• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.3
• /
• pp.157-165
• /
• 2019

Recently, large and small earthquakes have occurred in the Korean peninsula. In this sense, Korea is no longer considered as an earthquake free zone. Especially, it is necessary to respond quickly to earthquake tsunami which may be caused by the influence of neighboring countries with large earthquakes. Since the occurrence of tsunamis can cause great casualties, it is very important to allocate the location of the shelter in case of an earthquake. Although many researches on shelter allocation have been conducted in various ways, but most of them have been analyzed based on administrative district resident data, resulting in a lack of reality. In this study, floating population data were used to reflect reality in case of emergency situations, and genetic algorithm, which produce good results among the heuristic algorithms, was used to select shelter locations. The number of evacuees was used as a objective function of genetic algorithm and the optimal solution was found through selection, crossover and mutation. As a result of the research on Busan Haeundae-Gu, selected as a research area, allocating eight shelters was the most efficient. The location of the new shelters was selected not only in residential areas but also in major tourist areas whose results can not be derived from administrative district resident data alone, and the importance of utilizing the floating population data was confirmed through this study.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.121-129
• /
• 2019

In Korea, life safety assessment through simulation are mandatory in performance-based design. Generally, there are three types of methods for simulation-based life safety assessments: the non-coupling method that compares available safe egress time (ASET) and required safe egress time (RSET) at a specific point through conducting fire and assessment simulations independently; the semi-coupling method that compares fire and evacuation simulation results by overlaying the result screens; and the coupling method that compares the results of fire effect simulation to an evacuation simulation. Of these methods, all designers in South Korea have used the only non-coupling method. In the non-coupling method, it is important to determine the location of a specific point to compare ASET and RSET. However, without any defined regulation, setting the location is determined based on the designer's experience and knowledge. The number of specific locations and the locations themselves differ with each designer, which can produce contrasting results in a life safety assessment. Therefore, this study conducted a life safety assessment based on the three methods (non-coupling, semi-coupling and coupling) and compared each of the results. Furthermore this study suggests a improvement way in particular for the computer simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.231-240
• /
• 2019

The purpose of this study is to understand of flipped learning of vocational high school teachers and to provide basic data of teacher training program development that can support flipped learning classes of vocational high school. We conducted surveys and focus group interviews to solve these research problems. The focus group interview is conducted on four flipped learning teachers who participated in the questionnaire. The results of this study are as follows. First, vocational high school teachers only heard the term 'flipped learning', but they did not have much experience in class. Second, it is necessary to learn contents and pre-learning for basic understanding of flipped learning, method of making learning contents of learning materials that focused on students' motivation and interest in the classroom. Also, we needed a method to induce participation in classroom activities, and a compensation method and evaluation method to maintain it. In addition, they requested specific flipped learning instruction procedures and various learning materials at each stage in accordance with the vocational high school situation. Third, I requested training contents and practice - centered training method that can induce interest and motivation as the training management method for the vocational high school teachers' flipped learning classes. In addition, it required step - by - step training according to the understanding level of flipped learning of high school teacher.

• Journal of Rheumatic Diseases
• /
• v.24 no.4
• /
• pp.227-235
• /
• 2017

Objective. Failure of first-line anti-tumor necrosis factor (TNF) agents in in rheumatoid arthritis patients leads to decisions among second-line biologic agents. To better inform these decisions, the therapeutic effectiveness of rituximab is compared with other second-line biologic agents in this observational study. Methods. Between November 2011 and December 2014, study subjects were observed for 12 month periods. Patients with an inadequate response to initial anti-TNF agent received either rituximab or alternative anti-TNF agents (adalimumab/etanercept/infliximab) based on the preference of patients and physicians. The efficacy end point of this study was the change in 28-joint count Disease Activity Score (DAS28) at six and 12 months from baseline. Safety data were also collected. Results. Ninety patients were enrolled in the study. DAS28 at six months did not change significantly whether the patients were treated with rituximab or alternative anti-TNF agents in intention-to-treat analysis (n=34, $-1.63{\pm}0.30$ vs. n=31, $-2.05{\pm}0.34$) and standard population set analysis (n=31, $-1.51{\pm}0.29$ vs. n=24, $-2.21{\pm}0.34$). Similarly, the change in DAS28 at 12 months did not reach statistical significance ($-1.82{\pm}0.35$ in the rituximab vs. $-2.34{\pm}0.44$ in the alternative anti-TNF agents, p=0.2390). Furthermore, the incidences of adverse events were similar between two groups (23.5% for rituximab group vs. 25.8% for alternative anti-TNF agents group, p=0.7851). Conclusion. Despite the limitations of our study, switching to rituximab or alternative anti-TNF agents after failure of the initial TNF antagonist showed no significant therapeutic difference in DAS28 reduction.

