• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.76-84
• /
• 2010

The aim of this study is to analyze the effect of the ethanol blending in diesel-ethanol blended fuels on the spray and combustion characteristics in a common-rail four-cylinder diesel engine. For the analysis of the spray characteristics, the spray images were obtained using a high speed camera with metal-halide lamps. From these spray images, the macroscopic spray characteristics such as the spray tip penetration and spray cone angle were investigated. Also, the combustion characteristics including the combustion pressure and the rate of heat release were studied with the analysis of the exhaust emissions in diesel-ethanol blended fuel driven diesel engine. It can be confirmed from the experiment on spray characteristics of diesel-ethanol blended fuels that the increased ethanol blending ratio induced the decrease of the spray tip penetration after the end of the injection. The spray cone angle slightly increased by the blending of ethanol fuel. In the experiment on atomization characteristics, the ethanol blending caused the improvement of the diesel atomization performance. On the other hand, at the same engine load condition, the increase of the ethanol blending ratio lead to lengthen the ignition delays, and to decrease the peak combustion pressure and the rate of heat release. Totally, the combustion and emission characteristics of ULSD and DE10 showed similar characteristics. However, in the case of DE20, CO and HC rapidly increased, and $NO_x$ decreased. It can be believed that 20% ethanol disturbed the combustion of diesel-ethanol blended fuel due to the low cetane number and evaporation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.1 s.108
• /
• pp.1-9
• /
• 2005

The purpose of this study is to form a night-view at a university to satisfy users through case studies of four representative university campuses with analyzing the lighting conditions and facility satisfaction. The result of this study is following. From the present lighting status, there are 664(l9types) lightings at Kyunghee University, 350(17types) at Sungkyunkwan University and 437(l9types) at Ajou University. Main materials of the lightings are metal, iron and stainless. Moreover, most illuminants are white-colored metal-halide lamp. There is no specially designed lighting facility because ready-made goods were used. Furthermore, the locations of lightings are not suitable so some are useless. Most main spatial illuminations are not satisfying outdoor standard, so it can be concluded that the designs of present campuses are not carrying on with-out plans. From the result, present campus lighting does not satisfy the desire of users in aesthetic and functional point of view but consider the luminosity. However, even though the luminosity does not standardize the law. It is because the design does not reflect a suitable standard with desire of users and it does not have a long term plan. Moreover, the campus design has no study about development plan even though it has enough green area which has a potential possibility to overcome the lack of green areas in a city. Therefore, it is needed to design a comprehensive campus plan which satisfies the desire of students and residents with considering promotion of excitement and harmony through adjusting luminosity of the lighting facilities and supplying various lighting resources.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.169-175
• /
• 1998

The plasma etching of polysilicon was performed with the HBr/$Cl_2/He-O_2$ gas mixture. The residual layers after photoresist strip were investigated using x-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The etch residue was identified as silicon oxide deposited on the top of the patterned polysilicon. In order to clarify the formation mechanism of the etch residue, the effects of various gas mixtures such as $Cl_2/He-O_2$and HBr/$Cl_2$were investigated. We found that the etch residue is well formed in the presence of oxygen, suggesting that the etch residue is caused by the reaction of oxvgen and non-volatile silicon halide compounds. Wet cleaning and dry etch cleaning processes were applied to remove the polysilicon etch residue, which can affect the electrical characteristics and further device processes. XPS results show that the wet cleaning is suitable for the removal of the etch residue.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.4
• /
• pp.385-394
• /
• 2013

