due to overgrowth and poor branching.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.326-333
• /
• 2014

This study was conducted to investigate the fishing efficiency of an improved LED fishing lamp for squids. A total of 31 fishing operations were carried out with six-crew commercial fishing vessel Haengbok-Ho (24 tons) on which 43.2kW LED was installed, along with 14 automatic jigging machines, from October 6 to November 16, 2012. The 19 fishing vessels with Haengbok-Ho were compared with a control subject was 24 tons or 29 tons. A total illuminating power of metal halide (MH) fishing lamps in the control fishing vessel was either 84kW or 120kW. The number of automatic jigging machines in the control vessels was 8-18 and the number of crews engaged for fishing operation was 3-13. Average fuel consumption of LED fishing vessels during fishing operation was 505.1l which led to an average fuel consumption of 42.7l per hour. LED fishing vessel and MH fishing vessel caught on an average 1,946 squids and 2,439 squids, respectively, during the study period. Crews (hand line and hand reel) caught about 2.2 times the automatic jigging machines for LED fishing vessel and about 2.1 times for MH fishing vessel. Meanwhile, catches by the fishing vessels with LED in the combined total number per one line of automatic jigging machine and per crew were 86.6% of that of the control fishing vessel with MH. Also, fishing vessels with LED per automatic jigging machine achieved 71.8% of catches of that with MH fishing lamp. The catches of squids per the fishing vessel with 1W LED fishing lamp were higher by more than 135.5% of that in the fishing vessel with MH, which showed a good fishing performance even with only the use of a LED fishing lamp.

• 한국기록관리학회지
• /
• 제3권2호
• /
• pp.143-155
• /
• 2003

역사적 사실이나 경험의 중요한 증거자료로서 보존적 가치를 지니는 사진은 보통의 다른 문서들과 달리 빛, 온도, 습도 등의 여러 가지 환경 요인에 따라 매우 쉽게 변형될 수 있기 때문에 보존에 따르는 과학적이고 세밀한 주의가 요구된다. 본 연구에서는 일반적으로 널리 시판되어 사용되고 있는 사진용 필름과 인화지들을 선택하여 노광을 주어 감도를 측정하고, 노화가속장치(Weather-o-meter)에 넣어 인위적으로 변형을 허용한 뒤 다시 감도를 측정하여 비교함으로써 감재의 보존특성을 비교분석 하였다. 실험결과 흑백감재의 보존특성이 컬러의 경우보다 우수했으며, Film보다 인화지의 경우가 노화에 따른 변형이 없는 것으로 나타났다. 그러나 제조회사에 따른 각 제품별 보존특성 차이는 크게 관찰되지 않았다.

• 약학회지
• /
• 제44권2호
• /
• pp.141-148
• /
• 2000

A new synthetic method of 6-(1-oxyalkyl)-5,8-dimethoxy-1,4-naphthoquinones was developed, 2-formyl-1,4,5,8-tetramethoxynaphthalene was oxidized to form 6-formyl-5,8-dimethoxy-1,4-naphthoquinone(DMNQ). This was selectively reduced and benzylated to produce 6-formyl-5,8-dimethoxy-1,4-dibenzyloxynaphthalene, to which various alkylmagnesium halide were added, followed by debenzylation and oxidation in sequence, yielding 6-(1-hydroxyalkyl)-DMNQ derivatives. 6-(1-hydroxyalkyl)-5,8-diethoxy-1,4-naphthalene (DENQ) derivatives were synthesized by similar procedure. 1'-OH of the naphthoquinone derivatives was acylated with various alkanoic acids to give 6-(1-acyloxyalkyl)-DMNQ or DENQ derivatives. TOPO-I inhibitory activity and cytotoxicity of DENQs were less potent than that of DMNQs. Among the DMNQ and DENQ analogues, the ones with alkyl group being heptyl were most potent in TOPO-I inhibition $IC_{50}$/; 30.1, 36.4 $\mu$M). DUNQ derivatives with a longer side chain exhibited a weaker cytotoxicity. A correlation between size of the alkyl side chain and cytotoxicity was not observed for DENQ derivatives. Acylation of 1'-hydroxyl group, in general, decreased both TOPO-I inhibitory activity and cytotoxicity T/C (%) values of the DENQ derivatives on S-180 intraperitoneal tumor were larger than those of DMNQ derivatives. Among the compounds synthesized,6-(1-hydroxyheptyl)-DENQ and 6-(1-hex-anoyloxyoctyl)-DMNQ showed the highest T/C values of 183% and 182%, respectively.