• Journal of the Korean Society of Radiology
• /
• v.13 no.5
• /
• pp.683-689
• /
• 2019

We are trying to evaluate usefulness of Wide Coverage Volume Axial Mode by comparing and analyzing for exposure doses to patients and video quality extracted from two materials. First material is a computer tomography scanning of paediatric cardiac made by using High Pitch Mode, which is designed for diagnosing Congenital cardiac diseases. Second material is computer tomography scanning of paediatric cardiac made by using Wide Coverage Volume Axial Mode. When we did computer tomography scanning of paediatric cardiac, we used High Pitch Mode and Wide Coverage Volume Axial Mode to 50 patients of each, overall 100 patients. Also, we compared exposure doses to patients using videos got from each protocol. Then we compared video quality by calculating SNR and CNR by setting ROI of each. Not only exposure doses to patients were reduced by 13.07 %, but also SNR and CNR were improved when testing used Wide Coverage Volume Axial Mode rather than using High Pitch Mode. Wide Coverage Volume Axial Mode reduced testing time by using high-speed scanner. Furthermore, we can find out that Wide Coverage Volume Axial Mode is an useful method through improving video quality and reducing exposure doses to patients than using High Pitch Mode from ASiR-V, which is low-dose technology.

• Journal of the Korean Society of Radiology
• /
• v.16 no.2
• /
• pp.131-139
• /
• 2022

The purpose of this study was to insert a pedicle screw into a pig thoracic vertebrae, a general CT scan(Non MAR), and a thoracic axial image obtained with the Metallic Artifact Reduction for Orthopedic Implants (O-MAR) to reduce artifacts. The image obtained by reconstructing the algorithm (Standard, Soft, Bone, Detail) was used using the image J program. Signal to noise ratio(SNR) and contrast to noise ratio(CNR) were compared and analyzed by obtaining measured values based on the given equation. And this study was to investigate tube voltage and algorithm suitable for CT scan for thoracic pedicle screw insertion. As a result, when non-MAR was used, the soft algorithm showed the highest SNR and CNR at 80, 100, 120, and 140 kVp, On the other hand, when MAR was used, the standard algorithm showed the highest at 80 kVp, and the standard and soft algorithms showed similar values at 100 kVp. At 120 kVp, the Soft and Standard algorithms showed similar values, and at 140 kVp, the Soft algorithm showed the highest SNR and CNR. Therefore, when comparing Non-MAR and MAR, even if MAR was used, SNR and CNR did not increase in all algorithms according to the change in tube voltage. In conclusion, it is judged that it is advantageous to use the Soft algorithm at 80, 100, 120, and 140 kVp in Non MAR, the Standard algorithm at 80 and 100 kVp in MAR, and the Soft algorithm at 120 and 140 kVp. This study is expected to serve as an opportunity to further improve the quality of images by using selective tube voltage and algorithms as basic data to help evaluate images of pedicle screw CT scans in the future.

• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.233-240
• /
• 2022

Research on the presence or absence of radiation shielding for FDM-type filaments has recently begun to be studied, but filaments with shielding capabilities are not sold in Korea, and not studies yet. Therefore, in this research, we will use HDPE (High Density Polyethylene) as a base material, select bismuth as a reinforcing material to manufacture a composite filament, evaluate the shielding ability, and provide basic data for the development of a radiation shielding composite material using 3D printing.A filament is produced by mixing Bismuth with an effective atomic number 83 with HDPE of PE series and adjusting the content of Bismuth to 20% wt, 30% wt, 40% wt. Compounded filaments were evaluated for their physical properties and shielding capabilities by ASTM evaluation methods. As the bismuth content increases, the density, weight, and tensile strength increase, and the shielding capacity is confirmed to be excellent. As a result of the radiation shielding capacity evaluation, it was confirmed that HDPE (80%) + Bi (20%) showed a shielding rate of 82% at 60 kV and a shielding rate of up to 94% or more at 40% bismuth content. In this study, we confirmed that it was possible to produce a radiation shield that is lighter than the metal particle-containing filaments. Furthermore, that have been shield radiation by using HDPE + Bi filaments, and radiation in the medical and radiation industries. The possibility of using it as a shielding complex was confirmed.