This study has conducted a comparative analysis on the fishing efficiency of LED fishing lamps by squid jigging vessels, the Yeongrak-ho (16 tons) and Somang-ho (9.77 tons), which operated during September and October 2010 and during October 2011, comparing with MH (Metal Halide) fishing lamp-equipped fishing vessels. This study has also examined vessel's fuel consumption level. The light powers of LED fishing lamps of the Yeongrak-ho and Somang-ho were 25.8kW and 32kW, respectively. Those of the MH fishing vessels, that is, the MH fishing lamp-equipped fishing vessels, were 105kW and 81kW, respectively. The average squid catch in number of an LED vessel, Yeongrak-ho, was 39.2% of the MH fishing lamp-equipped fishing vessels; however, that of the Somang-ho improved to 78.7% of the MH fishing lamp-equipped vessels. Average catch in number by Yeongrak-ho crew was 2.6 times more than catch in number by automatic jigging machines. Average catch in number by MH fishing vessel crew was 1.8 times more than that by automatic jigging machines. An LED vessel, Yeongrak-ho's fishing rate was 17.5%~152.2% of the MH fishing vessels, that is, 61.1% on average, in comparison of combined catch in number per automatic jigging machine and per crewmember. Somang-ho's fishing rate was 6.7%~127.6% of the MH fishing vessels, that is, 73.1% on average. The average fuel consumption level of the Somang-ho, throughout its departure from to arrival at the port, was 475.7l, and that during fishing hours was 109.6l, or 23.0% of the total fuel consumption level. Somang-ho's fuel consumption level per fishing hour was 9.7l on average.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.7-18
• /
• 2006

This study aims to analyze the illumination effects of bridges across the Han River. For the purpose, 8 bridges were selected. Field survey and measurements were performed, and the physical values such as luminance, color temperature and chromaticity were measured by Radiant Imaging Prometric 1400 Color. The results of the study are as follows; (1) Metal halide lamp, sodium lamp and LED(Light Emitting Diode) of various colors, are used in illuminating the bridges and create color contrasts and color changing by color filters. (2) Luminance contrast of the illuminated bridges affects 'modeling' and 'spare sense' of bridges, and it might improve people's preference and impression. (3) Color temperature of the illuminated bridges is influenced by 'color of bridge', 'material of bridge' and, 'color temperature and color of light sources'. (4) 'Structure of bridges' and 'luminaires' influence on the physical feature of the bridges. Especially, illumination of the bridges shows resemblant patterns by 'structure of bridges'.

• Korean Journal of Crystallography
• /
• v.5 no.1
• /
• pp.24-32
• /
• 1994

The study of (0001), (1120) and (1011) GAN epitaxy films grown on the (0001),(1012) and (1120) α-Al2O3 substrates have been investigated using the haliar vapor phaes epitaxy(HVPE) method in Ga/HCI/NH3/He system. XRD, RHEED and SEM are used for the study of the films struction and surface morphology. Chemical composition of the film surface is estimsted by XPS. The following orientation relationships are observed; (0001) GaN /(0001) Al2O3 (1120) GaN/ (1012) Al2O3 and (0001) and (1011) GaN/ (1120) Al2O3 in accordance with growth conditions. The (0001) GaN films grown on(0001) and (1120) a-Al2O3 substrates at higer temperature(1050℃) have shown two dimensional grownth mechanism. Form SEM and RHEED, the smoother surface morphology and better structure are observed for the (1011) GaN films grown on (1120) sapphire at higer temperature.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.589-593
• /
• 2003

Silica based Planar Lightwave Circuits (PLC) have been applied to various kinds of wave-guided optical passive devices. SiO$_2$ (buffer) and GeO$_2$-SiO$_2$ (core) thick films have been deposited by Flame Hydrolysis Deposition (FHD). The SiO$_2$ films were produced by the flame hydrolysis reaction of halide materials such as SiCl$_4$, POCl$_3$ and BCl$_3$ into an oxy-hydrogen torch. The P concentration increased from 2.0 to 2.8 at％ on increasing the POCl$_3$/BCl$_3$ flow ratio. The refractive index increased from 1.4584 to 1.4605 on increasing the POC1$_3$/BC1$_3$ flow ratio from 0.6 to 2.6. The refractive index of GeO$_2$-SiO$_2$ films was controlled by the GeCl$_4$ flow rate. The refractive index increased from 1.4615 to 1.4809 on increasing the GeCl$_4$ flow rate from 30 to 120 sccm.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.21 no.4
• /
• pp.321-328
• /
• 2018