• 한국표면공학회지
• /
• 제52권2호
• /
• pp.90-95
• /
• 2019

Methylammonium lead bromide ($MAPbBr_3$) has attracted a lot of attention due to their excellent optoelectronic properties such as the compositional flexibility relevant to photoluminescence (PL) and UV-Vis absorbance spectrum, high diffusion length, and photoluminescence quantum yield (PLQY). Despite such advantages of organic-inorganic perovskite materials, more systematic study on manipulation of their optoelectronic properties in homo- or heterovalent metal ions doped halide perovskite nanocrystals is lacking. In this study, we systematically investigated the optical properties of colloidal $CH_3NH_3Pb_{1-x}Sn_xCl_{2x}Br_{3-2x}$ particles by addition of $SnCl_2$ into the typical methylammonium lead tribromide ($CH_3NH_3PbBr_3$) precursor solution. We found that only 1% addition of $SnCl_2$ shows a significant blue-shift from 540 nm to 420 nm in UV-Vis absorbance spectrum due to the strong quantum confinement effect. Furthermore, continuous blue-shift in photoluminescence spectra was observed as the amount of Cl increases. These experimental results provide new insights into the replacement of Pb within $MAPbBr_3$, required for the broadening of their application.

• Advances in nano research
• /
• 제13권2호
• /
• pp.187-197
• /
• 2022

The synthesis of organic and hybrid organic-inorganic perovskites directly from solution improves the cost- and energy-efficiency of processing. To date, numerous research efforts have been devoted to investigating the influence of the various solvent parameters for the synthesis of lead halide perovskites, focused on the effects of different single solvents on the efficiency of the resulting perovskites. In this work, we investigated the effect of solvent blends for the first time on the structure and phase of perovskites produced via the Lewis base vapor diffusion method to develop a new synthetic approach for water-stable CsPbBr₃ particles with nanometer-sized dimensions. Solvent blends prepared with DMF and water-miscible solvents with different Gutmann's donor numbers (D_N) affect the Pb ions differently, resulting in a variety of lead bromide species with various colors. The use of a DMF/isopropanol solvent mixture was found to induce the formation of the Ruddlesden-Popper perovskite based on lead bromide. This perovskite undergoes a blue color shift in the solvated state owing to the separation of nanoplatelets. In contrast, the replacement of isopropanol with DMSO, which has a high DN, induces the formation of spherical CsPbBr₃ perovskite nanoparticles that exhibit green emission. Finally, the integration of acetone in the solvent system leads to the formation of lead bromide complexes with a yellow-orange color and the perovskite CsPbBr₃.

• 방사성폐기물학회지
• /
• 제20권1호
• /
• pp.43-63
• /
• 2022

The aim of this review is to communicate some essential knowledge of the underlying mechanism of the corrosion of structural containment alloys during molten salt reactor operation in the context of prospective online monitoring in future MSR installations. The formation of metal halide species and the progression of their concentration in the molten salt do reflect containment corrosion, tracing the depletion of alloying metals at the alloy salt interface will assure safe conditions during reactor operation. Even though the progress of alloying metal halides concentrations in the molten salt do strongly understate actual corrosion rates, their prospective 1^st order kinetics followed by near-linearly increase is attributed to homogeneous matrix corrosion. The service life of the structural containment alloy is derived from homogeneous matrix corrosion and near-surface void formation but less so from intergranular cracking (IGC) and pitting corrosion. Online monitoring of corrosion species is of particular interest for molten chloride systems since besides the expected formation of chromium chloride species CrCl₂ and CrCl₃, other metal chloride species such as FeCl₂, FeCl₃, MoCl₂, MnCl₂ and NiCl₂ will form, depending on the selected structural alloy. The metal chloride concentrations should follow, after an incubation period of about 10,000 hours, a linear projection with a positive slope and a steady increase of < 1 ppm per day. During the incubation period, metal concentration show 1^st order kinetics and increasing linearly with time^1/2. Ideally, a linear increase reflects homogeneous matrix corrosion, while a sharp increase in the metal chloride concentration could set a warning flag for potential material failure within the projected service life, e.g. as result of intergranular cracking or pitting corrosion. Continuous monitoring of metal chloride concentrations can therefore provide direct information about the mechanism of the ongoing corrosion scenario and offer valuable information for a timely warning of prospective material failure.

• 청정기술
• /
• 제16권4호
• /
• pp.239-244
• /
• 2010

스파이로 구조의 플로렌 에폭사이드, 9,9'-Bis(4-oxiranylmethoxyphenyl) fluorine (2)를 4차 암모니늄 또는 인산염을 촉매를 사용하여 이산화탄소와 반응시켜 5각고리의 플로렌 카보네이트 화합물로 전환시켰다. 이 과정은 주요 온실가스의 하나인 초임계 조건의 이산화탄소를 C-1 재료로 쓰고 동시에 반응용매로 이용하는 청정반응의 한 예로 볼 수 있다. 4차염의 종류와 반응조건이 반응에 미치는 영향에 대해 조사한 결과, 촉매의 음이온의 종류, 알킬 치환기, 반응온도가 반응에 큰 영향을 미치는 것으로 나타났다. 브롬화 사부틸 암모늄 촉매 (2 mol%)를 쓰고 플로레닐 에폭사이드를 75.9 bar 압력의 이산화탄소를 393 K에서 반응시켰을 때 플로레닐 카보네이트를 92% 수율로 얻을 수 있었다.