• Journal of the Korean Society of Radiology
• /
• v.16 no.2
• /
• pp.77-85
• /
• 2022

The purpose of this study was to investigate the status of infection control of angiography room workers through a survey, and to find out their awareness and performance. A survey was conducted from January 3 to February 28, 2022 on 126 workers working in angiography room of 10 hospitals at or above general hospital level located in Busan City. The questionnaire consists of 10 general characteristics of the subject and 56 items in total, divided into 4 main items of infection control in an angiography room: infection control system in a medical institution, personal hygiene, angiography room environment, and angiography room equipment. was measured on a Likert 5-point scale. Data analysis was performed statistically using SPSS for WindowTM release 25.0. t-test and one-way ANOVA were used to analyze the awareness and performance of each domain according to general characteristics, and Pearson correlation analysis was performed for the relationship between variables. As a result, the awareness level was higher than the performance level in all areas, indicating that the performance level was lower than the awareness level. In addition, awareness and performance showed a positive correlation, suggesting that the degree of awareness of workers is an important variable in infection control that has a significant effect on performance. Therefore, for effective and systematic infection control, workers in angiography room must improve the performance of infection control. In order to do that, infection control education is needed, and it is judged that infection control guidelines for angiography room should be systematized in the future.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.4
• /
• pp.65-84
• /
• 2021

The purpose of this study was to develop and evaluate the Home Economics(HE) Flipped Problem-Based Learning(FPBL) education plans focusing on 'food selection and storage' unit for middle school students. The results of this study are as follows. First, middle school students who participated in the class had mainly experienced lecture-style classes previously, but they preferred group activity classes to lecture-style classes. Their 'preferred on-line class tools' was 'Miricanvas', and the 'helpful on-line class tools for learning' was 'Tinkerbell'. Second, the HE FPBL education plan was designed and developed to conduct block time classes, twice a week for 3 weeks by applying the '13 stages of FPBL'. The main topic of the class is "food selection and storage that protects health and the environment". The practical and unstructured problems in the FPBL was to participate in the 'Food Selection and Storage to Protect Health and Environment' mission development contest of a TV entertainment program. Learning materials(stepping video, reading materials, activity sheets, and evaluation tools for process-based evaluation) were developed. The 206 senior students at a middle school in Haeundae-gu, Busan, took the class for three weeks and evaluated it as a good class that helps them learn, is satisfactory, interesting, and suitable, leads to class participation, and is differentiated from other teaching methods.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.3
• /
• pp.65-84
• /
• 2023

In order to establish a balanced development plan at the local government level, it is necessary to understand the current urban spatial structure. In particular, since the central area is a key element of balanced development, it is necessary to accurately identify its location and size. Therefore, the purpose of this study was to identify the central area system for Busan and to derive underprivileged areas that were alienated from the service areas where the functions of the central area could be used. To identify the central area system, four indicators(De facto Population, Land Price, Commercial Buildings, Credit Card Consumption) were used to calculate the central area index, and Getis-Ord Gi* and DBSCAN analysis were performed. Next, the hierarchy of the central areas were classified and the service areas were derived through network analysis by using it. As a result of the analysis, a total of 12 central areas were found in Seomyeon, Jungang, Yeonsan, Jangsan, Haeundae, Deokcheon, Dongnae, Daeyeon, Sasang, Pusan National University, Busan Station, and Sajik. Most of the underprivileged areas affected by the central area appeared in the Eastern area of Busan and the Western area of Busan, and were derived from old industrial areas, residential areas, and some new cities. Based on the results of the study, we can find three meanings. First, we have made a new attempt to apply a machine learning methodology that has not been covered in previous studies. Second, our data show the difference between the actual data and the existing planned central areas. Third, we not only found the location of the central areas, but also identified the underprivileged areas.