Purpose: Feeding children is a problem in pediatric intensive care units (PICU) and it is difficult to know the correct amount. The purpose of this study is to evaluate if prealbumin or retinol binding proteins (RBP) are effective relative to daily enteral nutrition, without being affected by severity of diseases or infections and can be used to follow up nutritional amount. Methods: This is a prospective observational study that includes 81 patients admitted to PICU in Akdeniz University with estimated duration >72 hours, age between 1 month and 8 years. Daily calorie and protein intake were calculated and prealbumin, RBP and C-reactive protein (CRP) levels were measured on the first, third, fifth and seventh mornings. Results: We find moderate correlation between daily calorie intake and prealbumin levels (r=0.432, p<0.001), RBP levels and daily protein intake (r=0.330, p<0.001). When we investigated the relationship between changes of prealbumin, RBP, CRP, calorie and protein intake during intensive care stay, we found that increase of Prealbumin and RBP levels are explained by decrease of CRP levels (r=-0.546 and -0.645, p<0.001) and not with increase of nourishment. Conclusion: Even adjusted for PRISM3, age and CRP, prealbumin and RBP are correlated with last 24 hours' diet. However, it is not convenient to use as a follow up biomarker because increase of their levels is related with decrease of CRP levels.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.2
• /
• pp.309-311
• /
• 2005

Single crystals of the new pentanary thiophosphate, $K_{0.5}Ag_{0.5}Nb_2PS_{10}$ has been prepared through reactions of the elements with halide fluxes. The structure of $K_{0.5}Ag_{0.5}Nb_2PS_{10}$ has been analyzed by single crystal X-ray diffraction technique. The structure of $K_{0.5}Ag_{0.5}Nb_2PS_{10}$ is made up of one-dimensional ${^{\infty}_1}[Nb_2PS_{10}]$ chains along the [001] direction and these chains are separated from one another by $Ag^+$ and disordered $K^+$ ions. This chain is basically built up from bicapped trigonal prismatic [Nb2S12] units and tetrahedral [PS4] groups. The [$Nb_2S_{12}$] units are connected together to form the linear chain, ${^{\infty}_1}[Nb_2S_9]$ by sharing the S-S prism edge. Short (2.885(2) $\AA$ or 2.888(2) $\AA$) and long (3.743(1) $\AA$) Nb-Nb distances are alternating along the chain, and the $S_2{^2-}]\;and\;S^{2-}$anionic species are observed. The distorted octahedral coordination around the $Ag^+$ ion can be described as [2+4] bonding interaction.

• The Plant Pathology Journal
• /
• v.19 no.5
• /
• pp.260-265
• /
• 2003

Gummy stem blight caused by Didymella bryoniae occurs exclusively in cucurbits. This fungus has been known not to produce its pycnidium in vitro unless irradiated. In this study, cultural conditions for the mass-production of pycnidiospore by Metal Halide (MH) lamp irradiation were maximized. The mycelia were cultured at $26^{\circ}C$ on PDA for 2 days under dark condition, and then the plate was illuminated with MH lamp continuously for 3-4 days at $26^{\circ}C$. Results show that a great number of pycnidia were simultaneously formed. The pycnidiospores produced were then used as immunogen. Fusions of myeloma cell (v-653) with splenocytes from immunized mice were carried out. Two hybridoma cell lines that recognized the immunogen D. bryoniae were obtained. One monoclonal antibody (MAb), Dbl, recognized the supernatant while another MAb, Db15, recognized the spore. Two clones were selected which were used to produce ascite fluid of the two MAb, Dbl and Db15, the immunotypes of which were identified as IgG1 and IgG2b, respectively. Titers of MAb Dbl and MAb Db15 were measured and the absorbance exceeded 0.5 even at a $10^{-5}$ dilution. The MAbs reacted positively with D. bryoniae but none reacted with other viral isolates, Cucumber mosaic virus and Cucumber green mottle mosaic virus. Sensitivity of MAb was precise enough to detect spore concentration as low as $10^{-3}$/well by indirect ELISA. Characterization of the MAbs Dbl, Db15 antigen by heat and protease treatments, which suggests that the epitope recognized by these two MAbs was glycoprotein.